95 research outputs found

    Dynamics and Deposition of Sediment-Bearing Multi- Pulsed Flows and Geological Implication

    Get PDF
    Copyright © 2019, SEPM (Society for Sedimentary Geology) Previous studies on dilute, multi-pulsed, subaqueous saline flows have demonstrated that pulses will inevitably advect forwards to merge with the flow front. On the assumption that pulse merging occurs in natural-scale turbidity currents, it was suggested that multi-pulsed turbidites that display vertical cycles of coarsening and fining would transition laterally to single-pulsed, normally graded turbidites beyond the point of pulse merging. In this study, experiments of dilute, single- and multi-pulsed sediment-bearing flows (turbidity currents) are conducted to test the linkages between downstream flow evolution and associated deposit structure. Experimental data confirm that pulse merging occurs in laboratory-scale turbidity currents. However, only a weak correspondence was seen between longitudinal variations in the internal flow dynamics and the vertical structure of deposits; multi-pulsed deposits were documented, but transitioned to single-pulsed deposits before the pulse merging point. This early transition is attributed to rapid sedimentation-related depletion of the coarser-grained suspended fraction in the laboratory setting, whose absence may have prevented the distal development of multi-pulsed deposits; this factor complicates estimation of the transition point in natural-scale turbidite systems

    Streamwise turbulence modulation in non-uniform open-channel clay suspension flows

    Get PDF
    Cohesive sediment particles are ubiquitous in environmental flows. The cohesive properties of clay promote the formation of clay flocs and gels and relatively small suspended clay concentrations can enhance or suppress turbulence in a flow. Furthermore, flows are naturally non-uniform, varying in space and time, yet the dynamics of non-uniform open-channel clay suspension flows is poorly understood. For the first time, the adaptation time and length scales of non-uniform clay suspension flows were quantified using novel experiments with spatially varying but temporally uniform flow. Different levels of turbulence enhancement and attenuation were identified as the flow decelerates or accelerates. Results highlight that decelerating clay suspension flows crucially have a longer adaptation time than accelerating clay suspension flows. This is explained by the longer timescale required for the formation of bonds between cohesive particles in turbulence attenuated flows after deceleration than the rapid breakdown of bonds in turbulent flows after acceleration of clay suspension flows. This hysteresis is more pronounced for higher concentration decelerating flows that pass through a larger variety of clay flow types of turbulence enhancement and attenuation. These different adaptation time scales and associated clay flow type transitions are likely to affect clay flow dynamics in a variety of fluvial and submarine settings

    Dynamics and deposition of sediment-bearing multi-pulsed flows and geological implication

    Get PDF
    Previous studies on dilute, multi-pulsed, subaqueous saline flows have demonstrated that pulses will inevitably advect forwards to merge with the flow front. On the assumption that pulse merging occurs in natural-scale turbidity currents, it was suggested that multi-pulsed turbidites that display vertical cycles of coarsening and fining would transition laterally to single-pulsed, normally graded turbidites beyond the point of pulse merging. In this study, experiments of dilute, single- and multi-pulsed sediment-bearing flows (turbidity currents) are conducted to test the linkages between downstream flow evolution and associated deposit structure. Experimental data confirm that pulse merging occurs in laboratory-scale turbidity currents. However, only a weak correspondence was seen between longitudinal variations in the internal flow dynamics and the vertical structure of deposits; multi-pulsed deposits were documented, but transitioned to single-pulsed deposits before the pulse merging point. This early transition is attributed to rapid sedimentation-related depletion of the coarser-grained suspended fraction in the laboratory setting, whose absence may have prevented the distal development of multi-pulsed deposits; this factor complicates estimation of the transition point in natural-scale turbidite systems

    System packaging & integration for a swallowable capsule using a direct access sensor

    Get PDF
    Technological developments in biomedical microsystems are opening up new opportunities to improve healthcare procedures. Swallowable diagnostic capsules are an example of this. In this paper, a diagnostic capsule technology is described based on direct-access sensing of the Gastro Intestinal (GI) fluids throughout the GI tract. The objective of this paper is two-fold: i) develop a packaging method for a direct access sensor, ii) develop an encapsulation method to protect the system electronics. The integrity of the interconnection after sensor packaging and encapsulation is correlated to its reliability and thus of importance. The zero level packaging of the sensor was achieved by using a so called Flip Chip Over Hole (FCOH) method. This allowed the fluidic sensing media to interface with the sensor, while the rest of the chip including the electrical connections can be insulated effectively. Initial tests using Anisotropic Conductive Adhesive (ACA) interconnect for the FCOH demonstrated good electrical connections and functionality of the sensor chip. Also a preliminary encapsulation trial of the flip chipped sensor on a flexible test substrate has been carried out and showed that silicone encapsulation of the system is a viable option

    Relating the Flow Processes and Bedforms of Steady-State and Waning Density Currents

    Get PDF
    © Copyright© 2020 de Cala, Ohata, Dorrell, Naruse, Patacci, Amy, Simmons, McLelland and McCaffrey. The interaction between turbidity currents and mobile substrates can lead to the development of different types of bedforms. Although much research has been conducted on bedform development beneath open channel flows, research into bedform development beneath waning gravity currents is relatively rare. Analysis of density current-related bedform development has therefore relied upon open channel flow phase diagrams. We report on an experimental study designed to assess the development of bedforms under steady and waning saline density currents. The experimental density currents developed stepped density profiles in which a higher-density basal zone was separated from the ambient fluid by a zone of intermediate density; any bedforms that developed were contained within the bottom layer of the current. Under different conditions ripples, dunes, downstream migrating antidunes and long wavelength antidunes were observed to form and could be distinguished based on their interactions and phase relationships with the upper surface of the lower denser layer of the current. Due to limited mixing between the upper and lower layer of the current and maintenance of current momentum, currents set with slowing discharge flow rates maintained a steady flow velocity in the lower layer of the flow. As a result, sustained bedform formative conditions were achieved within this lower layer, while waning current conditions effected the rest of the flow. Under waning currents, it was seen how pre-existing bed states can determine the subsequent evolution of bedforms. This illustrates the limitations of existing phase diagrams as they do not account for trajectory or rate of passage of flows through different bedform phase spaces. In order to establish a reliable quantitative association between the flow regime and the type of bedform development, it is critical to adopt an appropriate Froude number calculation method for stratified flow. The updated density current phase diagram indicates supercritical flow can be achieved at lower flow velocities than for open channel flows due to the effects of reduced gravity. Bedform depositional structures found in outcrop and on the modern sea floor provide data that helps to interpret the hydrodynamic and sedimentological character of the current that formed them. Therefore, understanding the processes involved in bedform development beneath density currents will enable more accurate estimation of the properties of flows

    Interpreting syndepositional sediment remobilization and deformation beneath submarine gravity flows; a kinematic boundary layer approach

    Get PDF
    Turbidite sandstones and related deposits commonly contain deformation structures and remobilized sediment that might have resulted from post-depositional modification such as downslope creep (e.g. slumping) or density-driven loading by overlying deposits. However, we consider that deformation can occur during the passage of turbidity currents that exerted shear stress on their substrates (whether entirely pre-existing strata, sediment deposited by earlier parts of the flow itself or some combination of these). Criteria are outlined here, to avoid confusion with products of other mechanisms (e.g. slumping or later tectonics), which establish the synchronicity between the passage of overriding flows and deformation of their substrates. This underpins a new analytical framework for tracking the relationship between deformation, deposition and the transit of the causal turbidity current, through the concept of kinematic boundary layers. Case study examples are drawn from outcrop (Miocene of New Zealand, and Apennines of Italy) and subsurface examples (Britannia Sandstone, Cretaceous, UK Continental Shelf). Example structures include asymmetric flame structures, convolute lamination, some debritic units and injection complexes, together with slurry and mixed slurry facies. These structures may provide insight into the rheology and dynamics of submarine flows and their substrates, and have implications for the development of subsurface turbidite reservoirs

    The inherent instability of leveed seafloor channels

    Get PDF
    New analytical models demonstrate that under 2 aggradational flow conditions seafloor channel-levee systems are inherently unstable; both channel area and stability necessarily decrease at long timescales. In time such systems must avulse purely through internal (autogenic) forcing. Although autogenic instabilities likely arise over long enough time for additional allogenic forcing to be expected, channel-levee sensitivity to variations in flow character depends on the prior degree of system evolution. Recalibrated modern Amazon Fan avulsion timings are consistent with this model, challenging accepted interpretations of avulsion triggering

    The Solar Dynamics Observatory (SDO) Education and Outreach (E/PO) Program: Changing Perceptions One Program at a Time

    Get PDF
    We outline the context and overall philosophy for the combined Solar Dynamics Observatory (SDO) Education and Public Outreach (E/PO) program, present a brief overview of all SDO E/PO programs along with more detailed highlights of a few key programs, followed by a review of our results to date, conclude a summary of the successes, failures, and lessons learned, which future missions can use as a guide, while incorporating their own content to enhance the public's knowledge and appreciation of science and technology as well as its benefit to society

    Experimental application to a water delivery canal of a distributed MPC with stability constraints

    Get PDF
    In this work, a novel distributed MPC algorithm, denoted D-SIORHC, is applied to upstream local control of a pilot water delivery canal. The D-SIORHC algorithm is based on MPC control agents that incorporate stability constraints and communicate only with their adjacent neighbors in order to achieve a coordinated action. Experimental results that show the effect of the parameters configuring the local controllers are presented

    A meta-study of relationships between fluvial channel-body stacking pattern and aggradation rate: implications for sequence stratigraphy

    Get PDF
    A quantitative comparison of 20 literature case studies of fluvial sedimentary successions tests common assumptions made in published models of alluvial architecture concerning (1) inverse proportionality between channel-deposit density and floodplain aggradation rates, and (2) resulting characteristics of channel-body geometries and connectedness. Our results do not support the relationships predicted by established stratigraphy models: the data suggest that channel-body density, geometry, and stacking pattern are not reliable diagnostic indicators of rates of accommodation creation. Hence, these architectural characteristics alone do not permit the definition of accommodation-based “systems tracts” and “settings”, and this calls into question current sequence stratigraphic practice in application to fluvial successions
    corecore