Wear and damage transitions of wheel and rail materials under various contact conditions

This study discusses a Tγ/A method of plotting wear data from a twin-disc machine for identifying the wear and damage transitions of wheel and rail materials. As found in previous work, three wear regimes (mild wear, severe wear and catastrophic wear) of U71Mn rail material were identified in dry rolling-sliding contact tests. It was determined that the damage mechanism transforms in the different wear regimes. Here earlier studies were extended to establish wear behavior for the presence of a number of third body materials (oil, water, friction enhancers) and a rail cladding process designed to make wheels and rails more durable. This has provided much needed data for Multi-Body Dynamics (MBD) simulations, and will allow better predictions of profile evolution of wheel and rail over a wider range of conditions

Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

Fabrication of CuO nanoparticle interlinked microsphere cages by solution method

Here we report a very simple method to convert conventional CuO powders to nanoparticle interlinked microsphere cages by solution method. CuO is dissolved into aqueous ammonia, and the solution is diluted by alcohol and dip coating onto a glass substrate. Drying at 80 °C, the nanostructures with bunchy nanoparticles of Cu(OH)2can be formed. After the substrate immerges into the solution and we vaporize the solution, hollow microspheres can be formed onto the substrate. There are three phases in the as-prepared samples, monoclinic tenorite CuO, orthorhombic Cu(OH)2, and monoclinic carbonatodiamminecopper(II) (Cu(NH3)2CO3). After annealing at 150 °C, the products convert to CuO completely. At annealing temperature above 350 °C, the hollow microspheres became nanoparticle interlinked cages

The ARGO-YBJ Experiment Progresses and Future Extension

Gamma ray source detection above 30TeV is an encouraging approach for finding galactic cosmic ray origins. All sky survey for gamma ray sources using wide field of view detector is essential for population accumulation for various types of sources above 100GeV. To target the goals, the ARGO-YBJ experiment has been established. Significant progresses have been made in the experiment. A large air shower detector array in an area of 1km2 is proposed to boost the sensitivity. Hybrid detection with multi-techniques will allow a good discrimination between different types of primary particles, including photons and protons, thus enable an energy spectrum measurement for individual specie. Fluorescence light detector array will extend the spectrum measurement above 100PeV where the second knee is located. An energy scale determined by balloon experiments at 10TeV will be propagated to ultra high energy cosmic ray experiments

High Altitude test of RPCs for the ARGO-YBJ experiment

A 50 m**2 RPC carpet was operated at the YangBaJing Cosmic Ray Laboratory (Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive Air Showers was studied. Efficiency and time resolution measurements at the pressure and temperature conditions typical of high mountain laboratories, are reported.Comment: 16 pages, 10 figures, submitted to Nucl. Instr. Met

Search for the Lepton Flavor Violation Processes J/ψ→J/\psi \to μτ\mu\tau and eτe\tau

The lepton flavor violation processes $J/\psi \to \mu\tau$ and $e\tau$ are searched for using a sample of 5.8$\times 10^7$ $J/\psi$ events collected with the BESII detector. Zero and one candidate events, consistent with the estimated background, are observed in $J/\psi \to \mu\tau, \tau\to e\bar\nu_e\nu_{\tau}$ and $J/\psi\to e\tau, \tau\to\mu\bar\nu_{\mu}\nu_{\tau}$ decays, respectively. Upper limits on the branching ratios are determined to be $Br(J/\psi\to\mu\tau)<2.0 \times 10^{-6}$ and $Br(J/\psi \to e\tau) < 8.3 \times10^{-6}$ at the 90% confidence level (C.L.).Comment: 9 pages, 2 figure

The σ\sigma pole in J/ψ→ωπ+π−J/\psi \to \omega \pi^+ \pi^-

Using a sample of 58 million $J/\psi$ events recorded in the BESII detector, the decay $J/\psi \to \omega \pi^+ \pi^-$ is studied. There are conspicuous $\omega f_2(1270)$ and $b_1(1235)\pi$ signals. At low $\pi \pi$ mass, a large broad peak due to the $\sigma$ is observed, and its pole position is determined to be $(541 \pm 39)$ - $i$ $(252 \pm 42)$ MeV from the mean of six analyses. The errors are dominated by the systematic errors.Comment: 15 pages, 6 figures, submitted to PL

Observation of the decay \psip\rar\kstark

Using 14 million $\psi(2S)$ events collected with the BESII detector, branching fractions of \psip\rar\kstarkpm and \kstarknn are determined to be: \calB(\psip\rar\kstarkpm)=(2.9^{+1.3}_{-1.7}\pm0.4)\times 10^{-5} and \calB(\psip\rar\kstarknn)=(13.3^{+2.4}_{-2.7}\pm1.9)\times 10^{-5}. The results confirm the violation of the "12%" rule for these two decay channels with higher precision. A large isospin violation between the charged and neutral modes is observed.Comment: 5 pages, 3 figure

Improved protocols of secure quantum communication using W states

Recently, Hwang et al. [Eur. Phys. J. D. 61, 785 (2011)] and Yuan et al. [Int. J. Theo. Phys. 50, 2403 (2011)] have proposed two efficient protocols of secure quantum communication using 3-qubit and 4-qubit symmetric W state respectively. These two dense coding based protocols are generalized and their efficiencies are considerably improved. Simple bounds on the qubit efficiency of deterministic secure quantum communication (DSQC) and quantum secure direct communication (QSDC) protocols are obtained and it is shown that dense coding is not essential for designing of maximally efficient DSQC and QSDC protocols. This fact is used to design maximally efficient protocols of DSQC and QSDC using 3-qubit and 4-qubit W states.Comment: 8 page

Single Spin Asymmetry ANA_N in Polarized Proton-Proton Elastic Scattering at s=200\sqrt{s}=200 GeV

We report a high precision measurement of the transverse single spin asymmetry $A_N$ at the center of mass energy $\sqrt{s}=200$ GeV in elastic proton-proton scattering by the STAR experiment at RHIC. The $A_N$ was measured in the four-momentum transfer squared $t$ range $0.003 \leqslant |t| \leqslant 0.035$ \GeVcSq, the region of a significant interference between the electromagnetic and hadronic scattering amplitudes. The measured values of $A_N$ and its $t$-dependence are consistent with a vanishing hadronic spin-flip amplitude, thus providing strong constraints on the ratio of the single spin-flip to the non-flip amplitudes. Since the hadronic amplitude is dominated by the Pomeron amplitude at this $\sqrt{s}$, we conclude that this measurement addresses the question about the presence of a hadronic spin flip due to the Pomeron exchange in polarized proton-proton elastic scattering.Comment: 12 pages, 6 figure