Magnetoplasmon excitations in an array of periodically modulated quantum wires

Motivated by the recent experiment of Hochgraefe et al., we have investigated the magnetoplasmon excitations in a periodic array of quantum wires with a periodic modulation along the wire direction. The equilibrium and dynamic properties of the system are treated self-consistently within the Thomas-Fermi-Dirac-von Weizsaecker approximation. A calculation of the dynamical response of the system to a far-infrared radiation field reveals a resonant anticrossing between the Kohn mode and a finite-wavevector longitudinal excitation which is induced by the density modulation along the wires. Our theoretical calculations are found to be in excellent agreement with experiment.Comment: 9 pages, 8 figure

The effect of inhaled nitric oxide on shunt fraction in mechanically ventilated patients with COVID‑19 pneumonia

Studies in patients with severe acute respiratory distress syndrome (ARDS) with refractory hypoxaemia suggest that inhaled nitric oxide (iNO) can be added to ventilatory strategies as a potential bridge to clinical improvement. However, the potential role of iNO as a management strategy in severe COVID-19 pneumonia remains unclear. The authors describe their clinical findings of using iNO for severe COVID-19 pneumonia in 10 patients with refractory hypoxaemia in a tertiary respiratory intensive care unit. The results showed an improvement in shunt fraction, P/F ratio, PaO2 and arterial oxygen saturation but the improvements did not translate into a mortality benefit. This report adds to the current body of literature indicating that the correct indications, timing, dose and duration of iNO therapy and how to harness its pleiotropic effects still remain to be elucidated

Magnetoplasmon excitations in arrays of circular and noncircular quantum dots

We have investigated the magnetoplasmon excitations in arrays of circular and noncircular quantum dots within the Thomas-Fermi-Dirac-von Weizs\"acker approximation. Deviations from the ideal collective excitations of isolated parabolically confined electrons arise from local perturbations of the confining potential as well as interdot Coulomb interactions. The latter are unimportant unless the interdot separations are of the order of the size of the dots. Local perturbations such as radial anharmonicity and noncircular symmetry lead to clear signatures of the violation of the generalized Kohn theorem. In particular, the reduction of the local symmetry from SO(2) to $C_4$ results in a resonant coupling of different modes and an observable anticrossing behaviour in the power absorption spectrum. Our results are in good agreement with recent far-infrared (FIR) transmission experiments.Comment: 25 pages, 6 figures, typeset in RevTe

Thomas-Fermi-Dirac-von Weizsacker hydrodynamics in laterally modulated electronic systems

We have studied the collective plasma excitations of a two-dimensional electron gas with an arbitrary lateral charge-density modulation. The dynamics is formulated using a previously developed hydrodynamic theory based on the Thomas-Fermi-Dirac-von Weizsacker approximation. In this approach, both the equilibrium and dynamical properties of the periodically modulated electron gas are treated in a consistent fashion. We pay particular attention to the evolution of the collective excitations as the system undergoes the transition from the ideal two-dimensional limit to the highly-localized one-dimensional limit. We also calculate the power absorption in the long-wavelength limit to illustrate the effect of the modulation on the modes probed by far-infrared (FIR) transmission spectroscopy.Comment: 27 page Revtex file, 15 Postscript figure

Correction for a measurement artifact of the Multi-Angle Absorption Photometer (MAAP) at high black carbon mass concentration levels

The Multi-Angle Absorption Photometer (MAAP) is a widely-used instrument for aerosol black carbon (BC) measurements. In this paper, we show correction methods for an artifact found to affect the instrument accuracy in environments characterized by high black carbon concentrations. The artifact occurs after a filter spot change – as BC mass is accumulated on a fresh filter spot, the attenuation of the light (raw signal) is weaker than anticipated. This causes a sudden decrease, followed by a gradual increase in measured BC concentration. The artifact is present in the data when the BC concentration exceeds ~3 μg m<sup>−3</sup> at the typical MAAP flow rate of 16.7 L min<sup>−1</sup> or 1 m<sup>3</sup> h<sup>−1</sup>. The artifact is caused by erroneous dark counts in the photodetector measuring the transmitted light, in combination with an instrument internal averaging procedure of the photodetector raw signals. It was found that, in addition to the erroneous temporal response of the data, concentrations higher than 9 μg m<sup>−3</sup> (at the flow rate of 16.7 L min<sup>−1</sup>) are underestimated by the MAAP. The underestimation increases with increasing BC accumulation rate. At a flow rate of 16.7 L min<sup>−1</sup> and concentration of about 24 μg m<sup>−3</sup> (BC accumulation rate ~0.4 μg min<sup>−1</sup>), the underestimation is about 30%. There are two ways of overcoming the MAAP artifact. One method is by logging the raw signal of the 165° photomultiplier measuring the reflected light from the filter spot. As this signal is not affected by the artifact, it can be converted to approximately correct absorption and BC values. However, as the typical print formats of the MAAP do not give the reflected signal as an output, a semi-empirical correction method was developed based on laboratory experiments to correct for the results in the post-processing phase. The correction function was applied to three MAAP datasets from Gual Pahari (India), Beijing (China), and Welgegund (South Africa). In Beijing, the results could also be compared against a photoacoustic spectrometer (PAS). The correction improved the quality of all three MAAP datasets substantially, even though the individual instruments operated at different flow rates and in different environments

Deprivation of Liberty of Children

International children’s rights law is utterly clear. The use of deprivation of liberty of children must be limited to the absolute minimum. If it is nevertheless regarded necessary to arrest, detain, imprison, or institutionalize a child, states have the obligation to safeguard that her or his rights are recognized and adequately protected, regardless of the context in which the deprivation of liberty takes place. This chapter elaborates on the specifics of these two limbs of Article 37 CRC, the core human rights provision for the protection of children deprived of liberty. It analyzes the legal status these children are entitled to, specifies the corresponding negative and positive obligations for states, and explores avenues for an effective implementation.Effective Protection of Fundamental Rights in a pluralist worl

Structure and functional characterization of pyruvate decarboxylase from Gluconacetobacter diazotrophicus

BACKGROUND: Bacterial pyruvate decarboxylases (PDC) are rare. Their role in ethanol production and in bacterially mediated ethanologenic processes has, however, ensured a continued and growing interest. PDCs from Zymomonas mobilis (ZmPDC), Zymobacter palmae (ZpPDC) and Sarcina ventriculi (SvPDC) have been characterized and ZmPDC has been produced successfully in a range of heterologous hosts. PDCs from the Acetobacteraceae and their role in metabolism have not been characterized to the same extent. Examples include Gluconobacter oxydans (GoPDC), G. diazotrophicus (GdPDC) and Acetobacter pasteutrianus (ApPDC). All of these organisms are of commercial importance. RESULTS: This study reports the kinetic characterization and the crystal structure of a PDC from Gluconacetobacter diazotrophicus (GdPDC). Enzyme kinetic analysis indicates a high affinity for pyruvate (KM 0.06 mM at pH 5), high catalytic efficiencies, pHopt of 5.5 and Topt at 45 degrees C. The enzyme is not thermostable (T of 18 minutes at 60 degrees C) and the calculated number of bonds between monomers and dimers do not give clear indications for the relatively lower thermostability compared to other PDCs. The structure is highly similar to those described for Z. mobilis (ZmPDC) and A. pasteurianus PDC (ApPDC) with a rmsd value of 0.57 A for C? when comparing GdPDC to that of ApPDC. Indole-3-pyruvate does not serve as a substrate for the enzyme. Structural differences occur in two loci, involving the regions Thr341 to Thr352 and Asn499 to Asp503. CONCLUSIONS: This is the first study of the PDC from G. diazotrophicus (PAL5) and lays the groundwork for future research into its role in this endosymbiont. The crystal structure of GdPDC indicates the enzyme to be evolutionarily closely related to homologues from Z. mobilis and A. pasteurianus and suggests strong selective pressure to keep the enzyme characteristics in a narrow range. The pH optimum together with reduced thermostability likely reflect the host organisms niche and conditions under which these properties have been naturally selected for. The lack of activity on indole-3-pyruvate excludes this decarboxylase as the enzyme responsible for indole acetic acid production in G. diazotrophicus.IS

An overview of the first decade of PollyNET : an emerging network of automated Raman-polarization lidars for continuous aerosol profiling

© Author(s) 2016. This work is distributed under the Creative Commons Attribution 3.0 LicenseA global vertically resolved aerosol data set covering more than 10 years of observations at more than 20 measurement sites distributed from 63° N to 52° S and 72° W to 124° E has been achieved within the Raman and polarization lidar network PollyNET. This network consists of portable, remote-controlled multiwavelength-polarization-Raman lidars (Polly) for automated and continuous 24/7 observations of clouds and aerosols. PollyNET is an independent, voluntary, and scientific network. All Polly lidars feature a standardized instrument design with different capabilities ranging from single wavelength to multiwavelength systems, and now apply unified calibration, quality control, and data analysis. The observations are processed in near-real time without manual intervention, and are presented online at http://polly.tropos.de/. The paper gives an overview of the observations on four continents and two research vessels obtained with eight Polly systems. The specific aerosol types at these locations (mineral dust, smoke, dust-smoke and other dusty mixtures, urban haze, and volcanic ash) are identified by their Ångström exponent, lidar ratio, and depolarization ratio. The vertical aerosol distribution at the PollyNET locations is discussed on the basis of more than 55 000 automatically retrieved 30 min particle backscatter coefficient profiles at 532 nm as this operating wavelength is available for all Polly lidar systems. A seasonal analysis of measurements at selected sites revealed typical and extraordinary aerosol conditions as well as seasonal differences. These studies show the potential of PollyNET to support the establishment of a global aerosol climatology that covers the entire troposphere.Peer reviewe

A position statement and practical guide to the use of particulate filtering facepiece respirators (N95, FFP2, or equivalent) for South African health workers exposed to respiratory pathogens including Mycobacterium tuberculosis and SARS-CoV-2

Summary Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is transmitted mainly by aerosol in particles <10 µm that can remain suspended for hours before being inhaled. Because particulate filtering facepiece respirators (‘respirators’; e.g. N95 masks) are more effective than surgical masks against bio-aerosols, many international organisations now recommend that health workers (HWs) wear a respirator when caring for individuals who may have COVID-19. In South Africa (SA), however, surgical masks are still recommended for the routine care of individuals with possible or confirmed COVID-19, with respirators reserved for so-called aerosol-generating procedures. In contrast, SA guidelines do recommend respirators for routine care of individuals with possible or confirmed tuberculosis (TB), which is also transmitted via aerosol. In health facilities in SA, distinguishing between TB and COVID-19 is challenging without examination and investigation, both of which may expose HWs to potentially infectious individuals. Symptom-based triage has limited utility in defining risk. Indeed, significant proportions of individuals with COVID-19 and/or pulmonary TB may not have symptoms and/or test negative. The prevalence of undiagnosed respiratory disease is therefore likely significant in many general clinical areas (e.g. waiting areas). Moreover, a proportion of HWs are HIV-positive and are at increased risk of severe COVID-19 and death. Recommendations Sustained improvements in infection prevention and control (IPC) require reorganisation of systems to prioritise HW and patient safety. While this will take time, it is unacceptable to leave HWs exposed until such changes are made. We propose that the SA health system adopts a target of ‘zero harm’, aiming to eliminate transmission of respiratory pathogens to all individuals in every healthcare setting. Accordingly, we recommend: 1. the use of respirators by all staff (clinical and non-clinical) during activities that involve contact or sharing air in indoor spaces with individuals who: (i) have not yet been clinically evaluated; or (ii) are thought or known to have TB and/or COVID-19 or other potentially harmful respiratory infections; 2. the use of respirators that meet national and international manufacturing standards; 3. evaluation of all respirators, at the least, by qualitative fit testing; and 4. the use of respirators as part of a ‘package of care’ in line with international IPC recommendations. We recognise that this will be challenging, not least due to global and national shortages of personal protective equipment (PPE). SA national policy around respiratory protective equipment enables a robust framework for manufacture and quality control and has been supported by local manufacturers and the Department of Trade, Industry and Competition. Respirator manufacturers should explore adaptations to improve comfort and reduce barriers to communication. Structural changes are needed urgently to improve the safety of health facilities: persistent advocacy and research around potential systems change remain essential