5,179 research outputs found
Acetylene terminated matrix resins
The synthesis of resins with terminal acetylene groups has provided a promising technology to yield high performance structural materials. Because these resins cure through an addition reaction, no volatile by-products are produced during the processing. The cured products have high thermal stability and good properties retention after exposure to humidity. Resins with a wide variety of different chemical structures between the terminal acetylene groups are synthesized and their mechanical properties studied. The ability of the acetylene cured polymers to give good mechanical properties is demonstrated by the resins with quinoxaline structures. Processibility of these resins can be manipulated by varying the chain length between the acetylene groups or by blending in different amounts of reactive deluents. Processing conditions similar to the state-of-the-art epoxy can be attained by using backbone structures like ether-sulfone or bis-phenol-A. The wide range of mechanical properties and processing conditions attainable by this class of resins should allow them to be used in a wide variety of applications
Clonal analysis of a human antibody response. Quantitation of precursors of antibody-producing cells and generation and characterization of monoclonal IgM, IgG, and IgA to rabies virus.
We quantitated and characterized the changes in the human B cell repertoire, at the clonal level, before and after immunization with rabies virus. Moreover, we generated 10 monoclonal cell lines producing IgM, IgG, and IgA antibodies to the virus. We found that in healthy subjects, not previously exposed to the virus, nearly 2% of the circulating B lymphocytes were committed to the production of antibodies that bound the virus. These B cells expressed the surface CD5 molecule. The antibodies they produced were polyreactive IgM that displayed a relatively low affinity for the virus components (Kd, 1.0-2.4 x 10(-6) g/microliters). After immunization, different anti-virus (IgG and IgA) antibody-producing cells consistently appeared in the circulation and increased from less than 0.005% to greater than 10% of the total B cells committed to the production of IgG and IgA, respectively. Most of such B cells do not express CD5 and produce monoreactive antibodies of high affinity for rabies virus (Kd, 6.5 x 10(-9) to 1.2 x 10(-10) g/microliters). One of these IgG mAbs efficiently neutralized rabies virus in vitro and in vivo, as detailed elsewhere (Dietzschold, B., P. Casali, Y. Ueki, M. Gore, C. E. Rupprecht, A. L. Notkins, and H. Koprowski, manuscript submitted for publication). Hybridization experiments using probes specific for the different human V gene segment families revealed that cell precursors producing low affinity IgM binding to rabies virus utilized a restricted number of VH gene segments (i.e., only members of the VHIIIb subfamily), whereas cell precursors producing high affinity IgG and IgA to rabies virus utilized an assortment of different VH gene segments (i.e., members of the VHI, VHIII, VHIV, and VHVI families and VHIIIb subfamily). In conclusion, our studies show that EBV transformation in conjunction with limiting dilution technology and somatic cell hybridization techniques are useful methods for quantitating, at the B cell clonal level, the human antibody response to foreign Ags and for generating human mAbs of predetermined specificity and high affinity
A Quadratic Programming Approach to Quasi-Static Whole-Body Manipulation
This paper introduces a local motion planning method for robotic systems with manipulating limbs, moving bases (legged or wheeled), and stance stability constraints arising from the presence of gravity. We formulate the problem of selecting local motions as a linearly constrained quadratic program (QP), that can be solved efficiently. The solution to this QP is a tuple of locally optimal joint velocities. By using these velocities to step towards a goal, both a path and an inverse-kinematic solution to the goal are obtained. This formulation can be used directly for real-time control, or as a local motion planner to connect waypoints. This method is particularly useful for high-degree-of-freedom mobile robotic systems, as the QP solution scales well with the number of joints. We also show how a number of practically important geometric constraints (collision avoidance, mechanism self-collision avoidance, gaze direction, etc.) can be readily incorporated into either the constraint or objective parts of the formulation. Additionally, motion of the base, a particular joint, or a particular link can be encouraged/discouraged as desired. We summarize the important kinematic variables of the formulation, including the stance Jacobian, the reach Jacobian, and a center of mass Jacobian. The method is easily extended to provide sparse solutions, where the fewest number of joints are moved, by iteration using Tibshirani’s method to accommodate an l_1 regularizer. The approach is validated and demonstrated on SURROGATE, a mobile robot with a TALON base, a 7 DOF serial-revolute torso, and two 7 DOF modular arms developed at JPL/Caltech
Coherent States and Modified de Broglie-Bohm Complex Quantum Trajectories
This paper examines the nature of classical correspondence in the case of
coherent states at the level of quantum trajectories. We first show that for a
harmonic oscillator, the coherent state complex quantum trajectories and the
complex classical trajectories are identical to each other. This congruence in
the complex plane, not restricted to high quantum numbers alone, illustrates
that the harmonic oscillator in a coherent state executes classical motion. The
quantum trajectories are those conceived in a modified de Broglie-Bohm scheme
and we note that identical classical and quantum trajectories for coherent
states are obtained only in the present approach. The study is extended to
Gazeau-Klauder and SUSY quantum mechanics-based coherent states of a particle
in an infinite potential well and that in a symmetric Poschl-Teller (PT)
potential by solving for the trajectories numerically. For the coherent state
of the infinite potential well, almost identical classical and quantum
trajectories are obtained whereas for the PT potential, though classical
trajectories are not regained, a periodic motion results as t --> \infty.Comment: More example
CoWBP capping barrier layer for sub 90 nm Cu interconnects
Abstract Electroless cobalt films have been obtained by deposition using a plating bath containing two reducing agents: dimethylamineborane (DMAB) and sodium hypophosphite. This formulation allows spontaneous activation on copper followed by auto catalytic electroless plating. CoWBP and CoBP films are proposed as diffusion barriers and encapsulation layers, for copper lines and via contacts for ULSI interconnect applications. The crystalline structure, chemical composition and oxidation states of the elements were studied, as well as the electrical resistivity, topography and morphology of the films. The film composition was characterized as a function of the solution composition; the barrier properties of the films were tested and an oxidation resistance study was conducted. The films were characterized and the results show that they can be applied as capping layers for ULSI copper metallization
An AC susceptometer for the characterization of large, bulk superconducting samples
The main purpose of this work was to design, develop and construct a simple,
low-cost AC susceptometer to measure large, bulk superconducting samples (up to
32 mm in diameter) in the temperature range 78-120 K. The design incorporates a
double heating system that enables a high heating rate (25 K/hour) while
maintaining a small temperature gradient (< 0.2 K) across the sample. The
apparatus can be calibrated precisely using a copper coil connected in series
with the primary coil. The system has been used successfully to measure the
temperature dependence of the AC magnetic properties of entire RE-Ba-Cu-O
[(RE)BCO] bulk superconducting domains. A typical AC susceptibility measurement
run from 78 K to 95 K takes about 2 hours, with excellent temperature
resolution (temperature step ~ 4 mK) around the critical temperature, in
particular.Comment: 25 pages, 7 figures. Accepted for publication in Measurement Science
and Technolog
Implementation of an Optimal First-Order Method for Strongly Convex Total Variation Regularization
We present a practical implementation of an optimal first-order method, due
to Nesterov, for large-scale total variation regularization in tomographic
reconstruction, image deblurring, etc. The algorithm applies to -strongly
convex objective functions with -Lipschitz continuous gradient. In the
framework of Nesterov both and are assumed known -- an assumption
that is seldom satisfied in practice. We propose to incorporate mechanisms to
estimate locally sufficient and during the iterations. The mechanisms
also allow for the application to non-strongly convex functions. We discuss the
iteration complexity of several first-order methods, including the proposed
algorithm, and we use a 3D tomography problem to compare the performance of
these methods. The results show that for ill-conditioned problems solved to
high accuracy, the proposed method significantly outperforms state-of-the-art
first-order methods, as also suggested by theoretical results.Comment: 23 pages, 4 figure
- …