The Application of Six Sigma Approach in Construction : A Case Study for Improving Precast Production Management

Six Sigma has been developed in the 1980s at Motorola; this approach is now extensively ap-plied in the manufacturing and other industries for improving productivity and profitability. In Taiwan, after 921 earthquake in 1999 and huge floods in 2009, the construction industry have realized that the importance of construction quality and harmony with the environment. The Six Sigma takes attention to the quality that customers concerned and also contribute to achieving efficiency and reduce costs. By the way, the thinking of Six Sigma approach should also be applied in the construction industry. Therefore, this paper will take the Six Sigma approach into the practice of precast construction management

Seismic behavior of pile in liquefiable soil ground by centrifuge shaking table tests

Dramatic failure of pile foundations caused by the soil liquefaction was founded and leading to many studies on the seismic behavior of pile. The failures were often accompanied with settlement, lateral displacement and tilting of superstructures. Therefore soil-structure interaction effects must be properly considered in the design of pile. Two centrifuge models were conducted by shaking table at an acceleration field of 80 g. The purpose of this study was to investigate the seismic response of piles attached with different tip mass and embedded in liquefied or non-liquefied deposits. From the results, it was found that the maximum bending moment of pile occurs at the depth of 4 m and 5 m for dry sand and saturated sand models, respectively. The more tip mass leads to the more permanent lateral displacement and the more residual bending moment

Toxicity assessments of chalcone and some synthetic chalcone analogues in a zebrafish model

[[abstract]]The aim of this study was to investigate the in vivo toxicities of some novel synthetic chalcones. Chalcone and four chalcone analogues 1a–d were evaluated using zebrafish embryos following antibody staining to visualize their morphological changes and muscle fiber alignment. Results showed that embryos treated with 3'-hydroxychalcone (compound 1b) displayed a high percentage of muscle defects (96.6%), especially myofibril misalignment. Ultrastructural analysis revealed that compound 1b-treated embryos displayed many muscle defect phenotypes, including breakage and collapse of myofibrils, reduced cell numbers, and disorganized thick (myosin) and thin (actin) filaments. Taken together, our results provide in vivo evidence of the myotoxic effects of the synthesized chalcone analogues on developing zebrafish embryos.[[incitationindex]]SCI[[booktype]]電子

Evaluation of the Effect of Laser Acupuncture and Cupping with Ryodoraku and Visual Analog Scale on Low Back Pain

The purpose of this study was to evaluate the effect of laser acupuncture (LA) and soft cupping on low back pain. In this study, the subjects were randomly assigned to two groups: active group (real LA and soft cupping) and placebo group (sham laser and soft cupping). Visual analog scale (VAS) and Ryodoraku were used to evaluate the effect of treatment on low back pain in this trial. Laser, 40 mW, wavelength 808 nm, pulse rate 20 Hz, was used to irradiate Weizhong (BL40) and Ashi acupoints for 10 minutes. And the Ryodoraku values were measured 2 times, that is, before and 15 minutes after treatment. The results show that there were significant difference between the first day baseline and the fifth day treatment in VAS in the two groups. Therefore, LA combined with soft cupping or only soft cupping was effective on low back pain. However, the Ryodoraku values of Bladder Meridian of the placebo group have been decreased apparently, and didn’t come back to their original values. It means that “cupping” plays the role of “leak or purge” in traditional Chinese medicine (TCM). On the other hand, the Ryodoraku values of Bladder Meridian of the active group have been turned back to almost their original values; “mend or reinforcing” effect is attributed to the laser radiation

Sequence Variants of ADIPOQ

Diabetes is a serious global health problem. Large-scale genome-wide association studies identified loci for type 2 diabetes mellitus (T2DM), including adiponectin (ADIPOQ) gene and transcription factor 7-like 2 (TCF7L2), but few studies clarified the effect of genetic polymorphisms of ADIPOQ and TCF7L2 on risk of T2DM. We attempted to elucidate association between T2DM and polymorphic variations of both in Taiwan’s Chinese Han population, with our retrospective case-control study genotyping single nucleotide polymorphisms (SNPs) in ADIPOQ and TCF7L2 genes both in 149 T2DM patients and in 139 healthy controls from Taiwan. Statistical analysis gauged association of these polymorphisms with risk of T2DM to show ADIPOQ rs1501299 polymorphism variations strongly correlated with T2DM risk (P=0.042), with rs2241766 polymorphism being not associated with T2DM (P=0.967). However, both polymorphisms rs7903146 and rs12255372 of TCF7L2 were rarely detected in Taiwanese people. This study avers that ADIPOQ rs1501299 polymorphism contributes to risk of T2DM in the Taiwanese population

Non-invasive and transdermal measurement of blood uric acid level in human by electroporation and reverse iontophoresis

The aim of this study was to find out the optimum combination of electroporation (EP) and reverse iontophoresis (RI) on noninvasive and transdermal determination of blood uric acid level in humans. EP is the use of high-voltage electric pulse to create nano-channels on the stratum corneum, temporarily and reversibly. RI is the use of small current to facilitate both charged and uncharged molecule transportation across the skin. It is believed that the combination of these two techniques has additional benefits on the molecules’ extraction across the human skin. In vitro studies using porcine skin and diffusion cell have indicated that the optimum mode for transdermal uric acid extraction is the combination of RI with symmetrical biphasic direct current (current density = 0.3 mA/cm2; phase duration = 180 s) and EP with 10 pulses per second (voltage = 100 V/cm2; pulse width = 1 ms). This optimum mode was applied to six human subjects. Uric acid was successfully extracted through the subjects’ skin into the collection solution. A good correlation (r2 = 0.88) between the subject’s blood uric acid level and uric acid concentrations in collection solutions was observed. The results suggest that it may be possible to noninvasively and transdermally determine blood uric acid levels