Efficacy of adjunctive azithromycin versus single-dose cephalosporin prophylaxis for caesarean scar defect : Study protocol for a randomised controlled trial

Peer reviewedPublisher PD

Oxidation resistance of graphene-coated Cu and Cu/Ni alloy

The ability to protect refined metals from reactive environments is vital to many industrial and academic applications. Current solutions, however, typically introduce several negative effects, including increased thickness and changes in the metal physical properties. In this paper, we demonstrate for the first time the ability of graphene films grown by chemical vapor deposition to protect the surface of the metallic growth substrates of Cu and Cu/Ni alloy from air oxidation. SEM, Raman spectroscopy, and XPS studies show that the metal surface is well protected from oxidation even after heating at 200 \degree C in air for up to 4 hours. Our work further shows that graphene provides effective resistance against hydrogen peroxide. This protection method offers significant advantages and can be used on any metal that catalyzes graphene growth

Thermal Properties of Isotopically Engineered Graphene

In addition to its exotic electronic properties graphene exhibits unusually high intrinsic thermal conductivity. The physics of phonons - the main heat carriers in graphene - was shown to be substantially different in two-dimensional (2D) crystals, such as graphene, than in three-dimensional (3D) graphite. Here, we report our experimental study of the isotope effects on the thermal properties of graphene. Isotopically modified graphene containing various percentages of 13C were synthesized by chemical vapor deposition (CVD). The regions of different isotopic composition were parts of the same graphene sheet to ensure uniformity in material parameters. The thermal conductivity, K, of isotopically pure 12C (0.01% 13C) graphene determined by the optothermal Raman technique, was higher than 4000 W/mK at the measured temperature Tm~320 K, and more than a factor of two higher than the value of K in a graphene sheets composed of a 50%-50% mixture of 12C and 13C. The experimental data agree well with our molecular dynamics (MD) simulations, corrected for the long-wavelength phonon contributions via the Klemens model. The experimental results are expected to stimulate further studies aimed at better understanding of thermal phenomena in 2D crystals.Comment: 14 pages, 3 figure

NMR-Based Structural Modeling of Graphite Oxide Using Multidimensional 13C Solid-State NMR and ab Initio Chemical Shift Calculations

Chemically modified graphenes and other graphite-based materials have attracted growing interest for their unique potential as lightweight electronic and structural nanomaterials. It is an important challenge to construct structural models of noncrystalline graphite-based materials on the basis of NMR or other spectroscopic data. To address this challenge, a solid-state NMR (SSNMR)-based structural modeling approach is presented on graphite oxide (GO), which is a prominent precursor and interesting benchmark system of modified graphene. An experimental 2D C-13 double-quantum/single-quantum correlation SSNMR spectrum of C-13-labeled GO was compared with spectra simulated for different structural models using ab initio geometry optimization and chemical shift calculations. The results show that the spectral features of the GO sample are best reproduced by a geometry-optimized structural model that is based on the Lerf-Klinowski model (Lerf, A. et al. Phys. Chem. B 1998, 102, 4477); this model is composed of interconnected sp(2), 1,2-epoxide, and COH carbons. This study also convincingly excludes the possibility of other previously proposed models, including the highly oxidized structures involving 1,3-epoxide carbons (Szabo, I. et al. Chem. Mater. 2006, 18, 2740). C-13 chemical shift anisotropy (CSA) patterns measured by a 2D C-13 CSA/isotropic shift correlation SSNMR were well reproduced by the chemical shift tensor obtained by the ab initio calculation for the former model. The approach presented here is likely to be applicable to other chemically modified graphenes and graphite-based systems

Triptolide Inhibits the Proliferation of Prostate Cancer Cells and Down-Regulates SUMO-Specific Protease 1 Expression

Recently, traditional Chinese medicine and medicinal herbs have attracted more attentions worldwide for its anti-tumor efficacy. Celastrol and Triptolide, two active components extracted from the Chinese herb Tripterygium wilfordii Hook F (known as Lei Gong Teng or Thunder of God Vine), have shown anti-tumor effects. Celastrol was identified as a natural 26 s proteasome inhibitor which promotes cell apoptosis and inhibits tumor growth. The effect and mechanism of Triptolide on prostate cancer (PCa) is not well studied. Here we demonstrated that Triptolide, more potent than Celastrol, inhibited cell growth and induced cell death in LNCaP and PC-3 cell lines. Triptolide also significantly inhibited the xenografted PC-3 tumor growth in nude mice. Moreover, Triptolide induced PCa cell apoptosis through caspases activation and PARP cleavage. Unbalance between SUMOylation and deSUMOylation was reported to play an important role in PCa progression. SUMO-specific protease 1 (SENP1) was thought to be a potential marker and therapeutical target of PCa. Importantly, we observed that Triptolide down-regulated SENP1 expression in both mRNA and protein levels in dose-dependent and time-dependent manners, resulting in an enhanced cellular SUMOylation in PCa cells. Meanwhile, Triptolide decreased AR and c-Jun expression at similar manners, and suppressed AR and c-Jun transcription activity. Furthermore, knockdown or ectopic SENP1, c-Jun and AR expression in PCa cells inhibited the Triptolide anti-PCa effects. Taken together, our data suggest that Triptolide is a natural compound with potential therapeutic value for PCa. Its anti-tumor activity may be attributed to mechanisms involving down-regulation of SENP1 that restores SUMOylation and deSUMOyaltion balance and negative regulation of AR and c-Jun expression that inhibits the AR and c-Jun mediated transcription in PCa

Relating open-circuit voltage losses to the active layer morphology and contact selectivity in organic solar cells

We demonstrate that voltage losses due to both radiative and non-radiative recombination of charge carriers are strongly dependent on D/A phase separation. By processing the active layer with various solvent additives, we create distinct morphologies that lead to significantly different device open-circuit voltages (VOC), even though the charge transfer state energy (ECT) of the D/A blend remains rather constant. We find that radiative recombination losses are significantly increased for a finely intermixed morphology, due to the large D/A interface area. This leads to a total recombination loss of ECT - qVOC ≈ 0.7 eV. However, considerably smaller losses (0.5 eV), due to suppressed non-radiative recombination, are possible in solar cells where the D/A materials are organized to only allow for selective charge carrier extraction. Using a drift diffusion model, we show that the origin of the reduced non-radiative recombination losses is related to an effect which has not been considered for \u27optimized\u27 solar cells-the suppression of minority carrier diffusion to the \u27wrong\u27 contact. Our results suggest that the built-in field is not sufficiently strong even in \u27optimized\u27 organic solar cells and that selective carrier extraction is critical for further improvements in VOC