19 research outputs found
Incorporation of anterior iliac crest or calvarial bone grafts in reconstructed atrophied maxillae:A randomized clinical trial with histomorphometric and micro-CT analyses
BACKGROUND: Autologous bone grafts have been applied successfully to severely atrophied maxilla via a preimplant procedure. Differences in graft incorporation at the microscopic level can be the decisive factor in the choice between anterior iliac crest and calvarial bone. PURPOSE: To compare conversion of anterior iliac crest bone and calvarial bone 4 months after grafting of the edentulous maxilla. MATERIALS AND METHODS: Twenty consecutive patients were randomly assigned to either anterior iliac crest (n = 10) or calvarial (n = 10) bone harvesting to reconstruct their atrophied maxillae. Biopsies were taken from both fresh bone grafts and reconstructed maxillae after 4 months healing, at time of implant placement. Micro-CT, histomorphometric and histological analyses were performed. RESULTS: Micro-CT analysis revealed that both the anterior iliac crest and calvarial bone grafts retained their volume and bone mass after being incorporated in the maxilla, but with a favor for calvarial bone grafts: calvarial bone grafts had a higher mineral density before and after incorporation. Both bone grafts types were well incorporated after 4 months of healing with preservation of bone volume and mineral density. Although the fresh bone biopsies were similar histomorphometrically, after 4 months of graft incorporation, the osteoid percentage and osteocyte count remained higher in the anterior iliac crest bone whereas the percentage of bone was higher in the calvarial bone grafts compared to the anterior iliac crest bone grafts. CONCLUSIONS: Both donor sites, that is, anterior iliac crest and calvarial bone, are well suited to provide a reliable and stable basis for implant placement 4 months after grafting with mineral density, porosity, and resorption rate in favor of calvarial bone grafts
Histomorphometric and micro-CT analyses of calvarial bone grafts used to reconstruct the extremely atrophied maxilla
Background Calvarial bone grafts are successful in the reconstruction of the severely atrophied maxilla as a pre-implant procedure. However, not much is known about graft incorporation at the microscopic level. Purpose This study aimed to assess calvarial bone conversion 4 months after being grafted in the edentulous maxillary bone. Materials and methods In 13 patients (age:65.3 +/- 8.7 years) the atrophic maxilla was reconstructed with autologous calvarial bone. Biopsies were taken from fresh calvarial bone grafts and from the reconstructed maxillae after 4 months of healing. Micro-CT, histomorphometric, and histological analysis were performed. From three patients biopsies were obtained after 9, 11, or 45 months. Results The micro-CT analysis revealed that in the maxilla the calvarial bone was well preserved even after 45 months. Histology showed progressive incorporation of grafted bone within a maxillary bone. Osteoid and osteocytes were present in all biopsies indicating new bone formation and vital bone. Histomorphometrically, the percentage of grafted bone volume over total volume decreased from 79.8% (IQR78.7-83.3) in fresh calvarial grafts to 59.3% (IQR44.8-64.6) in healed grafts. The biopsies were taken after 9, 11, and 45 months showed similar values. Conclusions Calvarial bone grafts result in stable and viable bone, good incorporation into native maxillary bone, and a minor decrease in bone volume after healing. Consequently, they provide a solid base for implant placement in severely atrophied edentulous maxillary bone
Effects of Decreased Loading on the Mandible
Background
Bone mass and mineralization are largely influenced by loading. The purpose of this study was to evaluate the reaction of the entire mandibular bone in response to decreased load during growth. It is hypothesized that decreased muscular loading will lead to bone changes as seen during disuse, i.e. loss of bone mass.
Methods and Findings
Ten 21-day-old Wistar strain male rats were divided into two groups (each n=5) and fed on either a hard- or soft-diet for 11 weeks. Micro-computed tomography was used for the investigation of bone mineralization, bone volume, bone volume fraction (BV/TV) and morphological analysis. Mandibular mineralization patterns were very consistent, showing a lower degree of mineralization in the ramus than in the corpus. In the soft-diet group, mineralization below the molars was significantly increased (p<0.05) compared to the hard diet group. Also, bone volume and BV/TV of the condyle and the masseter attachment were decreased in the soft-diet group (p<0.05). Morphological analysis showed inhibited growth of the ramus in the soft-diet group (p<0.05).
Conclusion
Decreased loading by a soft diet causes significant changes in the mandible. However, these changes are very region-specific, probably depending on the alterations in the local loading regime. The results suggest that muscle activity during growth is very important for bone quality and morphology
The Influence of Mineralization on Intratrabecular Stress and Strain Distribution in Developing Trabecular Bone
The load-transfer pathway in trabecular bone is largely determined by its architecture. However, the influence of variations
in mineralization is not known. The goal of this study was to examine the influence of inhomogeneously distributed degrees
of mineralization (DMB) on intratrabecular stresses and strains. Cubic mandibular condylar bone specimens from fetal and newborn
pigs were used. Finite element models were constructed, in which the element tissue moduli were scaled to the local DMB. Disregarding
the observed distribution of mineralization was associated with an overestimation of average equivalent strain and underestimation
of von Mises equivalent stress. From the surface of trabecular elements towards their core the strain decreased irrespective
of tissue stiffness distribution. This indicates that the trabecular elements were bent during the compression experiment.
Inhomogeneously distributed tissue stiffness resulted in a low stress at the surface that increased towards the core. In contrast,
disregarding this tissue stiffness distribution resulted in high stress at the surface which decreased towards the core. It
was concluded that the increased DMB, together with concurring alterations in architecture, during development leads to a
structure which is able to resist increasing loads without an increase in average deformation, which may lead to damage
Biomechanical consequences of developmental changes in trabecular architecture and mineralization of the pig mandibular condyle
Abstract The purpose of the present study was to examine the changes in apparent mechanical properties of trabecular bone in the mandibular condyle during fetal development and to investigate the contributions of altering architecture, and degree and distribution of mineralization to this change. Three-dimensional, high-resolution micro-computed tomography (microCT) reconstructions were utilized to assess the altering architecture and mineralization during development. From the reconstructions, inhomogeneous finite element models were constructed, in which the tissue moduli were scaled to the local degree of mineralization of bone (DMB). In addition, homogeneous models were devised to study the separate influence of architectural and DMB changes on apparent mechanical properties. It was found that the bone structure became stiffer with age. Both the mechanical and structural anisotropies pointed to a rod-like structure that was predominantly oriented from anteroinferior to posterosuperior. Resistance against shear, also increasing with age, was highest in the sagittal plane. The reorganization of trabecular elements, which occurred without a change in bone volume fraction, contributed to the increase in apparent stiffness. The increase in DMB, however, contributed more dominantly. Incorporating the observed inhomogeneous distribution of mineralization decreased the apparent stiffness, but increased the mechanical anisotropy. This denotes that there might be a directional dependency of the DMB of trabecular elements, i.e. differently orientated trabecular elements might have different DMBs. In conclusion, the changes in DMB and its distribution are important to consider when studying mechanical properties during development and should be considered in other situations where differences in DMB are expected.
Histological and micro Computed Tomography analysis of a femoral stress fracture associated with prolonged bisphosphonate use
The origin of atypical femoral fractures (AFF) associated with bisphosphonate therapy remains to be elucidated. In this study, a biopsy of an AFF site is analyzed to determine whether microdamage and/or morphological changes are present in the area of the AFF. Cortical bone from an AFF region was obtained during a preventive stabilization in a patient with a symptomatic AFF. This bone was scanned using microCT (resolution=0.01 mm), stained with basic fuchsin and analyzed histologically. The diameter of the Haversian canals was higher in the vicinity of the AFF compared to the bone further away from the AFF. The bone mineral density within the cortex ranged from 1020 to 1080 mg HA/cm(3). We observed penetration of basic fuchsin into the matrix, which is a tell-tale sign of diffuse damage. The higher diameter of haversian canals is likely to result in higher local stresses and consequently increased microdamage. The diffuse microdamage in the biopsy may furthermore be directly related to bisphosphonate use, preventing repair of microdamage, and consequently the development of the AFF. Increased porosity of the cortex and accumulation of microdamage might have lead to a stress fracture and ultimately a complete AF
Effects of decreased occlusal loading during growth on the mandibular bone characteristics
Regional differences in microarchitecture and mineralization of the atrophic edentulous mandible: A microcomputed tomography study
Objective: The aim of the present study was to assess mineralization and trabecular microarchitecture in atrophic edentulous mandibles and to identify regional differences and relations with the extent of resorption. Methods: Cortical and trabecular bone volumes in anterior, premolar and molar regions of 10 edentulous cadaveric mandibles (5 males and 5 females; mean age ± SD: 85.4 ± 8.3 years) were assessed by microcomputed tomography. Mandibular height and Cawood & Howell classes were recorded. Concerning trabecular volumes, bone mineral density (BMD), bone volume fraction, trabecular tissue volume fraction, connectivity density, trabecular number, trabecular thickness, trabecular separation, degree of anisotropy, and structural model index were measured; concerning cortical volumes porosity, BMD and cortical thickness were measured. Results: In molar regions, the bone volume fraction and trabecular number were lower, whereas trabecular separation, degree of anisotropy and cortical BMD were higher compared to anterior regions. In premolar regions, mandibular height correlated negatively with trabecular number (Spearman's correlation r = 0.73, p = 0.017) and connectivity density (Spearman's correlation r = 0.82, p = 0.004), and correlated positively with trabecular separation (Spearman's correlation r = − 0.65, p = 0.04). Cortical BMD was higher at bucco-inferior cortex of molar and inferior border of premolar region and lower at anterior cranial buccal and lingual surface. Conclusions: In the premolar region, increased resorption coincides with local impairment of trabecular bone quality. Cortical bone BMD is higher in areas with highest strains and lower in areas with most mandibular resorption. Trabecular bone volume and quality is superior in the anterior region of the edentulous mandible, which might explain improved primary stability of dental implants in this region
Graphs depicting the bone volume.
<p>(A) Condyle, (B) Attachment of the masseter, (C) The part below the second tooth. **Significant difference between both groups (p<0.05).</p
Osteochondral defects of the talus: a novel animal model in the goat
Osteochondral defects of the talus pose a difficult therapeutic challenge. An experimental animal model of the ankle joint is not available. The aim of this study was to test a newly developed animal model for osteochondral defects of the ankle in vivo. Osteochondral defects were created in the talus of goat hind legs using a posterolateral surgical approach. The defects were filled with either autologous cancellous bone or donor demineralized bone matrix or left empty as control. After 12 weeks of healing, the specimens were analyzed with radiography, macroscopy, microcomputed tomography, histology, histomorphometry, and fluorescence microscopy. It was possible to create a standardized defect in each talus. The implanted material remained in place. The analyses showed that most bony tissue was generated in the defects filled with autologous bone and least in the control defects. Our findings show that a standard osteochondral defect can be created in the talus by a relatively simple procedure in a large animal that allows qualitative and quantitative evaluation. The model can be used in future experiments to investigate alternative treatment methods before they are introduced into clinical practic