Diquaternary Ammonium Compounds in Zeolite Synthesis: Cyclic and Polycyclic N-Heterocycles Connected by Methylene Chains

An additional dimension has been added to our long-standing studies in high silica zeolite synthesis via a guest/host synergism. We have created and studied the impact of making symmetric diquaternary ammonium compounds, by varying the chain length between nitrogen charge centers, and the heterocycle size and geometry containing the nitrogen. This allows the introduction of a second spatial parameter in the use of the charged organo-cation guest in the zeolite synthesis. The series of 15 diquaternary ammonium compounds (5 heterocycles synthesized onto chain lengths of C4−C6) were tested in a total of 135 zeolite syntheses reactions. Nine screening reactions were employed for each guest molecule, and the conditions built upon past successes in finding novel high silica zeolites via introduction of boron, aluminum, or germanium as substituting tetrahedral framework atoms for silicon. Eighteen different zeolite structures emerged from the studies. The use of specific chain lengths for derivatives of the pyrrolidine ring system produced novel zeolite materials SSZ-74 and 75

A Most Unusual Zeolite Templating: Cage to Cage Connection of One Guest Molecule

An unusual case of a diquaternary ammonium dication, with large bulky end groups built from the tropane moiety and connected by a C4 methylene chain, is found to reside in zeolite SSZ-35 (STF). The structure of the guest/host product is such that the tropane bicylic entities reside in the shallow cavities of the cages of the STF structure and the C4 methylene chain runs through the 10-ring (~5.5 Å) window that connects the cages. This is a most unusual (and energy-intensive) templating of a zeolite structure with the guest molecule spanning two unit cells. The unusual result was found by single crystal studies with the addition of the use of the SQUEEZE program to show a consistent fit for the guest molecule following from measured electron densities in the crystal structure work. These analyses were followed with MAS NMR studies to confirm the integrity of the diquaternary guest molecule in the host sieve. A few comparative diquaternary guest molecules in MFI zeolite are also studied

Safe Zones Task Force Final Report

The task force was established as a result of a Faculty Senate resolution. Chancellor Loren Crabtree charged the Task Force to advise him on the planning, implementation and evaluation of a “Safe Zone” project on the Knoxville campus. After several meetings, extensive research and reviewing various manuals the Safe Zone Task Force presents the attached recommendation for the establishment of a Safe Zone plan at the University of Tennessee

Nonaqueous Fluoride/Chloride Anion-Promoted Delamination of Layered Zeolite Precursors: Synthesis and Characterization of UCB-2

The delamination of layered zeolite precursor PREFER is demonstrated under mild nonaqueous conditions using a mixture of cetyltrimethylammonium bromide, tetrabutylammonium fluoride, and tetrabutylammonium chloride in N,N-dimethylformamide (DMF) as solvent. The delamination proceeds through a swollen material intermediate which is characterized using powder X-ray diffraction (PXRD). Subsequent addition of concentrated HCl at room temperature leads to synthesis of UCB-2 via delamination of the swollen PREFER material and is characterized using PXRD, transmission electron microscopy (TEM), and argon gas physisorption, which shows lack of microporosity in UCB-2. ^(29)Si magic angle spinning (MAS) NMR spectroscopy indicates lack of amorphization during delamination, as indicated by the entire absence of Q^2 resonances, and ^(27)Al MAS NMR spectroscopy shows exclusively tetrahedral aluminum in the framework following delamination. The delamination process requires both chloride and fluoride anions and is sensitive to solvent, working well in DMF. Experiments aimed at synthesizing UCB-2 using aqueous conditions previously used for UCB-1 synthesis leads to partial swelling and lack of delamination upon acidification. A similar lack of delamination is observed upon attempting synthesis of UCB-1 under conditions used for UCB-2 synthesis. The delamination of PREFER is reversible between delaminated and swollen states in the following manner. Treatment of as-made UCB-2 with the same reagents as used here for the swelling of PREFER causes the delaminated UCB-2 material to revert back to swollen PREFER. This causes the delaminated UCB-2 material to revert back to swollen PREFER. Altogether, these results highlight delamination as the reverse of zeolite synthesis and demonstrate the crucial role of noncovalent self-assembly involving the zeolitic framework and cations/anions/structure-directing agent and solvent during the delamination process

Delamination of Layered Zeolite Precursors under Mild Conditions: Synthesis of UCB-1 via Fluoride/Chloride Anion-Promoted Exfoliation

New material UCB-1 is synthesized via the delamination of zeolite precursor MCM-22 (P) at pH 9 using an aqueous solution of cetyltrimethylammonium bromide, tetrabutylammonium fluoride, and tetrabutylammonium chloride at 353 K. Characterization by powder X-ray diffraction, transmission electron microscopy, and nitrogen physisorption at 77 K indicates the same degree of delamination in UCB-1 as previously reported for delaminated zeolite precursors, which require a pH of greater than 13.5 and sonication in order to achieve exfoliation. UCB-1 consists of a high degree of structural integrity via ^(29)Si MAS NMR and Fourier transform infrared spectroscopies, and no detectable formation of amorphous silica phase via transmission electron microscopy. Porosimetry measurements demonstrate a lack of hysteresis in the N_2 adsorption/desorption isotherms and macroporosity in UCB-1. The new method is generalizable to a variety of Si:Al ratios and leads to delaminated zeolite precursor materials lacking amorphization

Physicochemical Properties and Catalytic Behavior of the Molecular Sieve SSZ-70

SSZ-70 is synthesized using 1,3-bis(isobutyl)imidazolium, 1,3-bis(cyclohexyl)imidazolium, and 1,3-bis(cycloheptyl)imidazolium structure directing agents (SDAs), and the solids obtained are characterized by powder X-ray diffraction (XRD), ^(29)Si magic angle spinning nuclear magnetic resonance (MAS NMR), electron microscopy, nitrogen and hydrocarbon adsorption, and thermogravimetric analyses. The physicochemical properties of SSZ-70 show that it is a new molecular sieve that has similarities to MWW-type materials. The catalytic behavior of SSZ-70 is evaluated through the use of the constraint index (CI) test. Distinct differences in the reactivity between Al-SSZ-70 and SSZ-25 (MWW) are observed and are the consequences of the structural differences between these two molecular sieves

Triptycene Structure-Directing Agents in Aluminophosphate Synthesis

The synthesis of aluminophosphates is investigated using a number of triptycene-based organic structure-directing agents (OSDA). These OSDAs are designed to synthesize extra-large pore and/or large cavity-containing molecular sieves. Starting from the hydrophobic triptycene molecule, OSDAs are prepared by introducing three amine-based centers that can be charged either by protonation in the acidic aluminophosphate reaction media or through quaternization. VPI-5 is synthesized using these tripytycene OSDAs, and the OSDAs are occluded inside the pores. This synthesis marks the first time VPI-5 has been made as a single phase with an OSDA occluded inside the framework of the as-made material that is not removed by simple washing with water or other solvents. Additionally, several other aluminophosphates with unknown structures are synthesized using these new OSDAs

Transformation of Extra-Large Pore Germanosilicate CIT-13 Molecular Sieve into Extra-Large Pore CIT-5 Molecular Sieve

The 14- and 10-membered ring germanosilicate Ge-CIT-13 (*CTH) is transformed into the 14-membered ring germanosilicate Ge-CIT-5 (CFI). The transformation can occur at room temperature but requires the presence of adsorbed water. The *CTH-to-CFI transformation involves rearrangement of germanium-rich double-4-ring units in *CTH to form double-zigzag chains in CFI. The rate of transformation is dependent on the germanium content of the starting Ge-CIT-13 and the humidity of the transforming atmosphere. Other germanosilicates—UTL, IWW, and ITH—do not show this type of transformation because of arrangements of Ge-sites within their d4r units and/or to spatial restrictions regarding the d4r unit arrangement within their interlayer regions. Ge-CIT-5 can be further transformed into 10-membered-ring CIT-15 using ammonium hydroxide solution as the delaminating agent. Postsynthetic alumination of Ge-CIT-5 yielded high-silica CFI-type aluminogermanosilicates having molar Si/Al ratios in the range of 14–230, primarily depending on the acidity of the solution phase

Cage-defining Ring: A Molecular Sieve Structural Indicator for Light Olefin Product Distribution from the Methanol-to-Olefins Reaction

The methanol-to-olefins (MTO) process produces high-value-added light olefins from nonpetroleum sources. Acidic zeotypes containing cages bounded by 8-ring (small-pore) windows can effectively catalyze the MTO reaction, since their cages can accommodate the necessary aromatic intermediates that produce the light olefin products that escape. While progress on the mechanisms of the MTO reaction continues, zeotype structure–reaction property relationships have yet to be elucidated. Here, we report MTO reaction results from various small-pore, cage-containing silicoaluminophosphate/metalloaluminophosphates (SAPO/MAPOs) and zeolites under the same reaction conditions. The MTO behaviors of microporous materials having the following topologies are investigated: LEV, ERI, CHA, AFX, SFW, AEI, DDR, RTH, ITE, SAV, LTA, RHO, KFI, and UFI. The previous observation that light olefin product distributions from a series of small-pore, cage-containing zeolites can be classified into four structural categories is further supported by the results shown here from zeolite structures not investigated in the previous study and SAPO and MAPO materials with isostructural frameworks to all the zeolites. Additionally, these data reveal that light olefin product distributions are very similar over a given topology independent of framework composition. To develop a structure–property relationship between the framework topology and the MTO light olefin product distribution, the concept of the cage-defining ring size is introduced. The cage-defining ring size is defined as the minimum number of tetrahedral atoms of the ring encircling the center of the framework cages in the molecular sieve topology. It is shown that the cage-defining ring size correlates with MTO light olefin product distribution