Comparison of Compression Schemes for CLARA

CLARA (Compact Linear Advanced Research Accelerator)at Daresbury Laboratory is proposed to be the UK's national FEL test facility. The accelerator will be a ~250 MeV electron linac capable of producing short, high brightness electron bunches. The machine comprises a 2.5cell RF photocathode gun, one 2 m and three 5 m normal conducting S-band (2998MHz) accelerating structures and a variable magnetic compression chicane. CLARA will be used as a test bed for novel FEL configurations. We present a comparison of acceleration and compression schemes for the candidate machine layout.Comment: 3 pages, 5 figures, IPAC 201

An Analysis of the Tradeoffs between Policy Instruments to Induce Dairy Producers in California to Participate in a Centralized Digester

Tradeoff between different utility rates and policy intervention to induce dairy producer to join a regional digester are studied. Results demonstrate that a regional digester for the dairy industry in California is feasible given the digester receives $0.05 per kWh and government intervention or$0.0925 per kWh with no intervention.Agricultural and Food Policy, Livestock Production/Industries,

Matching Contributions and the Voluntary Provision of a Pure Public Good: Experimental Evidence

Laboratory experiments are used to study the voluntary provision of a pure public good in the presence of an anonymous external donor. The external funds are used in two different settings, lump-sum matching and one-to-one matching, to examine how allocations to the public good are affected. The experimental results reveal that allocations to the public good under lumpsum matching are significantly higher, and have significantly lower within-group dispersion, relative to one-to-one matching and a baseline setting without external matching funds.public goods, free riding, laboratory experiments

Quantum phases of bosons in double-well optical lattices

We study the superfluid to Mott insulator transition of bosons in a two-legged ladder optical lattice, of a type accessible in current experiments on double-well optical lattices. The zero-temperature phase diagram is mapped out, with a focus on its dependence upon interchain hopping and the tilt between double wells. We find that the unit-filling Mott phase exhibits a non-monotonic behavior as a function of the tilt parameter, producing a reentrant phase transition between Mott insulator and superfluid phases.Comment: 5 pages, 5 figure

Mobile work platform for initial lunar base construction

Described is a system of equipment intended for site preparation and construction of a lunar base. The proximate era of lunar exploration and the initial phase of outpost habitation are addressed. Drilling, leveling, trenching, and cargo handling are within the scope of the system's capabilities. The centerpiece is a three-legged mobile work platform, named SKITTER. Using standard interfaces, the system is modular in nature and analogous to the farmer's tractor and implement set. Conceptually somewhat different from their Earthbound counterparts, the implements are designed to take advantage of the lunar environment as well as the capabilities of the work platform. The proposed system is mechanically simple and weight efficient

The BTB/POZ zinc finger protein Broad-Z3 promotes dendritic outgrowth during metamorphic remodeling of the peripheral stretch receptor dbd

<p>Abstract</p> <p>Background</p> <p>Various members of the family of BTB/POZ zinc-finger transcription factors influence patterns of dendritic branching. One such member, <it>Broad</it>, is notable because its BrZ3 isoform is widely expressed in <it>Drosophila </it>in immature neurons around the time of arbor outgrowth. We used the metamorphic remodeling of an identified sensory neuron, the dorsal bipolar dendrite sensory neuron (dbd), to examine the effects of BrZ3 expression on the extent and pattern of dendrite growth during metamorphosis.</p> <p>Results</p> <p>Using live imaging of dbd in <it>Drosophila </it>pupae, we followed its normal development during metamorphosis and the effect of ectopic expression of BrZ3 on this development. After migration of its cell body, dbd extends a growth-cone that grows between two muscle bands followed by branching and turning back on itself to form a compact dendritic bundle. The ectopic expression of the BrZ3 isoform, using the GAL4/UAS system, caused dbd's dendritic tree to transform from its normal, compact, fasciculated form into a comb-like arbor that spread over on the body wall. Time-lapse analysis revealed that the expression of BrZ3 caused the premature extension of the primary dendrite onto immature myoblasts, ectopic growth past the muscle target region, and subsequent elaboration onto the epidermis. To control the timing of expression of BrZ3, we used a temperature-sensitive GAL80 mutant. When BrZ3 expression was delayed until after the extension of the primary dendrite, then a normal arbor was formed. By contrast, when BrZ3 expression was confined to only the early outgrowth phase, then ectopic arbors were subsequently formed and maintained on the epidermis despite the subsequent absence of BrZ3.</p> <p>Conclusions</p> <p>The adult arbor of dbd is a highly branched arbor whose branches self-fasciculate to form a compact dendritic bundle. The ectopic expression of BrZ3 in this cell causes a premature extension of its growth-cone, resulting in dendrites that extend beyond their normal muscle substrate and onto the epidermis, where they form a comb-shaped, ectopic arbor. Our quantitative data suggest that new ectopic arbor represents an 'unpacking' of the normally fasciculated arbor onto the epidermis. These data suggest that the nature of their local environment can change dendrite behavior from self-adhesion to self-avoidance.</p

Development and Qualification of Alternate Blowing Agents for Space Shuttle External Tank Thermal Protection System

The Aerospace industry has a long history of using low density polyurethane and polyurethane-modified isocyanurate foam systems as lightweight, low cost, easily processed cryogenic Thermal Protection Systems (TPS) for ascent vehicles. The Thermal Protection System of the Space Shuttle External Tank (ET) is required so that quality liquid cryogenic propellant can be supplied to the Orbiter main engines and to protect the metal structure of the tanks from becoming too hot from aerodynamic heating, hence preventing premature break-up of the tank. These foams are all blown with CFC-1 I blowing agent which has been identified by the Environmental Protection Agency (EPA) as an ozone depleting substance. CFCs will not be manufactured after 1995, Consequently, alternate blowing agent substances must be identified and implemented to assure continued ET manufacture and delivery. This paper describes the various testing performed to select and qualify HCFC-1 41 b as a near term drop-in replacement for CFC-11. Although originally intended to be a one for one substitution in the formulation, several technical issues were identified regarding material performance and processability which required both formulation changes and special processing considerations to overcome. In order to evaluate these material changes, each material was subjected to various tests to qualify them to meet the various loads imposed on them during long term storage, pre-launch operations, launch, separation and re-entry. Each material was tested for structural, thermal, aeroshear, and stress/strain loads for the various flight environments each encounters. Details of the development and qualification program and the resolution of specific problems are discussed in this paper