8,036 research outputs found

    Study of multiple cycles valves

    Get PDF
    A discussion is presented regarding valves which can be cycled repeatedly and are available from industry for application in the inlet system for the Pioneer Venus Probe mass spectrometer. Both solenoid type and latching type valves are considered. The study is divided into two principal areas: (1) preparation of a valve specification reflecting the requirements of the inlet system cyclic valves for the Pioneer Venus Probe mass spectrometer and the submittal of this specification to potential valve suppliers for their response and proposal; (2) preparation of a design layout of an optimum cyclic valve meeting all of the valve specification requirements

    Space shuttle OMS helium regulator design and development

    Get PDF
    Analysis, design, fabrication and design verification testing was conducted on the technological feasiblity of the helium pressurization regulator for the space shuttle orbital maneuvering system application. A prototype regulator was fabricated which was a single-stage design featuring the most reliable and lowest cost concept. A tradeoff study on regulator concepts indicated that a single-stage regulator with a lever arm between the valve and the actuator section would offer significant weight savings. Damping concepts were tested to determine the amount of damping required to restrict actuator travel during vibration. Component design parameters such as spring rates, effective area, contamination cutting, and damping were determined by test prior to regulator final assembly. The unit was subjected to performance testing at widely ranging flow rates, temperatures, inlet pressures, and random vibration levels. A test plan for propellant compatibility and extended life tests is included

    Congener specific analysis of polychlorinated terphenyls

    Get PDF
    In order to identify and to quantify polychlorinated terphenyls (PCT) in environmental matrices, the chro- matographic behavior of coplanar and non-coplanar congeners was evaluated. A mixture of 16 single PCT congeners was used for method development. Four of these compounds were synthesized for the first time by SUZUKI-coupling reaction. These were p-PCT (2,200 ,6,600 -tetrachloro-, 20 ,3,300 ,4,400 ,50 ,-hexachloro-, 20 ,3,300 ,5,50 ,500 -hexachloro-) and m-PCT (2,200 ,3,300 ,5,500 -hexachloro-). They were characterized by NMR ( 1 H, 13 C) spectroscopy. By means of the new column chromatographic clean-up reported here, a good matrix removal and the separation of the coplanar PCT congeners from the non-coplanar ones was obtained. The recovery rates for all congeners were good for the PCT in different test matrices like fat, charcoal, and soil. The quality of the clean-up, the separation and the recovery rates were determined by GC/MS analysis. The method was applied for the first time to a real sample from a fire accident, where different PCT, obviously formed during the combustion process, were found. The conclusion is drawn that this method is suitable for the analysis of PCT in different environmental samples

    Design for pressure regulating components

    Get PDF
    The design development for Pressure Regulating Components included a regulator component trade-off study with analog computer performance verification to arrive at a final optimized regulator configuration for the Space Storable Propulsion Module, under development for a Jupiter Orbiter mission. This application requires the pressure regulator to be capable of long-term fluorine exposure. In addition, individual but basically identical (for purposes of commonality) units are required for separate oxidizer and fuel pressurization. The need for dual units requires improvement in the regulation accuracy over present designs. An advanced regulator concept was prepared featuring redundant bellows, all metallic/ceramic construction, friction-free guidance of moving parts, gas damping, and the elimination of coil springs normally used for reference forces. The activities included testing of actual size seat/poppet components to determine actual discharge coefficients and flow forces. The resulting data was inserted into the computer model of the regulator. Computer simulation of the propulsion module performance over two mission profiles indicated satisfactory minimization of propellant residual requirements imposed by regulator performance uncertainties

    Spot evolution in the eclipsing binary CoRoT 105895502

    Full text link
    Stellar activity is ubiquitous in late-type stars. The special geometry of eclipsing binary systems is particularly advantageous to study the stellar surfaces and activity. We present a detailed study of the 145 d CoRoT light curve of the short-period eclipsing binary CoRoT 105895502. By means of light-curve modeling with Nightfall, we determine the orbital period, effective temperature, Roche-lobe filling factors, mass ratio, and orbital inclination of CoRoT 105895502 and analyze the temporal behavior of starspots in the system. Our analysis shows one comparably short-lived (about 40 d) starspot, remaining quasi-stationary in the binary frame, and one starspot showing prograde motion at a rate of 2.3 deg per day, whose lifetime exceeds the duration of the observation. In the CoRoT band, starspots account for as much as 0.6 % of the quadrature flux of CoRoT 105895502, however we cannot attribute the spots to individual binary components with certainty. Our findings can be explained by differential rotation, asynchronous stellar rotation, or systematic spot evolution.Comment: Accepted in A&

    Construction and application of a questionnaire for the social scientific investigation of environmental noise effects

    Get PDF
    A social psychological questionnair has been developed to study the effects of environmental noise and was applied to 636 people living in 19 different areas of Hamburg. The theoretical foundations and the statistical means employed in its development are described. Four main reactions to noise are isolated statistically, and it is determined that these are moderated by several intervening variables, chief of which are coping capacity for noise, the perceived dangerousness of the noise souce, other daily loads and the individual's liability

    Spectroscopic test of Bose-Einstein statistics for photons

    Full text link
    Using Bose-Einstein-statistics-forbidden two-photon excitation in atomic barium, we have limited the rate of statistics-violating transitions, as a fraction ν\nu of an equivalent statistics-allowed transition rate, to ν<4.0×1011\nu<4.0\times10^{-11} at the 90% confidence level. This is an improvement of more than three orders of magnitude over the best previous result. Additionally, hyperfine-interaction enabling of the forbidden transition has been observed, to our knowledge, for the first time

    Recent advances in minimally invasive colorectal cancer surgery

    Get PDF
    Laparoscopy has improved surgical treatment of various diseases due to its limited surgical trauma and has developed as an interesting therapeutic alternative for the resection of colorectal cancer. Despite numerous clinical advantages (faster recovery, less pain, fewer wound and systemic complications, faster return to work) the laparoscopic approach to colorectal cancer therapy has also resulted in unusual complications, i.e. ureteral and bladder injury which are rarely observed with open laparotomy. Moreover, pneumothorax, cardiac arrhythmia, impaired venous return, venous thrombosis as well as peripheral nerve injury have been associated with the increased intraabdominal pressure as well as patient's positioning during surgery. Furthermore, undetected small bowel injury caused by the grasping or cauterizing instruments may occur with laparoscopic surgery. In contrast to procedures performed for nonmalignant conditions, the benefits of laparoscopic resection of colorectal cancer must be weighed against the potential for poorer long-term outcomes of cancer patients that still has not been completely ruled out. In laparoscopic colorectal cancer surgery, several important cancer control issues still are being evaluated, i.e. the extent of lymph node dissection, tumor implantation at port sites, adequacy of intraperitoneal staging as well as the distance between tumor site and resection margins. For the time being it can be assumed that there is no significant difference in lymph node harvest between laparoscopic and open colorectal cancer surgery if oncological principles of resection are followed. As far as the issue of port site recurrence is concerned, it appears to be less prevalent than first thought (range 0-2.5%), and the incidence apparently corresponds with wound recurrence rates observed after open procedures. Short-term (3-5 years) survival rates have been published by a number of investigators, and survival rates after laparoscopic surgery appears to compare well with data collected after conventional surgery for colorectal cancer. However, long-term results of prospective randomized trials are not available. The data published so far indicate that the oncological results of laparoscopic surgery compare well with the results of the conventional open approach. Nonetheless, the limited information available from prospective studies leads us to propose that minimally invasive surgery for colorectal cancer surgery should only be performed within prospective trials
    corecore