364 research outputs found

    Visualization and measurement of red blood cells flowing in microfluidic devices

    Get PDF
    Several experimental techniques were performed in the past years using in vitro environments, in an attempt to not only understand the blood flow behaviour in microcirculation but also develop microfluidic devices as an alternative clinical methodology to detect blood diseases. Hence, the visualization and measurement of red blood cells (RBCs) flowing in a microfluidic device are important to provide not only essential information about hydrodynamic characteristics of the blood but also vital information to diagnose the initial symptoms of diseases during clinical investigations. For instance, RBC rigidity has been correlated with myocardial infarction, diabetes mellitus, hypertension, and also other haematological disorders and diseases that affect RBC deformation more directly, such as, hereditary spherocytosis, sickle cell anaemia and malaria. Regarding a better understanding of the RBCs deformation and motion, we present in this paper a compilation of studies made in our research group, using several microfluidic devices with different microchannel geometries and fabrication techniques (i.e., soft-lithography, xurography and hybrids) that focus in the shear and extensional flow behaviour, either in healthy or chemically stiffed RBCs.The authors acknowledge the financial support provided by 2007 Global COE Program “Global Nano-Biomedical Engineering Education and Research Network”, Japan and grant-in-Aid for Science and Technology, PTDC/SAU-BEB/105650/2008, PTDC/EME-MFE/099109/2008, PTDC/SAUENB/116929/2010, EXPL/EMS-SIS/2215/2013, scholarship SFRH/BD/91192/2012 and scholarship SFRH/BD/89077/2012 from FCT (Science and Technology Foundation), COMPETE, QREN and European Union (FEDER). The authors are also very grateful to Dr. Mónica Oliveira (Strathclyde University), Professor Takuji Ishikawa and Professor Takami Yamaguchi (Tohoku University) for their suggestions and support to this research work

    Nanofilm Allotrope and Phase Transformation of Ultrathin Bi Film on Si(111)7X7

    Get PDF
    金æČąć€§ć­Šç†ć­ŠéƒšNanofilm allotrope and phase transformation of ultrathin Bi film on Si(111)-7 × 7 were analyzed using scanning tunneling microscopy and electron diffraction experiments. It was observed that this pseudocubic {012}-oriented allotrope is stable up to four atomic layers at room temperature. The entire volume of the film started to transform into a bulk single-crystal (001) phase, as the bulk contribution in the cohesion became dominant, above the critical thickness. It was proposed that the allotrope consists of black phosphorus-like puckered layers stabilized by saturating all the pz dangling bonds in the film, based on ab initio calculations

    Human red blood cell behaviour under homogeneous extensional flow in a hyperbolic-shaped microchannel

    Get PDF
    It is well known that certain pathological conditions result in a decrease of red blood cells (RBCs) deformability and subsequently can significantly alter the blood flow in microcirculation, which may block capillaries and cause ischemia in the tissues. Microfluidic systems able to obtain reliable quantitative measurements of RBC deformability hold the key to understand and diagnose RBC related diseases. In this work, a microfluidic system composed of a microchannel with a hyperbolic-shaped contraction followed by a sudden expansion is presented. We provide a detailed quantitative description of the degree of deformation of human RBCs under a controlled homogeneous extensional flow field. We measured the deformation index (DI) as well as the velocity of the RBCs travelling along the center line of the channel for four different flow rates and analyze the impact of the particle Reynolds number. The results show that human RBC deformation tends to reach a plateau value in the region of constant extensional rate, the value of which depends on the extension rate. Additionally, we observe that the presence of a sudden expansion downstream of the hyperbolic contraction modifies the spatial distribution of cells and substantially increases the cell free layer (CFL) downstream of the expansion plane similarly to what is seen in other expansion flows. Beyond a certain value of flow rate, there is only a weak effect of inlet flow rates on the enhancement of the downstream CFL. These in vitro experiments show the potential of using microfluidic systems with hyperbolic-shaped microchannels both for the separation of the RBCs from plasma and to assess changes in RBC deformability in physiological and pathological situations for clinical purposes. However, the selection of the geometry and the identification of the most suitable region to evaluate the changes on the RBC deformability under extensional flows are crucial if microfluidics is to be used as an in vitro clinical methodology to detect circulatory diseases

    Flow of red blood cells suspensions through hyperbolic microcontractions

    Get PDF
    The present study uses a hyperbolic microchannel with a low aspect ratio (AR) to investigate how the red blood cells (RBCs) deform under conditions of both extensional and shear induced flows. The deformability is presented by the degree of the deformation index (DI) of the flowing RBCs throughout the microchannel at its centerline. A suitable image analysis technique is used for semi-automatic measurements of average DIs, velocity and strain rate of the RBCs travelling in the regions of interest. The results reveal a strong deformation of RBCs under both extensional and shear stress dominated flow conditions

    Dry Bacterial Cellulose and Carboxymethyl Cellulose formulations with interfacial-active performance: processing conditions and redispersion

    Get PDF
    Dry or powdered formulations of food additives facilitate transportation, storage, preservation and handling. In this work, dry formulations of bacterial cellulose and carboxymethyl cellulose (BC:CMC), easily redispersible and preserving the functionality of the never-dried dispersions are reported. Different processing parameters and their effect on the materials properties were evaluated, namely: (i) wet-grinding of BC (Hand-blender, Microcut Head Impeller, High-pressure Homogenizer), (ii) drying of BC:CMC mixtures (fast drying at130 °C and slow drying at 80 °C) and subsequent (iii) comminution to different particle sizes. The dispersibility of the obtained BC:CMC powders was evaluated, and their functionality after redispersion was assessed by measuring the dynamic viscosity, the effect in oil/water interfacial tension (liquidliquid system) and the stabilization of cocoa in milk (solidliquid system). The size of BC fibre bundles was of paramount relevance to its stabilizing ability in multiphasic systems. A more extensive wet-grinding of the BC fibres was accompanied by a loss in the BC:CMC functionality, related to the increasingly smaller size of the BC bundles. Indeed, as the Dv (50) of the wet BC bundles was reduced from 1228 to 55 ”m, the BC:CMC viscosity profile dropped and the effect on interfacial tension decreased. This effect was observed both on the never-dried and dry BC:CMC formulations. On the other hand, the drying method did not play a major effect in the materials properties. In a benchmarking study, the BC:CMC formulations, at a low concentration (0.15%), had better stabilizing ability of the cocoa particles than several commercial cellulose products.Electronic supplementary material The online version of this article (https://doi.org/10.1007/s10570-020-03211-9) contains supplementary material, which is available to authorized users.This study was supported by FCT under the scope of the strategic funding of UID/BIO/04469/2019 unit and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020-Programa Operacional Regional do Norte. Daniela Martins also gratefully acknowledges FCT for the PhD scholarship, reference SFRH/BD/115917/2016.info:eu-repo/semantics/publishedVersio

    Adenosine Triphosphate (ATP) as a Metric of Microbial Biomass in Aquatic Systems: New Simplified Protocols, Laboratory Validation, and a Reflection on Data From the Literature

    Get PDF
    The use of adenosine triphosphate (ATP) as a universal biomass indicator is built on the premise that ATP concentration tracks biomass rather than the physiological condition of cells. However, reportedly high variability in ATP in response to environmental conditions is the main reason the method has not found widespread application. To test possible sources of this variability, we used the diatom Thalassiosira weissflogii as a model and manipulated its growth rate through nutrient limitation and through exposure to three different temperatures (15°C, 20°C, and 25°C). We simplified the ATP protocol with hot‐water or chemical extraction methods, modified a commercially available luciferin‐luciferase assay, and employed single‐photon counting in a scintillation counter, all of which increased sensitivity and throughput. Per‐cell ATP levels remained relatively constant despite changes in growth rates by approximately 10‐fold in the batch culture (i.e., nutrient limitation) experiments, and approximately 2‐fold in response to temperature. The re‐examination of related literature values revealed that average cellular ATP levels differed little among taxonomic groups of aquatic microbes, even at the domain level, and correlated well with bulk properties such as elemental carbon or nitrogen. Fulfilling multiple cellular functions in addition to being the universal energy currency requires ATP to be maintained in a millimolar concentration range. Consequently, ATP relates directly to live cytoplasm volume, while elemental carbon and nitrogen are constrained by an indeterminate pool of detrital material and intracellular storage compounds. The ATP‐biomass indicator is sensitive, economical, and can be readily standardized among laboratories and across environments

    Human Hepatitis B Virus Production in Avian Cells Is Characterized by Enhanced RNA Splicing and the Presence of Capsids Containing Shortened Genomes

    Get PDF
    Experimental studies on hepatitis B virus (HBV) replication are commonly done with human hepatoma cells to reflect the natural species and tissue tropism of the virus. However, HBV can also replicate, upon transfection of virus coding plasmids, in cells of other species. In such cross-species transfection experiments with chicken LMH hepatoma cells, we previously observed the formation of HBV genomes with aberrant electrophoretic mobility, in addition to the those DNA species commonly seen in human HepG2 hepatoma cells. Here, we report that these aberrant DNA forms are mainly due to excessive splicing of HBV pregenomic RNA and the abundant synthesis of spliced DNA products, equivalent to those also made in human cells, yet at much lower level. Mutation of the common splice acceptor site abolished splicing and in turn enhanced production of DNA from full-length pgRNA in transfected LMH cells. The absence of splicing made other DNA molecules visible, that were shortened due to the lack of sequences in the core protein coding region. Furthermore, there was nearly full-length DNA in the cytoplasm of LMH cells that was not protected in viral capsids. Remarkably, we have previously observed similar shortened genomes and non-protected viral DNA in human HepG2 cells, yet exclusively in the nucleus where uncoating and final release of viral genomes occurs. Hence, two effects reflecting capsid disassembly in the nucleus in human HepG2 cells are seen in the cytoplasm of chicken LMH cells

    Influence of mercury exposure on blood pressure, resting heart rate and heart rate variability in French Polynesians: a cross-sectional study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Populations which diet is rich in seafood are highly exposed to contaminants such as mercury, which could affect cardiovascular risk factors</p> <p>Objective</p> <p>To assess the associations between mercury and blood pressure (BP), resting heart rate (HR) and HR variability (HRV) among French Polynesians</p> <p>Methods</p> <p>Data were collected among 180 adults (≄ 18 years) and 101 teenagers (12-17 years). HRV was measured using a two-hour ambulatory electrocardiogram (Holter) and BP was measured using a standardized protocol. The association between mercury and HRV and BP parameters was studied using analysis of variance (ANOVA) and analysis of covariance (ANCOVA)</p> <p>Results</p> <p>Among teenagers, the high frequency (HF) decreased between the 2<sup>nd </sup>and 3<sup>rd </sup>tertile (380 vs. 204 ms<sup>2</sup>, p = 0.03) and a similar pattern was observed for the square root of the mean squared differences of successive R-R intervals (rMSSD) (43 vs. 30 ms, p = 0.005) after adjusting for confounders. In addition, the ratio low/high frequency (LF/HF) increased between the 2<sup>nd </sup>and 3<sup>rd </sup>tertile (2.3 vs. 3.0, p = 0.04). Among adults, the standard deviation of R-R intervals (SDNN) tended to decrease between the 1<sup>st </sup>and 2<sup>nd </sup>tertile (84 vs. 75 ms, p = 0.069) after adjusting for confounders. Furthermore, diastolic BP tended to increase between the 2<sup>nd </sup>and 3<sup>rd </sup>tertile (86 vs. 91 mm Hg, p = 0.09). No significant difference was observed in resting HR or pulse pressure (PP)</p> <p>Conclusions</p> <p>Mercury was associated with decreased HRV among French Polynesian teenagers while no significant association was observed with resting HR, BP, or PP among teenagers or adults</p

    Highly specific host-pathogen interactions influence Metarhizium brunneum blastospore virulence against Culex quinquefasciatus larvae

    Get PDF
    Entomopathogenic fungi are potential biological control agents of mosquitoes. Our group observed that not all mosquitoes were equally susceptible to fungal infection and observed significant differences in virulence of different spore types. Conidiospores and blastospores were tested against Culex quinquefasciatus larvae. Blastospores are normally considered more virulent than conidia as they form germ tubes and penetrate the host integument more rapidly than conidia. However, when tested against Cx. quinquefasciatus, blastospores were less virulent than conidia. This host-fungus interaction was studied by optical, electron and atomic force microscopy (AFM). Furthermore, host immune responses and specific gene expression were investigated. Metarhizium brunneum (formerly M. anisopliae) ARSEF 4556 blastospores did not readily adhere to Culex larval integument and the main route of infection was through the gut. Adhesion forces between blastospores and Culex cuticle were significantly lower than for other insects. Larvae challenged with blastospores showed enhanced immune responses, with increased levels of phenoloxidase, glutathione-S-transferase, esterase, superoxide dismutase and lipid peroxidase activity. Interestingly, M. brunneum pathogenicity/stress-related genes were all down-regulated in blastospores exposed to Culex. Conversely, when conidia were exposed to Culex, the pathogenicity genes involved in adhesion or cuticle degradation were up-regulated. Delayed host mortality following blastospore infection of Culex was probably due to lower adhesion rates of blastospores to the cuticle and enhanced host immune responses deployed to counter infection. The results here show that subtle differences in host-pathogen interactions can be responsible for significant changes in virulence when comparing mosquito species, having important consequences for biological control strategies and the understanding of pathogenicity processes
    • 

    corecore