Effects of salinity, temperature, light intensity and light regimes on production, growth and reproductive parameters of Apocyclops dengizicus

The effects of salinity, temperature, and light conditions on production and development, longevity, survival and sex ratios of the cyclopoid copepod, A. dengizicus were determined. Seven different salinity levels (5, 10, 15, 20, 25, 30, 35 psu), four temperatures (20, 25, 30, 35 °C), three different light intensities (33.3, 85.3, 162.1 μmol photons/ m^2/ s) and light regimes (24:0, 0:24, and 12:12 h light:dark regime) were employed. The highest production was achieved under 20 psu salinity. The optimum temperature required for the maximum reproduction and shortest development time was 35 °C. The production was highest (p<.05) and development rate of A. dengizicus was shortest (p<.05) under the lowest light intensity (33.3 μmol photons/ m^2/ s). Continuous light (24:0 h LD) showed positive effects on growth and production. Light regimes 24:0 h and 12:12 h LD yielded the highest total production and growth (p<.05), with highest (p<.05) survival percentage. This study demonstrated that A. dengizicus can tolerate wide range of environmental conditions and can be cultured for commercial live feed purposes as well as toxicity studies

An Electronically Reconfigurable Patch Antenna Design for Polarization Diversity with Fixed Resonant Frequency

In this paper, an electronically polarization reconfigurable circular patch antenna with fixed resonant frequency operating at Wireless Local Area Network (WLAN) frequency band (2.4-2.48 GHz) is presented. The structure of the proposed design consists of a circular patch as a radiating element fed by coaxial probe, cooperated with four equal-length slits etched on the edge along x-axis and y-axis. A total of four switches was used and embedded across the slits at specific locations, thus controlled the length of the slits. By activating and deactivating the switches (ON and OFF) across the slits, the current on the patch is changed, thus modifying the electric field and polarization of the antenna. Consequently, the polarization excited by the proposed antenna can be switched into three types, either linear polarization, left-hand circular polarization or right-hand circular polarization. This paper proposes a simple approach that able to switch the polarizations and excited at the same operating frequency. Simulated and measured results of ideal case (using copper strip switches) and real case (using PIN diode switches) are compared and presented to demonstrate the performance of the antenna

Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

Cosmos caudatus Kunth. extract reduced number of microflora in oyster mushroom (Pleurotus ostreatus)

Nowadays consumer is more demand on natural foodstuff instead of synthetic product due to their concern on health. The objective of this study is to investigate the effect of C. caudatus extract on the number of microflora in oyster mushroom at different concentration of C. caudatus extract and exposure time using dilution method. The results showed that the number of microorganisms (Log10 CFU/g) in oyster mushroom in term of Total Plate Count (TPC), Bacillus cereus, Escherichia coli and Staphylococcus aureus were 6.13 ± 0.04, 6.15 ± 0.09, 5.97 ± 0.04, and 6.46 ± 0.00, respectively. The effect of C. caudatus extract on microflora in oyster mushroom at concentrations of 0.00%, 0.05%, 0.5%, and 5.0% with exposure time of 0, 5, 10, and 15 min demonstrated that the reduction number of microflora in oyster mushroom was dependent on the concentration of C. caudatus extract and exposure times. The number of TPC (Log10 CFU/g) in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.13 ± 0.04 reduced to 2.62 ± 0.07. Moreover, B. cereus (Log10 CFU/g) in oyster mushroom was significantly reduced by treatment of C. caudatus extract at concentration of 0.05% for 5 min; 6.15 ± 0.09 reduced to 3.77 ± 0.15. Meanwhile, the number of E. coli (Log10 CFU/g) in oyster mushroom was significantly reduced at concentration of 0.05% for 10 min; 5.97 ± 0.04 reduced to 3.21 ± 0.13. Lastly, the survival number of S. aureus in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.46 ± 0.00 reduced to 4.83 ± 0.07. In conclusion, C. caudatus extract has potentiality to be developed as natural sanitizer for rinsing raw food materials such as oyster mushroom

Factors affecting the role of human resource department in private healthcare sector in Pakistan: a case study of Rehman Medical Institute (RMI)

The role of Human Resource Management in healthcare sector and challenges it faces has always been an important area of research both in developed and developing countries. The objective of this study is to evaluate the role of HR department in private healthcare sector in the province of Khyber Pakhtunkhwa (KPK), Pakistan and to analyze the challenges/factors affecting the role of HR department. Being the largest private sector hospital in KPK the researchers have selected RMI as a case for this study. Data was collected through interviews from different levels of employees in RMI. Constant comparative method was used for analyzing the data. Results present that HR department plays the role of an administrative expert in RMI. The major internal factors include workload, top management interference, management style and organizational culture which negatively effect motivation, performance and morale of the employees. While small labour market, undue interference of government and other higher authorities and trade unions are the external factors that affect the role of HR department in RMI. All these external factors create difficulties for HR department to attract and retain the desired workforce

Determination of Level of Food Additives in Labisia Pumila (LP) Beverages Consumed in Kuantan, Malaysia

The content levels of several food additives (gallic acid, benzoic acid and caffeine) in commercial Labisia pumila (LP) beverage samples in Kuantan, Malaysia were determined by high performances liquid chromatography (HPLC). These analytical measurements were undertaken primarily to assess the compliance of content levels of the investigated food additives and their daily intake doses with permissible levels. The results obtained from this study indicated that the average levels of GA, caffeine and benzoic acid in the analyzed beverages were 37.62-229.35 ppm, 43.46 -168.00 ppm and 98.10-241.13 ppm, respectively. In addition, the concentrations of these food additives have been converted into daily intake doses based on beverage consumption. It was estimated that the mean daily intake of GA, caffeine and benzoic acid by the adult population of Kuantan through the consumption of the analyzed beverages were 0.39 mg/kg body weight/day for GA, 0.59 mg/kg body weight/day for caffeine (19.6 % ADI) and 0.43 mg/kg body weight/day for benzoic acid (8.6%ADI). None of the analyzed beverage sample was found to violate the current legal limits as stipulated in Malaysian food regulation

Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers

A Q-switched Thulium-doped Fiber Laser (TDFL) operating at approximately 2 µm wavelength is successfully generated by using four different saturable absorbers (SAs) which are nitrogen-doped graphene in PVA (NG:PVA), nitrogen-doped graphene in PEO (NG:PEO), single-walled carbon nanotube in PVA (SWCNT:PVA), and high pressure carbon monoxide carbon nanotube in PVA (CNTHiPCO:PVA). The SAs integrated in the cavity were able to provide the real saturable absorption in modulating the intra-cavity losses. SWCNT gives the best results with the highest repetition rate and lowest pulse width of 57.45 kHz and 1.958 nJ correspondingly as compared to the other three SAs

An overview of moisture damage performance tests on asphalt mixtures

This paper presents a review of moisture damage performance tests on asphalt mixtures. The moisture damage remains to be a detriment to the durability of the Hot Mix Asphalt (HMA) pavement. Moisture damage can be defined in forms of adhesive failure between bitumen and aggregates and cohesive failure within bitumen. Aggregate mineralogy, bitumen characteristics and anti-stripping additive dominantly influence the performance of asphalt mixtures towards moisture damage alongside construction methods, climate and traffic loading. Various laboratory test methods have been developed to quantify the moisture damage performance of asphalt mixtures by resembles the action in the field, including qualitative test such as Boiling Water Test (ASTM D3625) and quantitative tests such as Modified Lottman Test (AASHTO T283). Both of these tests consist of two phases, which are conditioning and evaluation phase. This paper will review the effectiveness of the selected available tests based on various asphalt mixtures materials. Generally, this study indicates that asphalt mixtures consisted of limestone aggregates, modified bitumen and addition of anti-stripping additives will provide more resistant towards moisture damage

Observation of built-up edge formation on a carbide cutting tool with machining aluminium alloy under dry and wet conditions

This paper presents the morphology of built-up edge (BUE) formation under wet and dry conditions with low and high cutting speeds. The workpiece materials and cutting tools selected for this work were aluminium alloy and canela carbide inserts graded PM25. The cutting tools underwent turning operation machining tests and their performance was evaluated by the flank wear and observation of the tool wear area. The machining tests were conducted at different spindle speeds and feed rates while the cut depth was kept constant. The analysis showed that formation of the BUE was dominant at low cutting speeds in dry conditions, but in wet conditions at high cutting speeds, a better performance was exhibited in terms of wear analysis