796 research outputs found
Organic rankine cycle with positive displacement expander and variable working fluid composition
Organic Rankine Cycles are often used in the exploitation of low-temperature heat sources. The relatively small temperature differential available to these projects makes them particularly vulnerable to changing ambient conditions, especially if an air-cooled condenser is used. The authors have recently demonstrated that a dynamic ORC with a variable working fluid composition, tuned to match the condensing temperature with the heat sink, can be used to achieve a considerable increase in year-round power generation under such conditions [1]. However, this assumed the expander was a turbine capable of operating at multiple pressure ratios for large scale applications. This paper will investigate if small scale ORC systems that use positive-displacement expanders with fixed expansion ratios could also benefit from this new concept. In this paper, a numerical model was firstly developed. A comprehensive analysis was then conducted for a case study. The results showed that the dynamic Organic Rankine Cycle concept can be applied to lower-power applications that use that use positive-displacement expanders with fixed expansion ratios and still result in improvements in year-round energy generation
Using a side-branched volume to tune the acoustic field in a looped-tube travelling-wave thermoacoustic engine with a RC load
Travelling-wave thermoacoustic engine utilises a compact acoustic network to obtain a right time-phasing between the acoustic velocity and pressure oscillations within the regenerator to force gas parcels to experience a Stirling-like thermodynamic cycle. As such, thermal energy can be converted to mechanical work (i.e., high-intensity pressure waves). It is therefore crucial to control the time-phasing carefully to improve the performance of thermoacoustic engines. Various ways have been proposed and demonstrated for adjusting time-phasing, including both passive and active methods. The aim of this study is to introduce a new passive phase tuning method (i.e., a side-branched acoustic volume) to tune the time-phasing within a looped-tube travelling wave thermoacoustic engine. The proposed concept has been investigated both numerically and experimentally in this research. An experimental rig was simulated and designed using DeltaEC software (Design Environment for Low-amplitude ThermoAcoustic Energy Conversion). It was then constructed according to the obtained theoretical model. The result of this study showed a qualitative agreement between experimental measurement and numerical simulations, demonstrating that the proposed technique can effectively adjust the phase angle between the acoustic velocity and pressure oscillations within the loop-tube thermoacoustic engines, and improve its performance
A dynamic organic Rankine cycle using a zeotropic mixture as the working fluid with composition tuning to match changing ambient conditions
Air-cooled condensers are widely used for Organic Rankine Cycle (ORC) power plants where cooling water is unavailable or too costly, but they are then vulnerable to changing ambient air temperatures especially in continental climates, where the air temperature difference between winter and summer can be over 40 °C. A conventional ORC system using a single component working fluid has to be designed according to the maximum air temperature in summer and thus operates far from optimal design conditions for most of the year, leading to low annual average efficiencies. This research proposes a novel dynamic ORC that uses a binary zeotropic mixture as the working fluid, with mechanisms in place to adjust the mixture composition dynamically during operation in response to changing heat sink conditions, significantly improving the overall efficiency of the plant. The working principle of the dynamic ORC concept is analysed. The case study results show that the annual average thermal efficiency can be improved by up to 23% over a conventional ORC when the heat source is 100 °C, while the evaluated increase of the capital cost is less than 7%. The dynamic ORC power plants are particularly attractive for low temperature applications, delivering shorter payback periods compared to conventional ORC systems
Investigation on efficiency improvement of a Kalina cycle by sliding condensation pressure method
Conventional Kalina cycle-based geothermal power plants are designed with a fixed working point determined by the local maximum ambient temperature during the year. A previous study indicated that the plant’s annual average thermal efficiency would be improved if the ammonia mass fraction of the Kalina cycle could be tuned to adapt to the ambient conditions. In this paper, another sliding condensation pressure method is investigated. A theoretical model is set up and then a numerical program is developed to analyze the cycle performance. The condensation pressure adjustment in accordance to the changing ambient temperature has been numerically demonstrated under various ammonia-water mixture concentrations. The results indicate that the Kalina cycle using sliding condensation pressure method can achieve much better annual average thermal efficiency than a conventional Kalina cycle through matching the cycle with the changing ambient temperature via controlling condensation pressure. Furthermore, the sliding condensation pressure method is compared with the composition tuning method. The results show that the annual average efficiency improvement of the sliding condensation pressure method is higher than that of the composition tuning method
Dynamic control strategy of a distillation system for a composition-adjustable organic Rankine cycle
Using zeotropic mixtures as working fluids can improve the thermal efficiency of Organic Rankine cycle (ORC) power plants for utilising geothermal energy. However, currently, such ORC systems cannot regulate the composition of zeotropic mixtures when their operating conditions change. A composition-adjustable ORC system could potentially improve the thermal efficiency by closely matching the cycle to the changing ambient conditions provided that the composition of the working fluid mixture can be adjusted in an economic way. In this paper, a dynamic composition control strategy has been proposed and analysed for such a composition-adjustable ORC system. This method employs a distillation column to separate the two components of the mixture, which can then be pumped back to the main ORC system to adjust the composition of the zeotropic mixture to the required level according to the ambient temperature. The dynamic composition control strategy is simulated using an optimisation algorithm. The design method of the distillation column is presented and its dynamic response characteristics have been analysed using Aspen Plus Dynamics. The results indicate that the average power output can be significantly improved using a composition-adjustable ORC system when the ambient temperature decreases. The size of the distillation system is relatively small and its energy (mainly thermal) consumption is only around 1 percent of the system’s input heat. The research results also show that the dynamic response characteristics of the distillation system can satisfy the requirements of the ORC system
Design and analysis of a thermally driven thermoacoustic air conditioner for low grade heat recovery
This paper presents the design and analysis of a thermally driven thermoacoustic cooler, which aims to
utilise industrial waste heat to provide air-conditioning for buildings where waste heat are abundant
but air conditioning is required. The working gas is helium at 3.0 MPa. The operating frequency is
around 100 Hz. A three-stage travelling wave thermoacoustic engine is design to convert waste heat to
acoustic power, and a single stage travelling wave thermoacoustic cooler is connected to the engine to
provide cold water at temperature of 0-5 â—¦C for air conditioning. The ambient temperature is set as 40
â—¦C. The simulation results show that the engine can convert 9.9% of the 15 kW heat input (at a
temperature of 200 â—¦C) to 1.5 kW acoustic power, and that the cooler can delivery 2.6 kW cooling
power at 0 â—¦C with a coefficient of performance (COP) of 2.25
A Combined Organic Rankine Cycle-Heat Pump System for Domestic Hot Water Application
This paper investigates a novel system to improve the efficiency of using natural gas for domestic heating. The exhaust from a gas burner powers a small-scale Organic Rankine Cycle (ORC) system using hexane as the working fluid, which is used to directly drive the compressor of a heat pump, using R134a as the working fluid. Water is heated from ambient by passing it through three heat exchangers, the condenser of the Heat Pump, the condenser of the ORC, and the secondary heat exchanger that is heated by the hot flue gas from the burner after it transfers the heat to the evaporator of the ORC subsystem. By using the heat generated from the burning of gas in a burner in this way, a fuel-to-usable-heat efficiency of up to 160% is projected, outperforming the other technologies discussed, giving it the potential to significantly reduce energy demand and carbon emissions. This paper investigates the effect of varying ambient conditions upon the cycle, namely the temperature of ambient air, which has a strong effect on the performance of the heat pump
Design and analysis of a thermally driven thermoacoustic air conditioner for low grade heat recovery
This paper presents the design and analysis of a thermally driven thermoacoustic cooler, which aims to
utilise industrial waste heat to provide air-conditioning for buildings where waste heat are abundant
but air conditioning is required. The working gas is helium at 3.0 MPa. The operating frequency is
around 100 Hz. A three-stage travelling wave thermoacoustic engine is design to convert waste heat to
acoustic power, and a single stage travelling wave thermoacoustic cooler is connected to the engine to
provide cold water at temperature of 0-5 â—¦C for air conditioning. The ambient temperature is set as 40
â—¦C. The simulation results show that the engine can convert 9.9% of the 15 kW heat input (at a
temperature of 200 â—¦C) to 1.5 kW acoustic power, and that the cooler can delivery 2.6 kW cooling
power at 0 â—¦C with a coefficient of performance (COP) of 2.25
Combined power and freshwater generation driven by liquid-dominated geothermal sources
In order to meet the twin challenges of energy shortage and water scarcity in eastern Africa, this paper looks at the feasibilities of using a geothermal water source to produce both fresh water and electricity. In this research, three geothermally sourced combined power and freshwater generation systems are investigated and compared. Two of them are based on traditional power generation systems, including a steam system (SS) and a single-flash system (SFS). The third one is a trilateral flash system (TFS) with a two-phase turbine, which processes the total geofluid flow from the wellhead directly. The power generation potential as well as the condensation process, which produces desalinized freshwater, are investigated for three systems under two typical liquid-dominated well conditions in the Aluto Langano geothermal field in Ethiopia. Results indicate that, suitable total flow turbine efficiency enables the trilateral flash system to be comparable with the steam system and the single-flash system regarding the power generation, especially when the well flow is more liquid dominated. Moreover, freshwater generation is a distinct advantage of the trilateral flash system, and its freshwater output can reach up to be 2.7 times higher than those of traditional systems, making it a promising solution for combined power and freshwater generation
Investigation into the Strouhal numbers associated with vortex shedding from parallel-plate thermoacoustic stacks in oscillatory flow conditions
This paper investigates vortex shedding processes occurring at the end of a stack of parallel plates, due to an oscillating
flow induced by an acoustic standing wave. Here the hot-wire anemometry measurement technique is applied to detect
the velocity fluctuations due to vortex shedding near the end of the stack. The hot-wire fast time response enables
obtaining detailed frequency spectra of the velocity signal, which can be used for identifying the dominant frequencies
associated with vortex shedding, and thus allow calculating the corresponding Strouhal numbers. By varying the stack
configuration (the plate thickness and spacing) and the acoustic excitation level (the so-called drive ratio), the impact ofthe stack blockage ratio and the Reynolds number on the Strouhal number has been studied in detail. Furthermore, in the range of the Reynolds numbers between 200 and 5,000 a correlation between the Strouhal number and Reynolds
number has been obtained and compared with analogous relationships in the steady flow. Particle Image Velocimetry
(PIV) is also used to visualize the vortex shedding processes within an acoustic cycle, phase-by-phase, in particular
during the part of the cycle when the fluid flows out of the stack – selected cases are shown for comparisons with hotwire
measurements
- …