Laser anemometry techniques for turbine applications

Laser anemometry offers a nonintrusive means for obtaining flow field information. Current research at NASA Lewis Research Center is focused on instrumenting a warm turbine facility with a laser anemometer system. In an effort to determine the laser anemometer system best qualified for the warm turbine environment, the performance of a conventional laser fringe anemometer and a two spot time of flight system were compared with a new, modified time of flight system, called a Four Spot laser anemometer. The comparison measurements were made in highly turbulent flows near walls. The Four Spot anemometer uses elliptical spots to increase the flow acceptance angle to be comparable to that of a Laser Fringe Anemometer. Also, the Four Spot uses an optical code that vastly simplifies the pulse detection processor. The results of the comparison measurements will exemplify which laser anemometer system is best suited to the hostile environment typically encountered in warm rotating turbomachinery

Laser anemometry: A status report

A laser anemometer system is being developed for the warm turbine facility as part of the HOST program. The system will be built using results obtained from the analytical and experimental research program. The status report of the laser anemometry applications research effort is presented. The designs for the turbine casing, the windows, and the positioning system were completed. A block diagram of the laser anemometer system, signal processing scheme, and computer system is given

DY determinants, possibly associated with novel class II molecules, stimulate autoreactive CD4+ T cells with suppressive activity

A set of T cell clones (TCC) isolated from HLA-DR-, Dw-, DQ-matched allogeneic MLCs was found to proliferate autonomously when stimulated with cells carrying a wide range of class I or II specificities. This apparently unrestricted proliferation was relatively weak, and only low levels of IL-2 were present in the supernatants of stimulated cells. Autologous as well as allogeneic PBMC and B lymphoblastoid cell lines (B-LCL) were capable of stimulating such clones, which were also restimulated by suppressive, but not by helper, TCC. Moreover, such clones displayed the unusual property of autostimulation. mAb inhibition experiments suggested that class II- or class II-restricted antigens were involved in stimulation. Thus, certain "broad" mAbs (TU39, SG520) reacting with multiple locus products inhibited activation of these reagents, but none of those reacting more specifically with DR (TU34, TU37, L243, Q2/70, SG157), DQ (TU22, SPV- L3, Leu 10), or DP (B7/21), or mixtures of these mAbs, were able to do so. Evidence from sequential immunoprecipitation experiments suggested that mAb TU39 bound class II-like molecules other than DR, DQ, and DP on TCC and B-LCL, and it is therefore proposed that such putative novel class II-like molecules may carry the stimulating determinants for these autoreactive clones. DY-reactive clones lacked helper activity for B cells but mediated potent suppressive activity on T cell proliferative responses that was not restricted by the HLA type of the responding cells. Suppressive activity was induced in normal PBMC by such clones, as well as by independent suppressive clones, which was also inhibited only by mAb TU39. These findings lead to the proposal that DY-reactive autostimulatory cells may constitute a self- maintaining suppressive circuit, the level of activity of which would be regulated primarily by the availability of IL-2 in the microenvironmen

"Tolerization" of human T-helper cell clones by chronic exposure to alloantigen

Induction of clonal anergy in T-helper (Th) cells may have a role in regulating immune responses. A model system for studying Th cell tolerization at the clonal level in vitro could be useful for investigating the mechanisms involved. Accordingly, alloreactive helper cells were maintained in culture with interleukin 2 (IL 2) by intermittent stimulation with specific antigen. Regardless of the frequency of antigen stimulation, clones of age less than ca. 35 population doublings (PD) were found to undergo antigen-specific autocrine clonal expansion in the absence of exogenous IL 2. Such young clones (designated as phase I) could therefore not be "tolerized" by frequent exposure to antigen. In contrast, most clones of age greater than ca. 35 PD could be tolerized by frequent exposure to antigen (designated as phase II clones). Their autocrine proliferation was then blocked, although they still recognized antigen specifically as shown by their retained ability to secrete interferon-gamma (IFN-gamma) and granulocyte-macrophage colony stimulating factor (GM-CSF). The mechanism of response failure involved both an inability to upregulate IL 2 receptors in the absence of exogenous IL 2, as well as an inability to secrete IL 2. These defects were not overcome by stimulation with mitogens or calcium ionophore and phorbol esther in place of alloantigen. T-cell receptor, alpha, beta, and gamma-chain gene rearrangements remained identical in phase I and phase II clones. Tolerization of phase II clones could be avoided by increasing the period between antigen exposures. Despite this, whether or not phase II cells were capable of autocrine proliferation, they were found to have acquired the novel function of inducing suppressive activity in fresh lymphocytes. Suppressor-induction was blocked by the broadly reactive MHC class II-specific monoclonal antibody (moAb) TU39, but not by moAb preferentially reacting only with HLA-DR, DQ, or DP. Sequential immunoprecipitation on T-cell clones showed the presence of a putative non-DR, DQ, DP, TU39+ molecule on phase II clones. However, this molecule was also found on phase I clones. The nature of the TU39-blockable suppressor-inducing determinant present on phase II but not on (most) phase I clones thus remains to be clarified. In addition to suppressor-induction activity, phase II clones also acquired lytic potential as measured in a lectin approximation system. Cytotoxic (CTX) potential was also not influenced by the frequency of antigenic stimulation and could be viewed as a constitutive modulation of clonal functio

Time resolved X ray absorption spectroscopy of infrared laser induced temperature jumps in liquid water

A time resolved X ray absorption study of the structural dynamics of liquid water on a picosecond timescale is presented. We apply femtosecond midinfrared pulses to resonantly excite the intramolecular O H stretching band of liquid water and monitor the transient response in the oxygen K edge absorption spectrum with picosecond X ray pulses. In this way, structural changes in the hydrogen bond network of liquid water upon an ultrafast temperature jump of approximately 20 K are investigated. The changes of the X ray absorption as induced by such a temperature jump are about 3.2 . This demonstrates that our method serves as a sensitive probe of transient structural changes in liquid water and that combined infrared laser synchrotron experiments with substantially shorter X ray pulses, such as generated with a femtosecond slicing scheme, are possibl

An Assessment of NASA Glenn's Aeroacoustic Experimental and Predictive Capabilities for Installed Cooling Fans

Driven by the need for low production costs, electronics cooling fans have evolved differently than the bladed components of gas turbine engines which incorporate multiple technologies to enhance performance and durability while reducing noise emissions. Drawing upon NASA Glenn's experience in the measurement and prediction of gas turbine engine aeroacoustic performance, tests have been conducted to determine if these tools and techniques can be extended for application to the aerodynamics and acoustics of electronics cooling fans. An automated fan plenum installed in NASA Glenn's Acoustical Testing Laboratory was used to map the overall aerodynamic and acoustic performance of a spaceflight qualified 80 mm diameter axial cooling fan. In order to more accurately identify noise sources, diagnose performance limiting aerodynamic deficiencies, and validate noise prediction codes, additional aerodynamic measurements were recorded for two operating points: free delivery and a mild stall condition. Non-uniformities in the fan s inlet and exhaust regions captured by Particle Image Velocimetry measurements, and rotor blade wakes characterized by hot wire anemometry measurements provide some assessment of the fan aerodynamic performance. The data can be used to identify fan installation/design changes which could enlarge the stable operating region for the fan and improve its aerodynamic performance and reduce noise emissions