Bioplastics and Carbon-Based Sustainable Materials, Components, and Devices: Toward Green Electronics

The continuously growing number of short-life electronics equipment inherently results in a massive amount of problematic waste, which poses risks of environmental pollution, endangers human health, and causes socioeconomic problems. Hence, to mitigate these negative impacts, it is our common interest to substitute conventional materials (polymers and metals) used in electronics devices with their environmentally benign renewable counterparts, wherever possible, while considering the aspects of functionality, manufacturability, and cost. To support such an effort, in this study, we explore the use of biodegradable bioplastics, such as polylactic acid (PLA), its blends with polyhydroxybutyrate (PHB) and composites with pyrolyzed lignin (PL), and multiwalled carbon nanotubes (MWCNTs), in conjunction with processes typical in the fabrication of electronics components, including plasma treatment, dip coating, inkjet and screen printing, as well as hot mixing, extrusion, and molding. We show that after a short argon plasma treatment of the surface of hot-blown PLA-PHB blend films, percolating networks of single-walled carbon nanotubes (SWCNTs) having sheet resistance well below 1 kω/□ can be deposited by dip coating to make electrode plates of capacitive touch sensors. We also demonstrate that the bioplastic films, as flexible dielectric substrates, are suitable for depositing conductive micropatterns of SWCNTs and Ag (1 kω/□ and 1 ω/□, respectively) by means of inkjet and screen printing, with potential in printed circuit board applications. In addition, we exemplify compounded and molded composites of PLA with PL and MWCNTs as excellent candidates for electromagnetic interference shielding materials in the K-band radio frequencies (18.0-26.5 GHz) with shielding effectiveness of up to 40 and 46 dB, respectively.Business Finland (project 1212/31/2020, All green structural electronics), EU Horizon 2020 BBI JU (project 792261, NewPack), and EU Interreg Nord Lapin liitto (project 20201468, Flexible transparent conductive f ilms as electrodes) and Academy of Finland (project 316825, Nigella)

The NOMAD experiment at the CERN SPS

The NOMAD experiment is a short base-line search for $\nu_{\mu}\rightarrow \nu_{\tau}$ oscillations in the CERN neutrino beam. The $\nu_{\tau}$'s are searched for through their charged-current interactions followed by the observation of the resulting $\tau^{-}$ through its electronic, muonic or hadronic decays. These decays are recognized using kinematical criteria necessitating the use of a light target which enables the reconstruction of individual particles produced in the neutrino interactions. This paper describes the various components of the NOMAD detector: the target and muon drift chambers, the electromagnetic and hadronic calorimeters, the preshower and transition radiation detectors, and the veto and trigger scintillation counters. The beam and data acquisition system are also described. The quality of the reconstruction of individual particles is demonstrated through the ability of NOMAD to observe K$^0_{\rm s}$'s, $\Lambda^0$'s and $\pi^0$'s. Finally, the observation of $\tau^{-}$ through its electronic decay being one of the most promising channels in the search, the identification of electrons in NOMAD is discussed

ANALYSE DES PHENOMENES PHYSIQUES LIES AU FONCTIONNEMENT D'UN DETECTEUR GAZEUX A MICRO PISTES MICROMEGAS

ORSAY-PARIS 11-BU Sciences (914712101) / SudocSudocFranceF

Spatial resolution in Micromegas detectors

The performance of a telescope of Micromegas detectors has been studied in a pion beam at the CERN PS. With a gas filling of CF/sub 4 / and 20% isobutane and with a strip pitch of 100 mu m an accuracy of 14+or-3 mu m on the spatial resolution has been measured at normal incidence. A simulation demonstrates that the resolution is limited by the size of the holes of the mesh of the detector and could be reduced to 11 mu m in the same conditions with smaller holes. Even further improvement down to 8.5 mu m is feasible for the same gas with an optimized 75 mu m strip pitch. (5 refs)

Charged particle correlations at y=0 in pp collisions at the CERN ISR

Measurements of the double differential cross sections for pi pi and p pi production in pp collisions at the CERN ISR are presented for 5 c.m. energies square root s=22, 30, 44, 53, 62 GeV. Charge and transverse momentum correlations are also reported. (15 refs)