Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

An Electronically Reconfigurable Patch Antenna Design for Polarization Diversity with Fixed Resonant Frequency

In this paper, an electronically polarization reconfigurable circular patch antenna with fixed resonant frequency operating at Wireless Local Area Network (WLAN) frequency band (2.4-2.48 GHz) is presented. The structure of the proposed design consists of a circular patch as a radiating element fed by coaxial probe, cooperated with four equal-length slits etched on the edge along x-axis and y-axis. A total of four switches was used and embedded across the slits at specific locations, thus controlled the length of the slits. By activating and deactivating the switches (ON and OFF) across the slits, the current on the patch is changed, thus modifying the electric field and polarization of the antenna. Consequently, the polarization excited by the proposed antenna can be switched into three types, either linear polarization, left-hand circular polarization or right-hand circular polarization. This paper proposes a simple approach that able to switch the polarizations and excited at the same operating frequency. Simulated and measured results of ideal case (using copper strip switches) and real case (using PIN diode switches) are compared and presented to demonstrate the performance of the antenna

Performance Investigation of Dual Wavelength Fiber Laser using different SOAs

We investigated the performance of a dual wavelength fiber laser (DWFL) using different types of semiconductor optical amplifiers (SOAs) utilizing fiber Bragg gratings (FBGs) as comb filter. The lasing performances of linear SOA (LSOA), nonlinear SOA (NLSOA) and booster optical amplifier (BOA) at different current setting were observed. LSOA produced the flattest spectrum based on its peak power difference at only 4.5 dB as compared to 66.4 dB using BOA. BOA has the worst flatness because its polarization sensitivity is the highest as compared to LSOA and NLSOA. Overall, the best lasing performance is when LSOA is used due to the lowest peak power difference with high peak power at -17.6 dBm

Cosmos caudatus Kunth. extract reduced number of microflora in oyster mushroom (Pleurotus ostreatus)

Nowadays consumer is more demand on natural foodstuff instead of synthetic product due to their concern on health. The objective of this study is to investigate the effect of C. caudatus extract on the number of microflora in oyster mushroom at different concentration of C. caudatus extract and exposure time using dilution method. The results showed that the number of microorganisms (Log10 CFU/g) in oyster mushroom in term of Total Plate Count (TPC), Bacillus cereus, Escherichia coli and Staphylococcus aureus were 6.13 ± 0.04, 6.15 ± 0.09, 5.97 ± 0.04, and 6.46 ± 0.00, respectively. The effect of C. caudatus extract on microflora in oyster mushroom at concentrations of 0.00%, 0.05%, 0.5%, and 5.0% with exposure time of 0, 5, 10, and 15 min demonstrated that the reduction number of microflora in oyster mushroom was dependent on the concentration of C. caudatus extract and exposure times. The number of TPC (Log10 CFU/g) in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.13 ± 0.04 reduced to 2.62 ± 0.07. Moreover, B. cereus (Log10 CFU/g) in oyster mushroom was significantly reduced by treatment of C. caudatus extract at concentration of 0.05% for 5 min; 6.15 ± 0.09 reduced to 3.77 ± 0.15. Meanwhile, the number of E. coli (Log10 CFU/g) in oyster mushroom was significantly reduced at concentration of 0.05% for 10 min; 5.97 ± 0.04 reduced to 3.21 ± 0.13. Lastly, the survival number of S. aureus in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.46 ± 0.00 reduced to 4.83 ± 0.07. In conclusion, C. caudatus extract has potentiality to be developed as natural sanitizer for rinsing raw food materials such as oyster mushroom

Air cavity-based vibrational piezoelectric energy harvesters

Introduction. Known vibrational energy harvesting methods use a source of vibration to harvest electric energy. Piezoelectric material works as a sensing element converted mechanical energy (vibration) to electrical energy (electric field). The existing piezoelectric energy harvesting (PEHs) devices have low sensitivity, low energy conversion, and low bandwidth. The novelty of the proposed work consists of the design of PEH’s structure. Air cavity was implemented in the design where it is located under the sensing membrane to improve sensitivity. Another novelty is also consisting in the design structure where the flexural membrane was located at the top of electrodes. The third novelty is a new design structure of printed circuit board (PCB). The purpose of improvised design is to increase the stress in between the edges of PEH and increase energy conversion. With the new structure of PCB, it will work as a substrate that absorbs surrounding vibration energy and transfers it to sensing element. Methods. Three techniques were successfully designed in PEH and fabricated namely PEH A, PEH B, and PEH C were characterized by two experiments: load and vibration. The load experiment measured load pressure towards the PEH, whereas the vibration experiment measured stress towards the PEH. Results. PEH C has the highest induced voltage for a weight of 5.2 kg at the frequency of 50 Hz and the highest stored voltage for a period of 4 min. The three techniques applied in PEHs were showed improvement in transducer sensitivity and energy conversion. Practical value. A piezoelectric acoustic generator was used in the experiment to compare the performance of the designed PEH with available piezoelectric transducers in the market. The new flexible membrane worked as a sensing element was worked as a cantilever beam. PVDF was used as a sensing element due to the flexibility of the polymer material, which is expected to improve sensitivity and operating bandwidth.Вступ. Відомі методи збору вібраційної енергії використовують джерело вібрації для збору електричної енергії. П’єзоелектричний матеріал працює як чутливий елемент, перетворюючи механічну енергію (вібрацію) в електричну енергію (електричне поле). Існуючі пристрої збору п’єзоелектричної енергії (ЗПЕ) мають низьку чутливість, низьке перетворення енергії і малу смугу пропускання. Новизна запропонованої роботи полягає в проектуванні конструкції ЗПЕ. У конструкції реалізована повітряна порожнина, яка розташована під чутливої мембраною для підвищення чутливості. Ще один елемент новизни полягає в конструкції, в якій вигиниста мембрана розташована у верхній частині електродів. Третя новизна - це нова конструкція друкованої плати. Мета запропонованої конструкції - збільшити механічну напругу між краями ЗПЕ і підвищити перетворення енергії. Завдяки новій конструкції друкованої плати вона буде працювати як підкладка, яка поглинає навколишню енергію вібрації і передає її на чутливий елемент. Методи. Три методи були успішно використані для проектування ЗПЕ,  і відповідно названі виготовлені ЗПЕ A, ЗПЕ Б і ЗПЕ В були описані двома експериментальними характеристиками: навантаження і вібрація. В експерименті з навантаженням вимірювався тиск навантаження на ЗПЕ, в той час як в експерименті з вібрацією вимірювалася механічна напруга на ЗПЕ. Результати. ЗПЕ В має найвищу індуковану напругу для ваги 5,2 кг при частоті 50 Гц і найвищу збережену напругу протягом 4 хвилин. Три методи, що застосовуються для ЗПЕ, показали поліпшення чутливості перетворювача і перетворення енергії. Практична цінність. В експерименті використовувався п’єзоелектричний акустичний генератор для порівняння характеристик розробленого ЗПЕ з доступними на ринку п’єзоелектричними перетворювачами. Нова гнучка мембрана працювала як чутливий елемент, що представляв собою консольну балка. В якості чутливого елемента використовувався полівініліден фторид завдяки гнучкості полімерного матеріалу, який, як очікується, поліпшить чутливість і робочу смугу пропускання

Oral Health-related Quality of Life Among Pregnant Women at Hospital Universiti Sains Malaysia

This cross sectional study aimed to determine oral health-related quality of life in pregnant women. A total of 100 pregnant women seen at the Obstetrics and Gynaecology Clinic at Hospital Universiti Sains Malaysia participated in this study. The short version of the Malaysian Oral Health Impact Profile (S-OHIP(M)) questionnaire with five-point ordinal scale that ranges from ‘never' to ‘very often' was used to assess the frequency of oral impacts during the previous 12 months. The majority of the respondents were Malay (96.0%), with a mean age of 29.9 years (SD 5.78). The highest education level attained by most respondents was post-secondary qualification or Diploma (39.0%). Some had formal tertiary education (27.0%). The majority of them were income earners (74.0%) and contributed to the household income. Half of the respondents were in their third trimester of pregnancy while the remaining half was either in the first or second trimester. The severity of impact experienced by the women, which is the mean S-OHIP(M) score was high at 10.43 (95% CI = 8.96, 11.90). The prevalence of impact, which is the percentage of respondents reporting ‘fairly often' or ‘very often' to one or more impacts, was 36.0%. Common impacts experienced by the respondents include feeling uncomfortable because food got stuck in between teeth or dentures (22.0%), feeling that oral health problems had caused bad breath (13.0%), and feeling shy because of problems with teeth, mouth or dentures (9.0%). The results also demonstrated that neither the severity nor the prevalence of impact was influenced by the women's socio-demographic background. This study concluded that pregnant women suffered from high impact of oral diseases that could affect their quality of lif

Population dynamics of yellowtail scad, Atule mate (Cuvier 1833) in Marudu Bay, Sabah, Malaysia

The yellowtail scad, Atule mate, forms important fisheries throughout the Indo-Pacific region. To know about the stock status of A. mate in Malaysia, various population parameters were measured, by utilizing length-frequency data, that included asymptotic length (L∞), growth coefficient (K), mortality rates (Z, F and M), exploitation level (E) and recruitment pattern of this species from Marudu Bay, Sabah, Malaysia. Total length and body weight relationship was estimated as W = 0.007TL3.148 (R2 = 0.937). The asymptotic length (L∞) and growth coefficient (K) were estimated 27.80 cm and 1.50 yr−1, respectively. Total mortality (Z), natural mortality (M) and fishing mortality (F) were found to be 4.53, 2.46 and 2.07 yr−1, respectively. The exploitation level (E) was estimated 0.46. It was showed that the recruitment pattern was continuous with two major peaks per year. Relative yield per recruit predicted a maximum exploitation rate (Emax) which was 0.55. The current E value (0.46) is lower than the optimum exploitation (E = 0.50) as well predicted Emax. Therefore, it could be concluded that stock of A. mate in the investigated area of Marudu Bay, Sabah is under exploited