61 research outputs found
An Injector for the CLIC Test Facility (CTF3)
The CLIC Test Facility (CTF3) is an intermediate step to demonstrate the technical feasibility of the key concepts of the new RF power source for CLIC. CTF3 will use electron beams with an energy range adjustable from 170 MeV (3.5 A) to 380 MeV (with low current). The injector is based on a thermionic gun followed by a classical bunching system embedded in a long solenoidal field. As an alternative, an RF photo-injector is also being studied. The beam dynamics studies on how to reach the stringent beam parameters at the exit of the injector are presented. Simulations performed with the EGUN code showed that a current of 7 A can be obtained with an emittance less than 10 mm.mrad at the gun exit. PARMELA results are presented and compared to the requested beam performance at the injector exit. Sub-Harmonic Bunchers (SHB) are foreseen, to switch the phase of the bunch trains by 180 degrees from even to odd RF buckets. Specific issues of the thermionic gun and of the SHB with fast phase switch are discussed
Molybdenum sputtering film characterization for high gradient accelerating structures
Technological advancements are strongly required to fulfill the demands of
new accelerator devices with the highest accelerating gradients and operation
reliability for the future colliders. To this purpose an extensive R&D
regarding molybdenum coatings on copper is in progress. In this contribution we
describe chemical composition, deposition quality and resistivity properties of
different molybdenum coatings obtained via sputtering. The deposited films are
thick metallic disorder layers with different resistivity values above and
below the molibdenum dioxide reference value. Chemical and electrical
properties of these sputtered coatings have been characterized by Rutherford
backscattering, XANES and photoemission spectroscopy. We will also present a
three cells standing wave section coated by a molybdenum layer 500 nm
thick designed to improve the performance of X-Band accelerating systems.Comment: manuscript has been submitted and accepted by Chinese Physics C
(2012
CTF3 drive-beam injector design
The Two-Beam Accelerator concept is one of the most promising methods for producing RF power for future linear colliders. In particular it allows upgrades to multi-TeV energies. One of its challenges is the production of the high current drive beam, which as it passes through decelerating structures, produces rf power for acceleration of the main beam. These challenges must be studied at a smaller scale test facility
The Next Linear Collider Test Accelerator
During the past several years, there has been tremendous progress on the development of the RF system and accelerating structures for a Next Linear Collider (NLC). Developments include high-power klystrons, RF pulse compression systems and damped/detuned accelerator structures to reduce wakefields. In order to integrate these separate development efforts into an actual X-band accelerator capable of accelerating the electron beams necessary for an NLC, we are building an NLC Test Accelerator (NLCTA). The goal of the NLCTA is to bring together all elements of the entire accelerating system by constructing and reliably operating an engineered model of a high-gradient linac suitable for the NLC. The NLCTA will serve as a testbed as the design of the NLC evolves. In addition to testing the RF acceleration system, the NLCTA is designed to address many questions related to the dynamics of the beam during acceleration. In this paper, we will report on the status of the design, component development, and construction of the NLC Test Accelerator
NEXT LINEAR COLLIDER TEST ACCELERATOR INJECTOR UPGRADE
The Next Linear Collider Test Accelerator (NLCTA) being built at SLAC will integrate the new technologies of X-band Accelerator structures and RF systems for the Next Linear Collider, demonstrate multibunch beam-loading energy compensation and suppression of higher-order deflecting modes, and measure the dark current generated b
Recommended from our members
NLC electron injector beam dynamics
The Next Linear Collider (NLC) being designed at SLAC requires a train of 90 electron bunches 1.4 ns apart at 120 Hz. The intensity and emittance required at the interaction point, and the various machine systems between the injector and the IP determine the beam requirements from the injector. The style of injector chosen for the NLC is driven by the fact that the production of polarized electrons at the IP is a must. Based on the successful operation of the SLC polarized electron source a similar type of injector with a DC gun and subharmonic bunching system is chosen for the NLC
NLCTA Injector Experimental Results*
The purpose of the Next Linear Collider Test Accelerator (NLCTA) at SLAC is to integrate the new technologies of X-band accelerator structures and RF systems for the Next Linear Collider (NLC), demonstrate multibunch beam-loading energy compensation and suppression of higher-order deflecting modes, measure the transverse components of the accelerating field, and measure the dark current generated by RF field emission in the accelerator [1]. For beam loading R&D, an average current of about 1 A in a 120 ns long bunch train is required. The initial commissioning of the NLCTA injector, as well as the rest of the accelerator have been progressing very well. The initial beam parameters are very close to the requirement and we expect that injector will meet the specified requirements by the end of this summer.
- âŠ