31 research outputs found

    Split spectrum: a multi-channel approach to elastic optical networking

    Get PDF
    This paper introduces Split Spectrum, which enhances elastic optical networking by splitting a bulk traffic demand into multiple channels, when a single-channel transmission is prohibited by distance or spectrum availability. We performed transmission simulations to determine the maximum reach as a function of modulation format (dual polarization BPSK, QPSK, 16QAM), baud-rate (from 5 to 28 GBd), and number of ROADMs, for a Nyquist WDM super-channel with subcarrier spacing equal to 1.2 x baud-rate. Performance evaluation on two representative topologies shows that, compared to the previously proposed elastic optical networking, Split Spectrum doubles the zero-blocking load and achieves 100% higher network spectral efficiency at zero-blocking loads as a result of extended transmission distance and efficient utilization of spectrum fragments. (C) 2012 Optical Society of Americ

    Machine-learning-aided cognitive reconfiguration for flexible-bandwidth HPC and data center networks [Invited]

    Get PDF
    This paper proposes a machine-learning (ML)-aided cognitive approach for effective bandwidth reconfiguration in optically interconnected datacenter/high-performance computing (HPC) systems. The proposed approach relies on a Hyper-X-like architecture augmented with flexible-bandwidth photonic interconnections at large scales using a hierarchical intra/inter-POD photonic switching layout. We first formulate the problem of the connectivity graph and routing scheme optimization as a mixed-integer linear programming model. A two-phase heuristic algorithm and a joint optimization approach are devised to solve the problem with low time complexity. Then, we propose an ML-based end-to-end performance estimator design to assist the network control plane with intelligent decision making for bandwidth reconfiguration. Numerical simulations using traffic distribution profiles extracted from HPC applications traces as well as random traffic matrices verify the accuracy performance of the ML design estimator (<9% error) and demonstrate up to 5 x throughput gain from the proposed approach compared with the baseline Hyper-X network using fixed all-to-all intra/inter-portable data center interconnects. (C) 2021 Optical Society of Americ

    LIONS: An AWGR-Based Low-Latency Optical Switch for High-Performance Computing and Data Centers

    Get PDF
    This paper discusses the architecture of an arrayed waveguide grating router (AWGR)-based low-latency interconnect optical network switch called LIONS, and its different loopback buffering schemes. A proof of concept is demonstrated with a 4 x 4 experimental testbed. A simulator was developed to model the LIONS architecture and was validated by comparing experimentally obtained statistics such as average end-to-end latency with the results produced by the simulator. Considering the complexity and cost in implementing loopback buffers in LIONS, we propose an all-optical negative acknowledgement (AO-NACK) architecture in order to remove the need for loopback buffers. Simulation results for LIONS with AO-NACK architecture and distributed loopback buffer architecture are compared with the performance of the flattened butterfly electrical switching network

    Rapid and complete hitless defragmentation method using a coherent RX LO with fast wavelength tracking in elastic optical networks

    Get PDF
    This paper demonstrates a rapid and full hitless defragmentation method in elastic optical networks exploiting a new technique for fast wavelength tracking in coherent receivers. This technique can be applied to a single-carrier connection or each of the subcarriers forming a superchannel. A proof-of-concept demonstration shows hitless defragmentation of a 10 Gb/s QPSK single-carrier connection from 1547.75 nm to 1550.1 nm in less than 1 mu s. This was obtained using a small (0.625 kB) link-layer transmitter buffer without the need for any additional transponder. We also demonstrated that the proposed defragmentation technique is capable of hopping over an existing connection, i.e. 10 Gb/s OOK at 1548.5 nm, without causing any degradation of its real-time Bit Error Rate (BER) value. The proposed scheme gives advantages in terms of overall network blocking probability reduction up to a factor of 40. (C) 2012 Optical Society of Americ

    A scalable silicon photonic chip-scale optical switch for high performance computing systems

    Get PDF
    This paper discusses the architecture and provides performance studies of a silicon photonic chip-scale optical switch for scalable interconnect network in high performance computing systems. The proposed switch exploits optical wavelength parallelism and wavelength routing characteristics of an Arrayed Waveguide Grating Router (AWGR) to allow contention resolution in the wavelength domain. Simulation results from a cycle-accurate network simulator indicate that, even with only two transmitter/receiver pairs per node, the switch exhibits lower end-to-end latency and higher throughput at high (> 90%) input loads compared with electronic switches. On the device integration level, we propose to integrate all the components (ring modulators, photodetectors and AWGR) on a CMOS-compatible silicon photonic platform to ensure a compact, energy efficient and cost-effective device. We successfully demonstrate proof-of-concept routing functions on an 8 x 8 prototype fabricated using foundry services provided by OpSIS-IME. (C) 2013 Optical Society of Americ

    Experimental demonstration of flexible bandwidth networking with real-time impairment awareness

    Get PDF
    We demonstrate a flexible-bandwidth network testbed with a real-time, adaptive control plane that adjusts modulation format and spectrum-positioning to maintain quality of service (QoS) and high spectral efficiency. Here, low-speed supervisory channels and field-programmable gate arrays (FPGAs) enabled real-time impairment detection of high-speed flexible bandwidth channels (flexpaths). Using premeasured correlation data between the supervisory channel quality of transmission (QoT) and flexpath QoT, the control plane adapted flexpath spectral efficiency and spectral location based on link quality. Experimental demonstrations show a back-to-back link with a 360-Gb/s flexpath in which the control plane adapts to varying link optical signal to noise ratio (OSNR) by adjusting the flexpath's spectral efficiency (i.e., changing the flexpath modulation format) between binary phase-shift keying (BPSK), quaternary phase-shift keying (QPSK), and eight phase-shift keying (8PSK). This enables maintaining the data rate while using only the minimum necessary bandwidth and extending the OSNR range over which the bit error rate in the flexpath meets the quality of service (QoS) requirement (e. g. the forward error correction (FEC) limit). Further experimental demonstrations with two flexpaths show a control plane adapting to changes in OSNR on one link by changing the modulation format of the affected flexpath (220 Gb/s), and adjusting the spectral location of the other flexpath (120 Gb/s) to maintain a defragmented spectrum. (C) 2011 Optical Society of Americ

    Silicon optical modulators

    Get PDF
    Optical technology is poised to revolutionize short-reach interconnects. The leading candidate technology is silicon photonics, and the workhorse of such an interconnect is the optical modulator. Modulators have been improved dramatically in recent years, with a notable increase in bandwidth from the megahertz to the multigigahertz regime in just over half a decade. However, the demands of optical interconnects are significant, and many questions remain unanswered as to whether silicon can meet the required performance metrics. Minimizing metrics such as the device footprint and energy requirement per bit, while also maximizing bandwidth and modulation depth, is non-trivial. All of this must be achieved within an acceptable thermal tolerance and optical spectral width using CMOS-compatible fabrication processes. This Review discusses the techniques that have been (and will continue to be) used to implement silicon optical modulators, as well as providing an outlook for these devices and the candidate solutions of the future

    Flex-LIONS: a Silicon Photonic Bandwidth-Reconfigurable Optical Switch Fabric

    Get PDF
    This paper summarizes our recent studies on architecture, photonic integration, system validation and networking performance analysis of a flexible low-latency interconnect optical network switch (FlexLIONS) for datacenter and high-performance computing (HPC) applications. Flex-LIONS leverages the all-to-all wavelength routing property in arrayed waveguide grating routers (AWGRs) combined with microring resonator (MRR)-based add/drop filtering and multi-wavelength spatial switching to enable topology and bandwidth reconfigurability to adapt the interconnection to different traffic profiles. By exploiting the multiple free spectral ranges of AWGRs, it is also possible to provide reconfiguration while maintaining minimum-diameter all-to-all interconnectivity. We report experimental results on the design, fabrication, and system testing of 8 × 8 silicon photonic (SiPh) Flex-LIONS chips demonstrating error-free all-to-all communication and reconfiguration exploiting different free spectral ranges (FSR0 and FSR1, respectively). After reconfiguration in FSR1, the bandwidth between the selected pair of nodes is increased from 50 Gb/s to 125 Gb/s while an all interconnectivity at 25 Gb/s is maintained using FSR0. Finally, we investigate the use of Flex-LIONS in two different networking scenarios. First, networking simulations for a 256-node datacenter inter-rack communication scenario show the potential latency and energy benefits when using Flex-LIONS for optical reconfiguration based on different traffic profiles (a legacy fat-tree architecture is used for comparison). Second, we demonstrate the benefits of leveraging two FSRs in an 8-node 64-core computing system to provide reconfiguration for the hotspot nodes while maintaining minimum-diameter all-to-all interconnectivity

    Scalable optical interconnect architecture using AWGR-based TONAK LION switch with limited number of wavelengths

    No full text
    This paper analyzes the scalability in arrayed waveguide grating router (AWGR)-based interconnect architectures and demonstrates active AWGR-based switching using a distributed control plane. First, the paper analyses an all-to-all single AWGR passive interconnection with NN nodes and proposes a new architecture that overcomes the scalability limitation given by wavelength registration and crosstalk, by introducing multiples of smaller AWGRs (W(W × W)W) operating on a fewer number of wavelengths (W < N). Second, this paper demonstrates active AWGR switching with a distributed control plane, to be used when the size of the interconnection network makes the all-to-all approach using passive AWGRs impractical. In particular, an active AWGR-based TONAK switch is introduced. TONAK combines an all-optical NACK technique, which removes the need for electrical buffers at the switch input/output ports, and a TOKEN technique, which enables a distributed all-optical arbiter to handle packet contention. The experimental validation and performance study of the AWGR-based TONAK switch is presented, demonstrating the feasibility of the TONAK solution and the high throughput and low average packet latency for an up to 75% offered load. © 2013 IEEE
    corecore