Anionic-cationic surfactant mixture providing the electrically controlled homeotropic surface anchoring of liquid crystals

В статье рассмотрена смесь анионно-катионного поверхностно-активного вещества, обеспечивающая электрически контролируемое гомеотропное поверхностное закрепление жидких кристаллов

Hinton, Deane R.

The chiral optical Tamm state (COTS) is a special localized state at the interface of a handedness-preserving mirror and a structurally chiral medium such as a cholesteric liquid crystal or a chiral sculptured thin film. The spectral behavior of COTS, observed as reflection resonances, is described by the temporal coupled-mode theory. Mode coupling is different for two circular light polarizations because COTS has a helix structure replicating that of the cholesteric. The mode coupling for co-handed circularly polarized light exponentially attenuates with the cholesteric layer thickness since the COTS frequency falls into the stop band. Cross-handed circularly polarized light freely goes through the cholesteric layer and can excite COTS when reflected from the handedness-preserving mirror. The coupling in this case is proportional to anisotropy of the cholesteric and theoretically it is only anisotropy of magnetic permittivity that can ultimately cancel this coupling. These two couplings being equal results in a polarization crossover (the Kopp--Genack effect) for which a linear polarization is optimal to excite COTS. The corresponding cholesteric thickness and scattering matrix for COTS are generally described by simple expressions

Hybrid anchoring for a color-reflective dual-frequency cholesteric liquid crystal device switched by low voltages

Cholesteric liquid crystal (CLC) materials used in electro-optical (EO) devices are characterized by high operating voltage and slow response speed, which hinders their further development in display applications. Dual-frequency CLCs (DFCLCs) can solve the problem of slow bistable transition, but the operating voltage is still high, especially in color-reflective DFCLC cells. Here we report a simple approach to lowering the switching voltage as well as to shortening the response time. This technique adopts hybrid surface treatment to modulate the structural arrangement of CLC molecules. Both planar- and vertical-alignment layers are employed and coated on one and the other substrates separately to improve the electro-optical properties of DFCLCs. We show that the threshold voltage for switching can be decreased to as low as 5 V and the shortest response time is measured to be 0.8 ms, which renders CLC EO devices including displays more practical for commercial purpose

Electro-thermally tunable reflective colors in a self-organized cholesteric helical superstructure

We propose to dynamically control the reflective color of a cholesteric liquid crystal (CLC) by electrically tuning the center wavelength (c) of the bandgap. The CLC, sandwiched in a planar-aligned cell with indium–tin-oxide electrodes, possesses negative dielectric anisotropy and thermo-responsive spectral properties. The helix in the Grandjean planar state, which is subject to vertically applied voltage, should be undisturbed in that the long molecular axis is initially perpendicular to the direction of the electric field. Surprisingly, when the frequency of the applied voltage is higher than a critical value, c of the CLC cell varies as a function of the voltage. The underlying mechanism is the voltage-induced temperature change through dielectric heating in the frequency regime of pseudo-dielectric relaxation, attributable to the significant equivalent resistance–capacitance circuit of the cell due to the use of electrode layers with finite conductance. The driving voltage enabling the tuning of c in the entire visible spectrum is as low as 12  Vrms in a 5 μm thick cell at a frequency of 2 MHz. The proposed CLC cell, exhibiting a broad electrically tunable spectral range from the near-infrared to ultraviolet, holds great promise for developing tunable photonic devices such as multicolor reflectors, filters, and sensors

Hybrid anchoring for a color-reflective dual-frequency cholesteric liquid crystal device switched by low voltages

Cholesteric liquid crystal (CLC) materials used in electro-optical (EO) devices are characterized by high operating voltage and slow response speed, which hinders their further development in display applications. Dual-frequency CLCs (DFCLCs) can solve the problem of slow bistable transition, but the operating voltage is still high, especially in color-reflective DFCLC cells. Here we report a simple approach to lowering the switching voltage as well as to shortening the response time. This technique adopts hybrid surface treatment to modulate the structural arrangement of CLC molecules. Both planar- and vertical-alignment layers are employed and coated on one and the other substrates separately to improve the electro-optical properties of DFCLCs. We show that the threshold voltage for switching can be decreased to as low as 5 V and the shortest response time is measured to be 0.8 ms, which renders CLC EO devices including displays more practical for commercial purpose

Nematic Structures under Conical Anchoring at Various Director Tilt Angles Specified by Polymethacrylate Compositions

Dependence of the director tilt angle of nematic liquid crystal (LC) under conical anchoring from the two-component polymer mixture composition has been studied. We varied the ratio of poly(isobutyl methacrylate) (PiBMA), which specifies a conical anchoring for the nematic liquid crystal LN-396, and poly(methylmethacrylate) (PMMA) assigning a tangential alignment for the same nematic. An oblique incidence light technique to determine a tilt angle has been used. It has been shown that the tilt angle increases from 0∘ to 47.7∘ when PiBMA:PMMA ratio changes in the range 30:70 to 100:0. The specific optical textures viewed under the polarizing microscope and proper orientational structures have been considered for various compositions of the polymer films. An electric field action on the formed orientational structures has been investigated. The obtained results are promising for the application in various electro-optical LC devices with a conical anchoring in which the director tilt angle is a crucial parameter: a controlled diffraction gratings, an electrically operated achromatic rotators of linear light polarization, etc

Electrically induced anchoring transition in cholesteric liquid crystal cells with different confinement ratios

Reorientation of cholesteric liquid crystal induced by the electrically controlled ionic modification of surface anchoring within the cell with confinement ratio exceeding 1 has been studied. The change of homeotropic surface anchoring to the planar one on the electrode-anode substrate under the action of DC voltage causes the formation of the modulated hybrid-aligned cholesteric layer in the cell. Optical texture of the liquid crystal layer with such an orientation structure is the linear periodic stripes. Homogeneity of emerging optical texture depending on the confinement ratio as well as on the prehistory of voltage application has been considered. It has been found that the ionic modification of surface anchoring results in total transformation of the diffraction pattern observed after the laser beam passing through the sample