8,797 research outputs found
The Influence of Waste Glass Powder on the Chloride Binding Capacity of Fly Ash/Cement hardened paste
The potential of using waste glass powder to increase the chloride binding capacity of fly ash/cement hardened paste was investigated. When only fly ash replacing cement, the chloride binding capacity was raised within 28d when the fly ash replacement level was in the range from 30-50% by mass. But at a longer age of 60 to 90d, the binding performance was increased at the replacement level of 10-30wt%. The chloride binding capacity of glass powder-fly ash-cement system was increased by adding glass powder of 2% and 4% by mass at 7d while those at larger addition and longer age reduced. The reduction was found to be related to the release of alkali ion due to the addition of glass powder in the paste
A quasi-Monte Carlo method for computing areas of point-sampled surfaces
A novel and efficient quasi-Monte Carlo method for computing the area of a point-sampled surface with associated surface normal for each point is presented. Our method operates directly on the point cloud without any surface reconstruction procedure. Using the CauchyâCrofton formula, the area of the point-sampled surface is calculated by counting the number of intersection points between the point cloud and a set of uniformly distributed lines generated with low-discrepancy sequences. Based on a clustering technique, we also propose an effective algorithm for computing the intersection points of a line with the point-sampled surface. By testing on a number of point-based models, experiments suggest that our method is more robust and more efficient than those conventional approaches based on surface reconstruction.postprin
Heterogeneous mantle source and magma differentiation of quaternary arc-like volcanic rocks from Tengchong, SE margin of the Tibetan Plateau
The Tengchong volcanic field north of the Burma arc comprises numerous Quaternary volcanoes in the southeastern margin of the Tibetan Plateau. The volcanic rocks are grouped into four units (1-4) from the oldest to youngest. Units 1, 3 and 4 are composed of olivine trachybasalt, basaltic trachyandesite and trachyandesite, and Unit 2 consists of hornblende dacite. The rocks of Units 1, 3, and 4 form a generally alkaline suite in which the rocks plot along generally linear trends on Harker diagrams with only slight offset from unit to unit. They contain olivine phenocrysts with Fo values ranging from 65 to 85 mol% and have Cr-spinel with Cr# ranging from 23 to 35. All the rocks have chondrite-normalized REE patterns enriched in LREE and primitive mantle-normalized trace element patterns depleted in Ti, Nb and Ta, but they are rich in Th, Ti and P relative to typical arc volcanics. Despite minor crustal contamination, 87Sr/ 86Sr ratios (0.706-0.709), ΔNd values (-3.2 to -8.7), and ΔHf values (+4.8 to -6.4) indicate a highly heterogeneous mantle source. The Pb isotopic ratios of the lavas ( 206Pb/ 204Pb = 18.02-18.30) clearly show an EMI-type mantle source. The underlying mantle source was previously modified by subduction of the Neo-Tethyan oceanic and Indian continental lithosphere. The present heterogeneous mantle source is interpreted to have formed by variable additions of fluids and sediments derived from the subducted Indian Oceanic lithosphere, probably the Ninety East Ridge. Magma generation and emplacement was facilitated by transtensional NS-trending strike-slip faulting. © 2011 The Author(s).published_or_final_versionSpringer Open Choice, 28 May 201
Preparation of NiâYSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC
In this work, we propose the preparation of a duplex anodic layer composed of both a thin (100 nm) and a thick film (10 lm) with NiâYSZ material. The support of this anode is a metallic substrate, which is the interconnect of the SOFC unit cell. The metallic support limits the temperature of thermal treatment at 800 C to keep a good interconnect mechanical behaviour and to reduce corrosion. We have chosen to elaborate anodic coatings by solâgel route coupled with dip-coating process, which are low cost techniques and allow working with moderate temperatures. Thin films are obtained by dipping interconnect substrate into a sol, and thick films into an optimized slurry. After thermal treatment at only 800 C, anodic coatings are adherent and homogeneous. Thin films have compact microstructures that confer ceramic protective barrier on metal surface. Further coatings of 10 lm thick are porous and constitute the active anodic material
Deep Lesion Graphs in the Wild: Relationship Learning and Organization of Significant Radiology Image Findings in a Diverse Large-scale Lesion Database
Radiologists in their daily work routinely find and annotate significant
abnormalities on a large number of radiology images. Such abnormalities, or
lesions, have collected over years and stored in hospitals' picture archiving
and communication systems. However, they are basically unsorted and lack
semantic annotations like type and location. In this paper, we aim to organize
and explore them by learning a deep feature representation for each lesion. A
large-scale and comprehensive dataset, DeepLesion, is introduced for this task.
DeepLesion contains bounding boxes and size measurements of over 32K lesions.
To model their similarity relationship, we leverage multiple supervision
information including types, self-supervised location coordinates and sizes.
They require little manual annotation effort but describe useful attributes of
the lesions. Then, a triplet network is utilized to learn lesion embeddings
with a sequential sampling strategy to depict their hierarchical similarity
structure. Experiments show promising qualitative and quantitative results on
lesion retrieval, clustering, and classification. The learned embeddings can be
further employed to build a lesion graph for various clinically useful
applications. We propose algorithms for intra-patient lesion matching and
missing annotation mining. Experimental results validate their effectiveness.Comment: Accepted by CVPR2018. DeepLesion url adde
Seedless Pattern Growth of Quasi-Aligned ZnO Nanorod Arrays on Cover Glass Substrates in Solution
A hybrid technique for the selective growth of ZnO nanorod arrays on wanted areas of thin cover glass substrates was developed without the use of seed layer of ZnO. This method utilizes electron-beam lithography for pattern transfer on seedless substrate, followed by solution method for the bottom-up growth of ZnO nanorod arrays on the patterned substrates. The arrays of highly crystalline ZnO nanorods having diameter of 60 ± 10 nm and length of 750 ± 50 nm were selectively grown on different shape patterns and exhibited a remarkable uniformity in terms of diameter, length, and density. The room temperature cathodluminescence measurements showed a strong ultraviolet emission at 381 nm and broad visible emission at 585â610 nm were observed in the spectrum
Photoconductivity of biased graphene
Graphene is a promising candidate for optoelectronic applications such as
photodetectors, terahertz imagers, and plasmonic devices. The origin of
photoresponse in graphene junctions has been studied extensively and is
attributed to either thermoelectric or photovoltaic effects. In addition, hot
carrier transport and carrier multiplication are thought to play an important
role. Here we report the intrinsic photoresponse in biased but otherwise
homogeneous graphene. In this classic photoconductivity experiment, the
thermoelectric effects are insignificant. Instead, the photovoltaic and a
photo-induced bolometric effect dominate the photoresponse due to hot
photocarrier generation and subsequent lattice heating through electron-phonon
cooling channels respectively. The measured photocurrent displays polarity
reversal as it alternates between these two mechanisms in a backgate voltage
sweep. Our analysis yields elevated electron and phonon temperatures, with the
former an order higher than the latter, confirming that hot electrons drive the
photovoltaic response of homogeneous graphene near the Dirac point
Hepatitis B Virus Genotyping Among Chronic Hepatitis B Individuals With Resistance to Lamivudine in Shahrekord, Iran
Background: Hepatitis B infection, caused by hepatitis B Virus (HBV), is one of the major global public health problems. Hepatitis B Virus genotypes appear to show varying geographic distribution with possible pathogenic and therapeutic differences. Knowledge of HBV genotypes is very important for clinical treatment. Lamivudine is a nucleoside analogue that is clinically used to treat chronic hepatitis B infection. However, the main problem with the application of lamivudine is the development of viral resistance to the treatment with this anti viral drug. Besides, it has been suggested that lamivudine-resistant HBV may be genotype dependent. However, HBV genotype distribution and the biological relevance in this region are poorly understood. Objectives: The current study aimed to determine hepatitis B genotypes and their correlation with lamivudine-resistant HBV frequency among patients with chronic hepatitis B from Shahrekord, Iran. Methods and Materials: Hepatitis B virus DNA was detected by conventional PCR in some of the serum samples obtained from HBsAg-positive Chronic Hepatitis B (CHB) patients who were referred to Health Centers of Shahrekord for routine monitoring of the disease. Subsequently, using real-time PCR, the DNA samples were used for genotyping and analysis of resistance to lamivudine. Results: The DNA was detected in 23 out of 116 (19.82%) of the studied samples. Genotypes D and C were found in 17 out of 23 (73.9%), and in 6 out of 23 (26.1%) of the samples, respectively. To the authors' best knowledge, the current study is the first report on isolation of Genotype C from Iran. Two out of 17 (11.76%), and 6 out of 6 (100%) of genotypes D and C were resistant to lamivudine, respectively. Resistance to this drug was significantly different between genotypes C and D (P < 0.001). Conclusions: In addition to genotype D, other lamivudine resistant hepatitis B genotypes might be distributed in Iran
Climate changes reconstructed from a glacial lake in High Central Asiaover the past two millennia
Climatic changes in Arid Central Asia (ACA) over the past two millennia have been widely concerned. However, less attention has been paid to those in the High Central Asia (HCA), where the Asian water tower nurtures the numerous oases by glacier and/or snow melt. Here, we present a new reconstruction of the temperature and precipitation change over the past two millennia based on grain size of a well-dated glacial lake sediment core in the central of southern Tianshan Mountains. The results show that the glacial lake catchment has experienced cold-wet climate conditions during the Dark Age Cold Period (∼300–600 AD; DACP) and the Little Ice Age (∼1300–1870 AD; LIA), whereas warm-dry conditions during the Medieval Warm Period (∼700–1270 AD; MWP). Integration of our results with those of previously published lake sediment records, stalagmite δ18O records, ice core net accumulation rates, tree-ring based temperature reconstructions, and mountain glacier activities suggest that there has a broadly similar hydroclimatic pattern over the HCA areas on centennial time scale during the past two millennia. Comparison between hydroclimatic pattern of the HCA and that of the ACA areas suggests a prevailing 'warm-dry and cold-wet' hydroclimatic pattern over the whole westerlies-dominated central Asia areas during the past two millennia. We argue that the position and intensity of the westerlies, which are closely related to the phase of the North Atlantic Oscillation (NAO), and the strength of the Siberian High pressure (SH), could have jointly modulated the late Holocene central Asia hydroclimatic changes.<br /
- âŠ