Avalanche breakdown characteristics of Al1-xGaxAs0.56Sb0.44 quaternary alloys

Avalanche breakdown characteristics are essential for designing avalanche photodiodes. In this work, we investigated the effects of adding Ga to Al1-xGaxAs0.56Sb0.44 quaternary alloys. Using p-i-n diodes with a 100 nm i –region and alloy composition ranging from x = 0 to 0.15, we found that the bandgap energy of Al1-xGaxAs0.56Sb0.44 reduces from 1.64 to 1.56 eV. The corresponding avalanche breakdown voltage decreases from 13.02 to 12.05 V, giving a reduction of 64.7 mV for every percent addition of Ga. The surface leakage current was also found to be significantly lower in the diodes with x = 0.10 and 0.15 suggesting that Ga can be added to reduce the surface leakage current while still preserving the lattice match to InP substrate

Investigation of temperature and temporal stability of AlGaAsSb avalanche photodiodes

Since avalanche gain and breakdown voltage in most semiconductor materials change with temperature, instruments utilizing Avalanche Photodiodes (APDs) for their avalanche gains need to incorporate either temperature stabilization or voltage adjustment in the APD operation circuits. In this work we evaluated the temperature and temporal stability of avalanche gain in Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , a wide bandgap semiconductor lattice-matched to InP substrates. We investigated the temperature and temporal stability of the gain and breakdown voltage at temperatures of 24 °C (room temperature) to 80 °C. The breakdown voltage varies linearly with temperature with a temperature coefficient of 1.60 mV/K. The avalanche gain reduces from 10 to 8.5, a reduction of 15%, when the temperature increases from 24 to 80°C. The temporal stability of gain was recorded when the APD was biased to achieve an avalanche gain of 10. Fluctuations are within ± 0.7% at 24°C, increasing to ± 1.33% at 80°C. The temperature and temporal stability of avalanche gain indicates the potential of using Al 0.85 Ga 0.15 As 0.56 Sb 0.44 APDs grown on InP substrates to achieve high tolerance to temperature fluctuation

InAs Photodiodes for 3.43 mu(text)m Radiation Thermometry

We report an evaluation of an epitaxially grown uncooled InAs photodiode for the use in radiation thermometry. Radiation thermometry measurements was taken using the photodiode covered blackbody temperatures of 50 °C-300 °C. By determining the photocurrent and signal-to-noise ratio, the temperature error of the measurements was deduced. It was found that an uncooled InAs photodiode, with the peak and cutoff wavelengths of 3.35 and 3.55 μm, respectively, measured a temperature of 50 °C, with an error of 0.17 °C. Many plastics have C -H molecular bond absorptions at 3.43 μm and hence radiate thermally at this wavelength. Our results suggest that InAs photodiodes are well suited to measure the temperature of plastics above 50 °C. When tested with a narrow bandpass filter at 3.43 μm and blackbody temperatures from 50 °C-300 °C, the InAs photodiode was also found to produce a higher output photocurrent, compared with a commercial PbSe detectors

Avalanche Breakdown Timing Statistics for Silicon Single Photon Avalanche Diodes

CCBY Silicon-based Single Photon Avalanche Diodes (SPADs) are widely used as single photon detectors of visible and near infrared photons. There has however been a lack of models accurately interpreting the physics of impact ionization (the mechanism behind avalanche breakdown) for these devices. In this work, we present a statistical simulation model for silicon SPADs that is capable of predicting breakdown probability, mean time to breakdown and timing jitter. Our model inherently incorporates carriers & #x0027; dead space due to phonon scattering and allows for non-uniform electric fields. Model validation included avalanche gain, excess noise factor, breakdown voltage, breakdown probability, and timing statistics. Simulating an n on-p and a p-on-n SPAD design using our model, we found that the n-on-p design offers significantly improved mean time to breakdown and timing jitter characteristics. For a breakdown probability of 0.5, mean time to breakdown and timing jitter from the n-on-p design were 3 and 4 times smaller compared to those from the p on n design. The data reported in this paper is available from the ORDA digital repository (DOI: 10.15131/shef.data.4823248)

N-qubit entanglement via the Jy2J_y^2-type collective interaction

We investigate quantum correlations of the $N$-qubit states via a collective pseudo-spin interaction ($\propto J_y^2$) on arbitrary pure separable states for a given interval of time. Based on this dynamical generation of the $N$-qubit maximal entangled states, a quantum secret sharing protocol with $N$ continuous classical secrets is developed.Comment: 12 pages, 3 figure

Effects of carrier injection profile on low noise thin Al0.85Ga0.15As0.56Sb0.44 avalanche photodiodes

Avalanche photodiodes (APDs) with thin avalanche regions have shown low excess noise characteristics and high gain-bandwidth products, so they are suited for long-haul optical communications. In this work, we investigated how carrier injection profile affects the avalanche gain and excess noise factors of Al0.85Ga0.15As0.56Sb0.44 (lattice-matched to InP substrates) p-i-n and n-i-p diodes with total depletion widths of 145-240 nm. Different carrier injection profiles were achieved by using light with wavelengths of 420, 543 and 633nm. For p-i-n diodes, shorter wavelength light produces higher avalanche gains for a given reverse bias and lower excess noise factors at a given gain, compared to longer wavelength light. Thus, using 420 nm light on the p-i-n diodes, corresponding to pure electron injection conditions, gave the highest gain and lowest excess noise. In n-i-p diodes, pure hole injection yields significantly lower gain and higher excess noise, compared to mixed carrier injection. These show that the electron ionization coefficient, α, is higher than the hole ionization coefficient, β. Using pure electron injection, excess noise factor characteristics with effective ionization ratios, keff, of 0.08-0.1 were obtained. This is significantly lower than those of InP and In0.52Al0.48As, the commonly used avalanche materials combined with In0.53Ga0.47As absorber. The data reported in this paper is available from the ORDA digital repository (DOI: 10.15131/shef. DATA: 5787318)

Thin Al 1− Ga As 0.56 Sb 0.44 diodes with extremely weak temperature dependence of avalanche breakdown

When using avalanche photodiodes (APDs) in applications, temperature dependence of avalanche breakdown voltage is one of the performance parameters to be considered. Hence, novel materials developed for APDs require dedicated experimental studies. We have carried out such a study on thin Al1–xGaxAs0.56Sb0.44 p–i–n diode wafers (Ga composition from 0 to 0.15), plus measurements of avalanche gain and dark current. Based on data obtained from 77 to 297 K, the alloys Al1−xGaxAs0.56Sb0.44 exhibited weak temperature dependence of avalanche gain and breakdown voltage, with temperature coefficient approximately 0.86–1.08 mV K−1, among the lowest values reported for a number of semiconductor materials. Considering no significant tunnelling current was observed at room temperature at typical operating conditions, the alloys Al1−xGaxAs0.56Sb0.44 (Ga from 0 to 0.15) are suitable for InP substrates-based APDs that require excellent temperature stability without high tunnelling current

Evaluation of golden needle mushroom (Flammulina velutipes) stem waste on pullet performance and immune response

The driving force behind the interest in using natural herbs in poultry production is to eliminate the use of low-dose antibiotics. Therefore, this study was carried out to investigate the effect of Flammulina velutipes mushroom waste (FVW) on performance parameters, relative organ weight, apparent nutrient retention, excreta composition, immune response and serum immunity in pullets. A total of 360 x 10-week-old ISA Brown pullets were randomly assigned to five equal treatment groups, with nine replications of eight birds for each treatment. The dietary treatments included a standard basal diet as control; antibiotic (0.05% flavomycin); 2% FVW; 4% FVW; and 6% FVW. The total experimental duration was 42 days, from 10 weeks to 16 weeks old. Final live weight was higher in FVW groups than in the control and antibiotic groups. No differences were found for average daily feed intake, average daily weight gain and feed conversion ratio during the entire study period. Proventriculus weight and bursa weight were higher in FVW groups. No differences were observed for other inner relative organ weights (liver weight, gizzard weight spleen and abdominal fat weight) compared with the control and antibiotic groups. Dietary inclusion of FVW increased dry matter, crude protein and ether extract retention compared with control and antibiotic groups. Excreta dry matter content was higher and pH lower, in the FVW groups than in the control and antibiotic groups. Antibody titres against Newcastle disease, Infectious bronchitis and Avian influenza virus vaccines were higher in FVW groups. Serum immunoglobulin parameters (IgA, IgG, IgM) were higher in FVW than in the control and antibiotic groups. Flammulina velutipes mushroom waste can be used at inclusion levels up to 6% in pullet rations for better immune response and nutrient retention without hampering normal growth performance.Keywords: Antibody titres, apparent nutrient retention, excreta dry matter, serum immunit

In As photodiode for low temperature sensing

We report on the evaluation of InAs photodiodes and their potential for low temperature sensing. InAs n-i-p photodiodes were grown and analyzed in this work. Radiation thermometry measurements were performed at reference blackbody temperatures of 37 to 80°C to determine photocurrent and temperature error. The uncooled InAs photodiodes, with a cutoff wavelength of 3.55 μm, detect a target temperature above 37°C with a temperature error of less than 0.46°C. When the photodiode was cooled to 200 K, the temperature error at 37°C improves by 10 times from 0.46 to 0.048°C, suggesting the potential of using InAs for human temperature sensing. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

InGaAs/InAlAs single photon avalanche diode for 1550 nm photons.

A single photon avalanche diode (SPAD) with an InGaAs absorption region, and an InAlAs avalanche region was designed and demonstrated to detect 1550 nm wavelength photons. The characterization included leakage current, dark count rate and single photon detection efficiency as functions of temperature from 210 to 294 K. The SPAD exhibited good temperature stability, with breakdown voltage dependence of approximately 45 mV K(-1). Operating at 210 K and in a gated mode, the SPAD achieved a photon detection probability of 26% at 1550 nm with a dark count rate of 1 × 10(8) Hz. The time response of the SPAD showed decreasing timing jitter (full width at half maximum) with increasing overbias voltage, with 70 ps being the smallest timing jitter measured