Hall coefficient and Hc2 in underdoped LaFeAsO0.95F0.05

The electrical resistivity and Hall coefficient of LaFeAsO0.95F0.05 polycrystalline samples were measured in pulsed magnetic fields up to m0H = 60 T from room temperature to 1.5 K. The resistance of the normal state shows a negative temperature coefficient (dr/dT < 0) below 70 K for this composition, indicating insulating ground state in underdoped LaFeAsO system in contrast to heavily doped compound. The charge carrier density obtained from Hall effect can be described as constant plus a thermally activated term with an energy gap DE = 630 K. Upper critical field, Hc2, estimated from resistivity measurements, exceeds 75 T with zero-field Tc = 26.3 K, suggesting an unconventional nature for superconductivity.Comment: 12 pages and 4 figure

Radio Frequency Electrical Resistance Measurement under Destructive Pulsed Magnetic Fields

We developed a resistance measurement using radio frequency reflection to investigate the electrical transport characteristics under destructive pulsed magnetic fields above 100 T. A homemade flexible printed circuit for a sample stage reduced the noise caused by the induced voltage from the pulsed magnetic fields, improving the accuracy of the measurements of the reflected waves. From the obtained reflectance data, the absolute value of the magnetoresistance was successfully determined by using a phase analysis with admittance charts. These developments enable more accurate and comprehensive measurements of electrical resistance in pulsed magnetic fields.Comment: 7 pages, 5 figure

Upper critical field and thermally activated flux flow in single crystalline Tl0.58_{0.58}Rb0.42_{0.42}Fe1.72_{1.72}Se2_2

The upper critical field $\mu_0H_{c2}(T_c)$ of Tl$_{0.58}$Rb$_{0.42}$Fe$_{1.72}$Se$_2$ single crystals has been determined by means of measuring the electrical resistivity in both a pulsed magnetic field ($\sim$60T) and a DC magnetic field ($\sim$14T). It is found that $H_{c2}$ linearly increases with decreasing temperature for $\textbf{H}$$\parallel$$c$, reaching $\mu_0H_{c2}^{\textbf{H}\parallel c}(0\textrm{K})\simeq60$ T. On the other hand, a larger $\mu_0H_{c2}(0\textrm{K})$ with a strong convex curvature is observed for $\textbf{H}$$\perp$$c$ ($\mu_0H_{c2}^{\textbf{H}\perp c}$(18K)$\simeq$60T). This compound shows a moderate anisotropy of the upper critical field around $T_c$, but decreases with decreasing temperature. Analysis of the upper critical field based on the Werthamer-Helfand-Hohenberg (WHH) method indicates that $\mu_0H_{c2}(0\textrm{K})$ is orbitally limited for $\textbf{H}$$\parallel$$c$, but the effect of spin paramagnetism may play an important role on the pair breaking for $\textbf{H}$$\perp$$c$. All these experimental observations remarkably resemble those of the iron pnictide superconductors, suggesting a unified scenario for the iron-based superconductors. Moreover, the superconducting transition is significantly broadened upon applying a magnetic field, indicating strong thermal fluctuation effects in the superconducting state of Tl$_{0.58}$Rb$_{0.42}$Fe$_{1.72}$Se$_2$. The derived thermal activation energy for vortex motion is compatible with those of the 1111-type iron pnictides.Comment: 7 pages, 6 figure

A Start-Timing Detector for the Collider Experiment PHENIX at RHIC-BNL

We describe a start-timing detector for the PHENIX experiment at the relativistic heavy-ion collider RHIC. The role of the detector is to detect a nuclear collision, provide precise time information with an accuracy of 50ps, and determine the collision point along the beam direction with a resolution of a few cm. Technical challenges are that the detector must be operational in a wide particle-multiplicity range in a high radiation environment and a strong magnetic field. We present the performance of the prototype and discuss the final design of the detector.Comment: 12 pages, LaTeX, 9 gif and 4 ps figures. Submitted to NIM

Weak anisotropy of the superconducting upper critical field in Fe1.11Te0.6Se0.4 single crystals

We have determined the resistive upper critical field Hc2 for single crystals of the superconductor Fe1.11Te0.6Se0.4 using pulsed magnetic fields of up to 60T. A rather high zero-temperature upper critical field of mu0Hc2(0) approx 47T is obtained, in spite of the relatively low superconducting transition temperature (Tc approx 14K). Moreover, Hc2 follows an unusual temperature dependence, becoming almost independent of the magnetic field orientation as the temperature T=0. We suggest that the isotropic superconductivity in Fe1.11Te0.6Se0.4 is a consequence of its three-dimensional Fermi-surface topology. An analogous result was obtained for (Ba,K)Fe2As2, indicating that all layered iron-based superconductors exhibit generic behavior that is significantly different from that of the high-Tc cuprates.Comment: 4 pages, 4 figures, submit to PR