491 research outputs found
158µJ pulses from a single transverse mode, large mode-area EDFA
We report the amplification of 10pJ-100pJ, semiconductor diode pulses up to an energy of 158µJ and peak powers >100kW in a multi-stage fibre amplifier chain based on a single-mode, large mode-area erbium doped amplifier design. These results represent the highest single-mode pulse energy ever extracted from any doped fibre system
Interactions between Sheets of Phonons in Liquid 4He
We have created two sheets of 1 K phonons in liquid 4He at 55 mK such that they intersect each
other as they move towards a common point. If the two sheets have a small angle between them, they
interact strongly and create a hot line in the liquid helium. This line is continuously fed with energy
from the two sheets and loses energy by creating high-energy phonons. If the angle between the sheets is
larger than 30 they do not interact but pass through each other. These results give direct evidence for
the composition of the sheets: they comprise strongly interacting low-energy phonons which occupy a
narrow cone in momentum space
20GHz picosecond pulse generation by 1300nm mode-locked quantum dot master oscillator power amplifier
An integrated 1300 nm QD mode-locked narrow stripe MOPA is shown to generate 10.5 ps Fourier transform limited pulses at 20 GHz. The pulse train has an average power of 46.4 mW and peak powers exceeding 0.31 W
Non-critical waveguide alignment for vertically coupled microring using a mode-expanded bus architecture
Vertically coupled microrings in an all-pass filter configuration are fabricated with a range of waveguide misalignments deliberately introduced into the lithography masks to demonstrate noncritical fabrication requirements. The microrings have a mode-expanded bus design which allows a greatly reduced variation in power coupling coefficient-only 6% for fabrication misalignments as high as 1 mum. This represents a five-fold improvement in fabrication tolerance when compared with conventional design
Demonstration of a lossless monolithic 16x16 QW SOA switch
10Gb/s error-free operation of the first monolithic 16×16 quantum well semiconductor optical amplifier switch is demonstrated. The switch has a 2dB facet-to-facet gain and a minimum power penalty of 2.5dB
Magnesium–carbon hydrogen storage hybrid materials produced by reactive ball milling in hydrogen
Time-resolved studies uncovered kinetics and mechanism of Mg–hydrogen interactions during High energy reactive ball milling in hydrogen (HRBM) in presence of various types of carbon, including graphite (G), activated carbon (AC), multi-wall carbon nanotubes (MWCNT), expandable (EG) and thermally-expanded (TEG) graphite. Introduction of carbon significantly changes the hydrogenation behaviour, which becomes strongly dependent on the nature and amount of carbon additive. For the materials containing 1 wt.% AC or TEG, and 5 wt.% MWCNT, the hydrogenation becomes superior to that for the individual magnesium and finishes within 1 h. Analysis of the data indicates that carbon acts as a carrier of the ‘‘activated’’ hydrogen by a mechanism of spill-over. For Mg–G the hydrogenation starts from an incubation period and proceeds slower. An increase in the content of EG and TEG above 1 wt.% results in the deterioration of the hydrogenation kinetics. The effect of carbon additives has roots in their destruction during the HRBM to form graphene layers encapsulating the MgH2 nanoparticles and preventing the grain growth. This results in an increase of absorption–desorption cycle stability and a decrease of the MgH2 crystallite size in the re-hydrogenated Mg–C hybrid materials (40–125 nm) as compared to Mg alone (180 nm).Web of Scienc
Domain structure of bulk ferromagnetic crystals in applied fields near saturation
We investigate the ground state of a uniaxial ferromagnetic plate with
perpendicular easy axis and subject to an applied magnetic field normal to the
plate. Our interest is the asymptotic behavior of the energy in macroscopically
large samples near the saturation field. We establish the scaling of the
critical value of the applied field strength below saturation at which the
ground state changes from the uniform to a branched domain magnetization
pattern and the leading order scaling behavior of the minimal energy.
Furthermore, we derive a reduced sharp-interface energy giving the precise
asymptotic behavior of the minimal energy in macroscopically large plates under
a physically reasonable assumption of small deviations of the magnetization
from the easy axis away from domain walls. On the basis of the reduced energy,
and by a formal asymptotic analysis near the transition, we derive the precise
asymptotic values of the critical field strength at which non-trivial
minimizers (either local or global) emerge. The non-trivial minimal energy
scaling is achieved by magnetization patterns consisting of long slender
needle-like domains of magnetization opposing the applied fieldComment: 38 pages, 7 figures, submitted to J. Nonlin. Sci
Production of charcoal briquettes from cotton stalk in malawi: Methodology for feasibility studies using experiences in Sudan
Non-Critical Waveguide Alignment for Vertically-Coupled Microring using a Mode-Expanded Bus Architecture
Vertically coupled microrings in an all-pass filter configuration are fabricated with a range of waveguide misalignments deliberately introduced into the lithography masks to demonstrate noncritical fabrication requirements. The microrings have a mode-expanded bus design which allows a greatly reduced variation in power coupling coefficient-only 6% for fabrication misalignments as high as 1 µm. This represents a five-fold improvement in fabrication tolerance when compared with conventional designs
Transformation elastodynamics and active exterior acoustic cloaking
This chapter consists of three parts. In the first part we recall the
elastodynamic equations under coordinate transformations. The idea is to use
coordinate transformations to manipulate waves propagating in an elastic
material. Then we study the effect of transformations on a mass-spring network
model. The transformed networks can be realized with "torque springs", which
are introduced here and are springs with a force proportional to the
displacement in a direction other than the direction of the spring terminals.
Possible homogenizations of the transformed networks are presented, with
potential applications to cloaking. In the second and third parts we present
cloaking methods that are based on cancelling an incident field using active
devices which are exterior to the cloaked region and that do not generate
significant fields far away from the devices. In the second part, the exterior
cloaking problem for the Laplace equation is reformulated as the problem of
polynomial approximation of analytic functions. An explicit solution is given
that allows to cloak larger objects at a fixed distance from the cloaking
device, compared to previous explicit solutions. In the third part we consider
the active exterior cloaking problem for the Helmholtz equation in 3D. Our
method uses the Green's formula and an addition theorem for spherical outgoing
waves to design devices that mimic the effect of the single and double layer
potentials in Green's formula.Comment: Submitted as a chapter for the volume "Acoustic metamaterials:
Negative refraction, imaging, lensing and cloaking", Craster and Guenneau
ed., Springe
- …