Del Ensanche a la ciudad actual: transformaciones en la idea de ciudad y en la forma de construirla: Pamplona desde 1915

Peer Reviewe

On the origin of the extra capacity at low potential in materials for Li batteries reacting through conversion reaction

The possibility of interfacial storage at low potential for electrode materials reacting through conversion reactions was evaluated. The amount of charge that could be stored through the proposed interfacial mechanism was estimated for a range of different materials and found to be much lower than those observed experimentally. Moreover, the slope of the potential decay and the influence of the current in the extent of stored capacity for experiments carried out in composite electrodes containing Co3O4 are not consistent with a capacitive-like mechanism. In summary, no evidence for capacitive storage could be found, our results being in agreement with the process taking place at low potential being solely related to electrolyte decomposition

Ámbitos y escalas en el urbanismo de Pamplona: de las “neighborhood units” a las unidades de ordenación

Pese a su descrédito en los términos en que habían sido formuladas, las comunidades, las unidades vecinales, siguieron estando presentes en el planeamiento. La sociología urbana, al menos, siguió ocupándose de ellas, sobre todo al definir los ámbitos de referencia de los equipamientos. El objeto de la investigación consiste en tratar de saber que fue de ellas después.Peer Reviewe

Monolithic Carbide-Derived Carbon Films for Micro-Supercapacitors

Microbatteries with dimensions of tens to hundreds of micrometers that are produced by common microfabrication techniques are poised to provide integration of power sources onto electronic devices, but they still suffer from poor cycle lifetime, as well as power and temperature range of operation issues that are alleviated with the use of supercapacitors. There have been a few reports on thin-film and other micro-supercapacitors, but they are either too thin to provide sufficient energy or the technology is not scalable. By etching supercapacitor electrodes into conductive titanium carbide substrates, we demonstrate that monolithic carbon films lead to a volumetric capacity exceeding that of micro- and macroscale supercapacitors reported thus far, by a factor of 2. This study also provides the framework for integration of high-performance micro-supercapacitors onto a variety of devices

Evidence for electronic and ionic limitations at the origin of the second voltage plateau in nickel electrodes, as deduced from impedance spectroscopy measurements

The second plateau occurring during the reduction of the nickel oxyhydroxide electrode (NOE) was studied by impedance spectroscopy on a cell with a pasted electrode prepared from commercial undoped -Ni(OH)2. Measurements were performed at diverse states of reduction and a large variation of impedance upon the transition from the first to the second plateau was observed. This variation mainly takes place at low frequencies and is hence related to ionic diffusion. We observed that the impedance becomes more capacitive on the second plateau meaning that the proton diffusion is limited. These results would be consistent with the gradual formation of an insulating layer of nickel hydroxide at the interface between the NOE and the electrolyte upon reduction. Once this layer becomes compact the ionic diffusion would be hindered and forced to occur through this layer, which could explain the voltage drop observed

Electrochemical Kinetic Study of LiFePO4 Using Cavity Microelectrode

Lithium cation insertion and extraction in LiFePO4 were electrochemically studied with a cavity microelectrode (CME). Cyclic voltammetry measurements were used to characterize the kinetics of the material. LiFePO4 was successfully cycled from 0.1 mV s–1 up to 1 V s–1 and is therefore a suitable material to be used in high power applications, such as asymmetric hybrid supercapacitors. Several kinetic behaviors were observed depending on the sweep rate. The LiFePO4 was found to follow different kinetics behaviors depending of the sweep rate. The charge storage mechanisms were investigated for Liþ extraction/insertion

Monolithic Carbide-Derived Carbon Films for Micro-Supercapacitors

Microbatteries with dimensions of tens to hundreds of micrometers that are produced by common microfabrication techniques are poised to provide integration of power sources onto electronic devices, but they still suffer from poor cycle lifetime, as well as power and temperature range of operation issues that are alleviated with the use of supercapacitors. There have been a few reports on thin-film and other micro-supercapacitors, but they are either too thin to provide sufficient energy or the technology is not scalable. By etching supercapacitor electrodes into conductive titanium carbide substrates, we demonstrate that monolithic carbon films lead to a volumetric capacity exceeding that of micro- and macroscale supercapacitors reported thus far, by a factor of 2. This study also provides the framework for integration of high-performance micro-supercapacitors onto a variety of devices

Steric effects in adsorption of ions from mixed electrolytes into microporous carbon

With the goal to improve the capacitance in electrochemical double-layer capacitors (EDLCs) many studies on pore size/ion size relationship have been undertaken to achieve a better understanding of the charge storage mechanism in the electrochemical double-layer in confinement. A significant capacitance increase was achieved by using carbon electrodes with micropores (b1 nm), when the carbon pore size was close to the ion size. In this paper, the accessibility of narrow pores is investigated by selecting a carbon with a small pore size (b0.7 nm) and electrolyte mixtures with different ion sizes. It has been shown that the adsorption capacitance limitation observed for large cations and anions could be overcome by adding ions with a smaller effective size. This result demonstrates that the pores are accessible when their size matches the effective ion size and contradicts the surface saturation assumption; effective ion size which exceeds the pore size leads to current limitation. This work confirms that the steric effect is involved when ions are adsorbed into pores and highlights the importance of controlling ion size/pore size relationship for optimisation of the capacitive performance of EDLC devices

Original Conductive Nano-Co3O4 Investigated as Electrode Material for Hybrid Supercapacitors

Cobalt oxides have been extensively used as conductive additives for Ni-MH batteries. We report in this paper the performances of an original nanometric cobalt oxide, close to Co3O4, as electrode material for hybrid supercapacitors. This spinel type phase contains hydrogen, lithium, cobalt vacancies, and especially Co4þ ions within the structure, leading to a high electronic conductivity. Cyclic voltammetry and impedance spectroscopy measurements show interesting capacitance (320 F/g in 8M-KOH), as well as good electrochemical cycling with a small amount of carbon black (5%)

Electrophoretic silica-coating process on a nano-structured copper electrode

A method for silica-coating at the nanoscale by electrophoretic deposition is presented here, using raw or grafted silica dispersions