187 research outputs found
CDKN2B Upregulation Prevents Teratoma Formation in Multipotent Fibromodulin-Reprogrammed Cells
Tumorigenicity is a well-documented risk to overcome for pluripotent or multipotent cell applications in regenerative medicine. To address the emerging demand for safe cell sources in tissue regeneration, we established a novel, protein-based reprogramming method that does not require genome integration or oncogene activation to yield multipotent fibromodulin (FMOD)-reprogrammed (FReP) cells from dermal fibroblasts. When compared with induced pluripotent stem cells (iPSCs), FReP cells exhibited a superior capability for bone and skeletal muscle regeneration with markedly less tumorigenic risk. Moreover, we showed that the decreased tumorigenicity of FReP cells was directly related to an upregulation of cyclin-dependent kinase inhibitor 2B (CDKN2B) expression during the FMOD reprogramming process. Indeed, sustained suppression of CDKN2B resulted in tumorigenic, pluripotent FReP cells that formed teratomas in vivo that were indistinguishable from iPSC-derived teratomas. These results highlight the pivotal role of CDKN2B in cell fate determination and tumorigenic regulation and reveal an alternative pluripotent/multipotent cell reprogramming strategy that solely uses FMOD protein. © 2019, American Society for Clinical Investigation
Changing POU dimerization preferences converts Oct6 into a pluripotency inducer
� 2016 The Authors. Published under the terms of the CC BY 4.0 license The transcription factor Oct4 is a core component of molecular cocktails inducing pluripotent stem cells (iPSCs), while other members of the POU family cannot replace Oct4 with comparable efficiency. Rather, group III POU factors such as Oct6 induce neural lineages. Here, we sought to identify molecular features determining the differential DNA-binding and reprogramming activity of Oct4 and Oct6. In enhancers of pluripotency genes, Oct4 cooperates with Sox2 on heterodimeric SoxOct elements. By re-analyzing ChIP-Seq data and performing dimerization assays, we found that Oct6 homodimerizes on palindromic OctOct more cooperatively and more stably than Oct4. Using structural and biochemical analyses, we identified a single amino acid directing binding to the respective DNA elements. A change in this amino acid decreases the ability of Oct4 to generate iPSCs, while the reverse mutation in Oct6 does not augment its reprogramming activity. Yet, with two additional amino acid exchanges, Oct6 acquires the ability to generate iPSCs and maintain pluripotency. Together, we demonstrate that cell type-specific POU factor function is determined by select residues that affect DNA-dependent dimerization.Link_to_subscribed_fulltex
An iterative approach of protein function prediction
Background: Current approaches of predicting protein functions from a protein-protein interaction (PPI) dataset are based on an assumption that the available functions of the proteins (a.k.a. annotated proteins) will determine the functions of the proteins whose functions are unknown yet at the moment (a.k.a. un-annotated proteins). Therefore, the protein function prediction is a mono-directed and one-off procedure, i.e. from annotated proteins to un-annotated proteins. However, the interactions between proteins are mutual rather than static and mono-directed, although functions of some proteins are unknown for some reasons at present. That means when we use the similarity-based approach to predict functions of un-annotated proteins, the un-annotated proteins, once their functions are predicted, will affect the similarities between proteins, which in turn will affect the prediction results. In other words, the function prediction is a dynamic and mutual procedure. This dynamic feature of protein interactions, however, was not considered in the existing prediction algorithms.Results: In this paper, we propose a new prediction approach that predicts protein functions iteratively. This iterative approach incorporates the dynamic and mutual features of PPI interactions, as well as the local and global semantic influence of protein functions, into the prediction. To guarantee predicting functions iteratively, we propose a new protein similarity from protein functions. We adapt new evaluation metrics to evaluate the prediction quality of our algorithm and other similar algorithms. Experiments on real PPI datasets were conducted to evaluate the effectiveness of the proposed approach in predicting unknown protein functions.Conclusions: The iterative approach is more likely to reflect the real biological nature between proteins when predicting functions. A proper definition of protein similarity from protein functions is the key to predicting functions iteratively. The evaluation results demonstrated that in most cases, the iterative approach outperformed non-iterative ones with higher prediction quality in terms of prediction precision, recall and F-value
Population level determinants of acute mountain sickness among young men: a retrospective study
<p>Abstract</p> <p>Background</p> <p>Many visitors, including military troops, who enter highland regions from low altitude areas may suffer from acute mountain sickness (AMS), which negatively impacts workable man-hours and increases healthcare costs. The aim of this study was to evaluate the population level risk factors and build a multivariate model, which might be applicable to reduce the effects of AMS on Chinese young men traveling to this region.</p> <p>Methods</p> <p>Chinese highland military medical records were used to obtain data of young men (n = 3727) who entered the Tibet plateau between the years of 2006-2009. The relationship between AMS and travel profile, demographic characteristics, and health behaviors were evaluated by logistic regression. Univariate logistic models estimated the crude odds ratio. The variables that showed significance in the univariate model were included in a multivariate model to derive adjusted odds ratios and build the final model. Data corresponding to odd and even years (2 subsets) were analyzed separately and used in a simple cross-validation.</p> <p>Results</p> <p>Univariate analysis indicated that travel profile, prophylactic use, ethnicity, and province of birth were all associated with AMS in both subsets. In multivariate analysis, young men who traveled from lower altitude (600-800 m <it>vs</it>. 1300-1500 m, adjusted odds ratio (AOR) = 1.32-1.44) to higher altitudes (4100-4300 m <it>vs</it>. 2900-3100 m, AOR = 3.94-4.12; 3600-3700 m <it>vs</it>. 2900-3100 m, AOR = 2.71-2.74) by air or rapid land transport for emergency mission deployment (emergency land deployment <it>vs</it>. normal land deployment, AOR = 2.08-2.11; normal air deployment <it>vs</it>. normal land deployment, AOR = 2.00-2.20; emergency air deployment <it>vs</it>. normal land deployment, AOR = 2.40-3.34) during the cold season (cold <it>vs</it>. warm, AOR = 1.25-1.28) are at great risk for developing AMS. Non-Tibetan male soldiers (Tibetan <it>vs</it>. Han, AOR = 0.03-0.08), born and raised in lower provinces (eastern <it>vs</it>. northwestern, AOR = 1.32-1.39), and deployed without prophylaxis (prophylactic drug <it>vs</it>. none, AOR = 0.75-0.76), also represented a population at significantly increased risk for AMS. The predicted model was built; the area under receiver operating characteristic curve was 0.703.</p> <p>Conclusion</p> <p>Before a group of young men first enter a high altitude area, it is important that a health service plan should be made referring to the group's travel profile and with respect to young men's ethnicity and province of birth. Low-cost Chinese traditional prophylactic drugs might have some effect on decreasing the risk of AMS, although this needs further verification.</p
Large-Scale Fabrication of Boron Nitride Nanotubes via a Facile Chemical Vapor Reaction Route and Their Cathodoluminescence Properties
Cylinder- and bamboo-shaped boron nitride nanotubes (BNNTs) have been synthesized in large scale via a facile chemical vapor reaction route using ammonia borane as a precursor. The structure and chemical composition of the as-synthesized BNNTs are extensively characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and selected-area electron diffraction. The cylinder-shaped BNNTs have an average diameter of about 100 nm and length of hundreds of microns, while the bamboo-shaped BNNTs are 100–500 nm in diameter with length up to tens of microns. The formation mechanism of the BNNTs has been explored on the basis of our experimental observations and a growth model has been proposed accordingly. Ultraviolet–visible and cathodoluminescence spectroscopic analyses are performed on the BNNTs. Strong ultraviolet emissions are detected on both morphologies of BNNTs. The band gap of the BNNTs are around 5.82 eV and nearly unaffected by tube morphology. There exist two intermediate bands in the band gap of BNNTs, which could be distinguishably assigned to structural defects and chemical impurities
Heritable Targeted Inactivation of Myostatin Gene in Yellow Catfish (Pelteobagrus fulvidraco) Using Engineered Zinc Finger Nucleases
Yellow catfish (Pelteobagrus fulvidraco) is one of the most important freshwater aquaculture species in China. However, its small size and lower meat yield limit its edible value. Myostatin (MSTN) is a negative regulator of mammalian muscle growth. But, the function of Mstn in fish remains elusive. To explore roles of mstn gene in fish growth and create a strain of yellow catfish with high amount of muscle mass, we performed targeted disruption of mstn in yellow catfish using engineered zinc-finger nucleases (ZFNs). Employing zebrafish embryos as a screening system to identify ZFN activity, we obtained one pair of ZFNs that can edit mstn in yellow catfish genome. Using the ZFNs, we successfully obtained two founders (Founder July29-7 and Founder July29-8) carrying mutated mstn gene in their germ cells. The mutated mstn allele inherited from Founder July29-7 was a null allele (mstnnju6) containing a 4 bp insertion, predicted to encode function null Mstn. The mutated mstn inherited from Founder July29-8 was a complex type of mutation (mstnnju7), predicted to encode a protein lacking two amino acids in the N-terminal secretory signal of Mstn. Totally, we obtained 6 mstnnju6/+ and 14 mstnnju7/+ yellow catfish. To our best knowledge, this is the first endogenous gene knockout in aquaculture fish. Our result will help in understanding the roles of mstn gene in fish
Global climate forcing of aerosols embodied in international trade
International trade separates regions consuming goods and services from regions where goods and related aerosol pollution are produced. Yet the role of trade in aerosol climate forcing attributed to different regions has never been quantified. Here, we contrast the direct radiative forcing of aerosols related to regions’ consumption of goods and services against the forcing due to emissions produced in each region. Aerosols assessed include black carbon, primary organic aerosol, and secondary inorganic aerosols, including sulfate, nitrate and ammonium. We find that global aerosol radiative forcing due to emissions produced in East Asia is much stronger than the forcing related to goods and services ultimately consumed in that region because of its large net export of emissions-intensive goods. The opposite is true for net importers such as Western Europe and North America: global radiative forcing related to consumption is much greater than the forcing due to emissions produced in these regions. Overall, trade is associated with a shift of radiative forcing from net importing to net exporting regions. Compared to greenhouse gases such as carbon dioxide, the short atmospheric lifetimes of aerosols cause large localized differences between consumption- and production-related radiative forcing. International efforts to reduce emissions in the exporting countries will help alleviate trade-related climate and health impacts of aerosols while lowering global emissions
Waldenström macroglobulinemia with extramedullary involvement at initial diagnosis portends a poorer prognosis
Designing turn-by-turn navigation system for customized wearable user interface
Current technological advancements in wearable intelligence allow us to migrate assistant tools from portable devices to wearable devices. Many researches with varying performance outcomes have been conducted on wearable navigation devices. However, there is no existing Bluetooth-supported turn-by-turn navigation application which supports biker and cyclist with customized wearable user interface. The purpose of this research is to try and fill this gap by investigating the usability of indicator-based smart glasses in real-world bike navigation using Bluetooth for communication. Adopting the Design Science Research (DSR) methodology, a mobile navigation application was developed that could be used with a customized wearable user interface called indicator-based smart glasses, with Bluetooth communication. Moreover, we conducted a usability test with six users in a real biking navigation task. Two paths were selected as the experiment’s environment in Oulu, Finland. We recorded the experiment’s process by a camera. And collected the feedbacks from participants by post-questionnaires. As the results, we found that the glasses can assist user accomplish navigation tasks in simple traffic without many wrong turns. However, it cannot provide clear instructions under some complex traffic.
This research can be extended in future researches by implementing a solution that provides turn-by-turn direction in the navigation application for the indicator-based smart glasses under complex traffic circumstance
- …