Air entrainment and granular bubbles produced by an impinging jet of grains into water

A jet of water entering into a pool of the same liquid can generate air entrainment and form bubbles that rapidly raise to the surface and disintegrate. Here we report the equivalent phenomenon produced by a plunging dry granular jet, so far unexplored. For grains smaller than a critical size, the granular jet entering into the pool produces air entrainment that leads to bubbles formation. The bubbles formed are covered by a shell of grains attached to the bubble air-water interface due to capillary-induced cohesion. In contrast to classical air bubbles, these "granular bubbles" are stable over time because the granular shell prevents coalescence and keeps the air encapsulated either if the bubbles rise to the surface or sink to the bottom of the pool, which is determined by the competition of the buoyant force and the weight of the assembly. Experimentally, we show how the bubble size and volume of entrained air depend on the grain size, liquid properties and jet impact velocity.Comment: 5 pages, 4 figure

Visser's Massive Gravity Bimetric Theory Revisited

A massive gravity theory was proposed by Visser in the late nineties. This theory, based on a backgroung metric $b_{\alpha \beta}$ and on an usual dynamical metric $g_{\alpha \beta}$ has the advantage of being free of ghosts as well as discontinuities present in other massive theories proposed in the past. In the present investigation, the equations of Visser's theory are revisited with a particular care on the related conservation laws.\ It will be shown that a multiplicative factor is missing in the graviton tensor originally derived by Visser, which has no incidence on the weak field approach but becomes important in the strong field regime when, for instance, cosmological applications are considered. In this case, contrary to some previous claims found in the literature, we conclude that a non-static background metric is required in order to obtain a solution able to mimic the $\Lambda$CDM cosmology.Comment: 10 pages - Accepted for publication in Physical Review

Understanding Bowtie Nanoantennas Excited by a Localized Emitter

A full analytical description of a bowtie nanoantenna excited by a localized emitter is presented using the transformation electromagnetic technique. By applying the conformal mapping, the bowtie nanoantenna is transformed into a periodic multi-parallel plate transmission line problem which can be easily evaluated analytically providing physical insight of the coupling between the dipole nanoemitter and the bowtie nanoantenna. The non-radiative Purcell enhancement spectrum is evaluated both analytically and numerically for different lengths, arm angles and metals, demonstrating a good agreement between both approaches. The method here presented fills the gap of the design techniques for optical nanoantennas

First results from dark matter search experiment with LiF bolometer at Kamioka Underground Laboratory

Tokyo group has performed first underground dark matter search experiment in 2001 through 2002 at Kamioka Observatory(2700m.w.e). The detector is eight LiF bolometers with total mass 168g aiming for the direct detection of WIMPs via spin-dependent interaction. With a total exposure of 4.1 kg days, we derived the limits in the a_p-a_n (WIMP-nucleon couplings) plane and excluded a large part of the parameter space allowed by the UKDMC experiment.Comment: 15 pages, 5 figure

Coulomb interaction effects on the electronic structure of radial polarized excitons in nanorings

The electronic structure of radially polarized excitons in structured nanorings is analyzed, with emphasis in the ground-state properties and their dependence under applied magnetic fields perpendicular to the ring plane. The electron-hole Coulomb attraction has been treated rigorously, through numerical diagonalization of the full exciton Hamiltonian in the non-interacting electron-hole pairs basis. Depending on the relative weight of the kinetic energy and Coulomb contributions, the ground-state of polarized excitons has "extended" or "localized" features. In the first case, corresponding to small rings dominated by the kinetic energy, the ground-state shows Aharonov-Bohm (AB) oscillations due to the individual orbits of the building particles of the exciton. In the localized regime, corresponding to large rings dominated by the Coulomb interaction, the only remaining AB oscillations are due to the magnetic flux trapped between the electron and hole orbits. This dependence of the exciton, a neutral excitation, on the flux difference confirms this feature as a signature of Coulomb dominated polarized excitons. Analytical approximations are provided in both regimens, which accurate reproduce the numerical results.Comment: 9 pages, including 6 figure

Scaling Properties of the Giant Dipole Resonance Width in Hot Rotating nuclei

We study the systematics of the giant dipole resonance width $\Gamma$ in hot rotating nuclei as a function of temperature $T$, spin $J$ and mass $A$. We compare available experimental results with theoretical calculations that include thermal shape fluctuations in nuclei ranging from A=45 to A=208. Using the appropriate scaled variables, we find a simple phenomenological function $\Gamma(A,T,J)$ which approximates the global behavior of the giant dipole resonance width in the liquid drop model. We reanalyze recent experimental and theoretical results for the resonance width in Sn isotopes and $^{208}$Pb.Comment: LaTeX, 4 pages with 4 figures (to appear in Phys. Rev. Lett.

Estudio del comportamiento mecánico del hormigón de ultra- altas prestaciones (UHPC) reforzado con fibras híbridas y con consumo reducido de cemento

This article evaluated mechanical behavior of ultra-high performance concrete (UHPC) reinforced with hybrid steel and polypropylene fibers, with cement consumption of 250 kg/m³ and application of confining pressure in fresh state. The consistency of the mixture was analyzed, as well as mechanical properties of compressive strength, flexural strength and toughness. The percentages of hybridization were 50 to 100% of metal fibers and 0 to 50% of polypropylene fibers. Results showed that the compressive strength of the composite was 180 MPa (26100 psi), despite its low cement consumption of 250 kg/m³ (2.08 lb/gal), with 80% steel fibers and 20% polypropylene fibers. The combination of fibers increased the mixture’s toughness. For the composition with 80% steel fibers and 20% polypropylene fibers, the strength for large deformations increased by 191% compared with the mixture with 100% steel fibers, pointing out the benefits of hybridization.En este trabajo se evaluó el comportamiento mecánico de los hormigones de ultra-altas prestaciones (UHPC) reforzados con fibras híbridas de acero y polipropileno, con un consumo de cemento de 250 kg/m3 y aplicando una presión de confinamiento en su estado fresco. Se analizó la consistencia de la mezcla, las propiedades mecánicas de las resistencias a la compresión y flexión, así como la tenacidad. Se usaron porcentajes de hibridación del 50 al 100% de fibras metálicas y de 0 al 50% de fibras de polipropileno. Los resultados muestran que la resistencia a la compresión del compuesto fue de 180 MPa (26.100 psi), a pesar de su bajo consumo de cemento, de 250 kg/m³ (2,08 lb/gal), con 80% de fibras de acero y 20% de fibras de polipropileno. La combinación de fibras incrementó la tenacidad de la mezcla. Para esta misma composición, la resistencia para las grandes deformaciones aumentó en un 191% en comparación con la mezcla que contenía un 100% de fibras de acero, demostrando así los beneficios de la hibridación

Gutenberg Richter and Characteristic Earthquake Behavior in Simple Mean-Field Models of Heterogeneous Faults

The statistics of earthquakes in a heterogeneous fault zone is studied analytically and numerically in the mean field version of a model for a segmented fault system in a three-dimensional elastic solid. The studies focus on the interplay between the roles of disorder, dynamical effects, and driving mechanisms. A two-parameter phase diagram is found, spanned by the amplitude of dynamical weakening (or ``overshoot'') effects (epsilon) and the normal distance (L) of the driving forces from the fault. In general, small epsilon and small L are found to produce Gutenberg-Richter type power law statistics with an exponential cutoff, while large epsilon and large L lead to a distribution of small events combined with characteristic system-size events. In a certain parameter regime the behavior is bistable, with transitions back and forth from one phase to the other on time scales determined by the fault size and other model parameters. The implications for realistic earthquake statistics are discussed.Comment: 21 pages, RevTex, 6 figures (ps, eps

Biotechnologies and bioinspired materials for the construction industry : an overview

Published online: 16 Oct 2013Looking back to less than three centuries of industrialization, responsible for alarming levels of pollution and consumption of non-renewable resources that has led to the exhaustion of the earth’s capacity, the humankind only now begins to grasp the overwhelming potential of natural systems. During almost 40 million centuries, Nature has developed materials and processes with optimal performance which are totally biodegradable. Analysis of bioinspired materials requires the knowledge of both biological and engineering principles which are being a part of a large research area termed biotechnology. This hot area is one of the six strategic Key Enabling Technologies that will be funded under the EU Framework Programme Horizon 2020. This paper reviews the current knowledge on the potential of this emerging field, particularly in the development of materials and technologies for the construction industry. It covers the use of bacteria for enhancing concrete durability and for soil stabilization. It also covers bioinspired tough composite materials, bioinspired adhesives and coatings, and self-cleaning materials. Incorporation of biology basics in the civil engineering curriculum would ease the communication between biologists and civil engineers, helping to foster research on biotechnologies and bioinspired materials for the construction industry

Epidemic Incidence in Correlated Complex Networks

We introduce a numerical method to solve epidemic models on the underlying topology of complex networks. The approach exploits the mean-field like rate equations describing the system and allows to work with very large system sizes, where Monte Carlo simulations are useless due to memory needs. We then study the SIR epidemiological model on assortative networks, providing numerical evidence of the absence of epidemic thresholds. Besides, the time profiles of the populations are analyzed. Finally, we stress that the present method would allow to solve arbitrary epidemic-like models provided that they can be described by mean-field rate equations.Comment: 5 pages, 4 figures. Final version published in PR