Characterization and Separation Performance of a Novel Polyethersulfone Membrane Blended with Acacia Gum

Novel polyethersulfone (PES) membranes blended with 0.1–3.0 wt. % of Acacia gum (AG) as a pore-former and antifouling agent were fabricated using phase inversion technique. The effect of AG on the pore-size, porosity, surface morphology, surface charge, hydrophilicity, and mechanical properties of PES/AG membranes was studied by scanning electron microscopy (SEM), Raman spectroscopy, contact angle and zeta potential measurements. The antifouling -properties of PES/AG membranes were evaluated using Escherichia coli bacteria and bovine serum albumine (BSA). The use of AG as an additive to PES membranes was found to increase the surface charge, hydrophilicity (by 20%), porosity (by 77%) and permeate flux (by about 130%). Moreover, PES/AG membranes demonstrated higher antifouling and tensile stress (by 31%) when compared to pure PES membranes. It was shown that the prepared PES/AG membranes efficiently removed lead ions from aqueous solutions. Both the sieving mechanism of the membrane and chelation of lead with AG macromolecules incorporated in the membrane matrix contributed to lead removal. The obtained results indicated that AG can be used as a novel pore-former, hydrophilizing and antifouling agent, as well as an enhancer to the mechanical and rejection properties of the PES membranes

Intervention planning and modification of the BUMP intervention: a digital intervention for the early detection of raised blood pressure in pregnancy

Background: Hypertensive disorders in pregnancy, particularly pre-eclampsia, pose a substantial health risk for both maternal and foetal outcomes. The BUMP (Blood Pressure Self-Monitoring in Pregnancy) interventions are being tested in a trial. They aim to facilitate the early detection of raised blood pressure through self-monitoring. This article outlines how the self-monitoring interventions in the BUMP trial were developed and modified using the person-based approach to promote engagement and adherence. Methods: Key behavioural challenges associated with blood pressure self-monitoring in pregnancy were identified through synthesising qualitative pilot data and existing evidence, which informed guiding principles for the development process. Social cognitive theory was identified as an appropriate theoretical framework. A testable logic model was developed to illustrate the hypothesised processes of change associated with the intervention. Iterative qualitative feedback from women and staff informed modifications to the participant materials. Results: The evidence synthesis suggested women face challenges integrating self-monitoring into their lives and that adherence is challenging at certain time points in pregnancy (for example, starting maternity leave). Intervention modification included strategies to address adherence but also focussed on modifying outcome expectancies, by providing messages explaining pre-eclampsia and outlining the potential benefits of self-monitoring. Conclusions: With an in-depth understanding of the target population, several methods and approaches to plan and develop interventions specifically relevant to pregnant women were successfully integrated, to address barriers to behaviour change while ensuring they are easy to engage with, persuasive and acceptable

Purification of a lectin from Cratylia mollis crude extract seed by a single step PEG/phosphate aqueous two-phase system

The partitioning and purification of lectins from the crude extract of Cratylia mollis seeds (Cramoll 1,4) was investigated in aqueous two-phase systems (ATPS). A factorial design model (24) was used to evaluate the influence of polyethylene glycol (PEG) molar mass (15008000g/mol), PEG concentration (12.517.5% w/w), phosphate (1015% w/w) concentration, and pH (68) on the differential partitioning, purification factor, and yield of the lectin. Polymer and salt concentration were the most important variables affecting partition of lectin and used to find optimum purification factor by experimental BoxBehnken design together with the response surface methodology (RSM). ATPS showed best conditions composed by 13.9% PEG1500, 15.3% phosphate buffer at pH 6, which ensured purification factor of 4.70. Sodium dodecyl sulfatepolyacrylamide gel electrophoresis showed a single band of protein with 26.1kDa. Furthermore, results demonstrated a thermostable lectin presenting activity until 60°C and lost hemagglutinating activity at 80°C. According to the obtained data it can be inferred that the ATPS optimization using RSM approach can be applied for recovery and purification of lectins.We are grateful to the following bodies for the grants awarded: CAPES (Coordination for the Improvement of Level Personnel Superior); FACEPE (Pernambuco Science and Technology Foundation): Researcher's scholarship grant: BFP-0017-5.05/18 CNPq (National Council for Scientific Development and Technological) process: 427153/2016-6 and we also thank the reviewers for their valuable comments and suggestions as these helped us to improve the manuscript.info:eu-repo/semantics/publishedVersio

Petrographical and geochemical evidences for paragenetic sequence interpretation of diagenesis in mixed siliciclastic–carbonate sediments: Mozduran Formation (Upper Jurassic), south of Agh-Darband, NE Iran

The Upper Jurassic Mozduran Formation with a thickness of 420 m at the type locality is the most important gas-bearing reservoir in NE Iran. It is mainly composed of limestone, dolostone with shale and gypsum interbeds that grade into coarser siliciclastics in the easternmost part of the basin. Eight stratigraphic sections were studied in detail in south of the Agh-Darband area. These analyses suggest that four carbonate facies associations and three siliciclastic lithofacies were deposited in shallow marine to shoreline environments, respectively. Cementation, compaction, dissolution, micritization, neomorphism, hematitization, dolomitization and fracturing are diagenetic processes that affected these sediments.Stable isotope variations of δ18O and δ13C in carbonate rocks show two different trends. High depletion of δ18O and low variation of δ13C probably reflect increasing temperatures during burial diagenesis, while the higher depletion in carbon isotope values with low variations in oxygen isotopes are related to fresh water flushing during meteoric diagenesis. Negative values of carbon isotopes may have also resulted from organic matter alteration during penetration of meteoric water. Fe and Mn enrichment with depletion of δ18O also supports the contention that alteration associated with higher depletion in carbon isotope values with low variations in oxygen isotopes took place during meteoric diagenesis. The presence of bright luminescence indicates redox conditions during precipitation of calcite cement

Urban impacts on air temperature and precipitation over The Netherlands

The detection of changes in the weather of urban areas is an important issue for understanding the impact of weather on human lives. Five years of basic weather observations (2011−2015) from automatic and amateur networks across The Netherlands were used to investigate the urban effects on meteorological parameters with a focus on temperature (e.g. urban heat island [UHI]) and precipitation. Representative stations were selected based on metadata and a set of criteria for data quality control. An hourly analysis indicates that UHIs are a nocturnal phenomenon in The Netherlands and are more prominent after sunset, when they exceed 2°C. A seasonal analysis shows that UHIs occur in all seasons during the year, with the most significant UHI occurring in the summer. Furthermore, the differences in the precipitation of urban and rural areas were shown to be greatest after sunrise during the day. The maximum hourly UHI and hourly precipitation distributions were analyzed using a generalized extreme value model. The occurrences of maximum precipitation are likely to be more frequent at urban stations than at the nearby rural stations. Additionally, the distinct seasonal cycle of precipitation that is dependent on the UHI demonstrates that the maximum UHI and precipitation occurred in the summer. Our results indicate that the UHI and precipitation enhancements in Dutch urban residential areas, as obtained from the data of weather amateurs, are in agreement with the results presented in the literature, and that 7% more precipitation occurs in cities than in rural areas

Detecting the effect of urban land use on extreme precipitation in the Netherlands

A notable increase in heavy precipitation has been observed over the Netherlands in recent decades. The aim of this study was to assess the influences of urban land use on these extreme precipitation patterns. Significant differences between an earlier multi-decadal period and a recent period were found in the Netherlands between 1961 and 2014. The significant changes in different indices indicate that severe precipitation events were not distributed homogeneously across the study area. The precipitation probability and distribution were assessed using the block maxima approach by comparing observations from urban and rural areas at different timescales. The possible effects of land use on extreme precipitation were assessed by quantifying the differences between urban and rural rain gauge stations according to the spatial gridding method. This study shows that urban land use may have affected the extreme precipitation patterns across the Netherlands. The data from all the categorized stations show that urban areas receive more intense extreme precipitation than do rural areas. Relative to other areas in the Netherlands, the urban areas in the western populated regions of the country exhibit prominent urban land use influences on the extreme precipitation patterns