27,722 research outputs found
Producing Bose condensates using optical lattices
We relate the entropies of ensembles of atoms in optical lattices to atoms in
simple traps. We then determine which ensembles of lattice-bound atoms will
adiabatically transform into a Bose condensate. This shows a feasible approach
to Bose condensation without evaporative cooling.Comment: RevTeX, 5 pages, 5 eps-figure
Laser Interferometer Gravitational-Wave Observatory beam tube component and module leak testing
Laser Interferometer Gravitational-Wave Observatory (LIGO) is a joint project of the California Institute of Technology and the Massachusetts Institute of Technology funded by the National Science Foundation. The project is designed to detect gravitational waves from astrophysical sources such as supernova and black holes. The LIGO project constructed observatories at two sites in the U.S. Each site includes two beam tubes (each 4 km long) joined to form an "L" shape. The beam tube is a 1.25 m diam 304 L stainless steel, ultrahigh vacuum tube that will operate at 1×10^–9 Torr or better. The beam tube was manufactured using a custom spiral weld tube mill from material processed to reduce the outgassing rate in order to minimize pumping costs. The integrity of the beam tube was assured by helium mass spectrometer leak testing each component of the beam tube system prior to installation. Each 2 km long, isolatable beam tube module was then leak tested after completion
Search For A Permanent Electric Dipole Moment Using Atomic Indium
We propose indium (In) as a possible candidate for observing the permanent
electric dipole moment (EDM) arising from the violations of parity (P) and
time-reversal (T) symmetries. This atom has been laser cooled and therefore the
measurement of its EDM has the potential of improving on the current best EDM
limit for a paramagnetic atom which comes from thallium. We report the results
of our calculations of the EDM enhancement factor due to the electron EDM and
the ratio of the atomic EDM to the electron-nucleus scalar-pseudoscalar (S-PS)
interaction coupling constant in In in the framework of the relativistic
coupled cluster theory. It might be possible to get new limits for the electron
EDM and the S-PS CP violating coupling constant by combining the results of our
calculations with the measured value of the EDM of In when it is available.
These limits could have important implications for the standard model (SM) of
particle physics.Comment: 5 pages, 1 fig, Rapid Communicatio
The extensive nature of group quality
We consider groups of interacting nodes engaged in an activity as many-body,
complex systems and analyse their cooperative behaviour from a mean-field point
of view. We show that inter-nodal interactions rather than accumulated
individual node strengths dominate the quality of group activity, and give rise
to phenomena akin to phase transitions, where the extensive relationship
between group quality and quantity reduces. The theory is tested using
empirical data on quantity and quality of scientific research groups, for which
critical masses are determined.Comment: 6 pages, 6 figures containing 13 plots. Very minor changes to
coincide with published versio
Visualization design and verification of Ada tasking using timing diagrams
The use of timing diagrams is recommended in the design and testing of multi-task Ada programs. By displaying the task states vs. time, timing diagrams can portray the simultaneous threads of data flow and control which characterize tasking programs. This description of the system's dynamic behavior from conception to testing is a necessary adjunct to other graphical techniques, such as structure charts, which essentially give a static view of the system. A series of steps is recommended which incorporates timing diagrams into the design process. Finally, a description is provided of a prototype Ada Execution Analyzer (AEA) which automates the production of timing diagrams from VAX/Ada debugger output
Paleomagnetic Studies of Returned Samples from Mars
The red planet is a magnetic planet. Mars' iron-rich surface is strongly magnetized, likely dating back to the Noachian epoch when the surface may have been habitable. Paleomagnetic measurements of returned samples could transform our understanding of the Martian dynamo and its connection to climatic and planetary thermal evolution and provide powerful constraints on the preservation state of biosignatures in the samples
Keeping a Quantum Bit Alive by Optimized -Pulse Sequences
A general strategy to maintain the coherence of a quantum bit is proposed.
The analytical result is derived rigorously including all memory and
back-action effects. It is based on an optimized -pulse sequence for
dynamic decoupling extending the Carr-Purcell-Meiboom-Gill (CPMG) cycle. The
optimized sequence is very efficient, in particular for strong couplings to the
environment.Comment: 4 pages, 2 figures; revised version with additional references for
better context, more stringent discussio
Recommended from our members
Droplet deformation and pumping in AC electro-osmotic micropumps
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.This contribution deals with the pumping and deformation of oil in water droplets in alternating-current electro-osmotic micropumps. These micropumps are used to transport lowly conductive fluids through micro channels by means of a harmonically driven electrode array on the channel bottom. The periodic formation of an electric double layer above the electrodes results in an electro-osmotic flow, which
carries along adjacent fluid layers. In experiments we observed that droplets immersed in the carrier fluid are transported by the channel flow and periodically deformed when passing the electrodes. Due to the different
polarizability and conductivity of the droplet and the carrier fluid, dielectrophoretic forces act on the fluid droplet interface. These forces that are described by the Maxwell stress tensor increase with the electric field strength and attract the droplet towards the electrode. This contribution analyses the mechanisms of droplet pumping and deformation numerically by means of solving for the electric and the flow field to the two phases in the channel and by evaluating the dielectrophoretic forces on the droplet. A conservative level-set method is used to track the droplet surface accurately
Recommended from our members
Manufacturing Mechatronics Using Thermal Spray Shape Deposition
A new technology for manufacturing mechatronics is described. The technique is based on recursive
masking and deposition of thermally sprayed materials. Using these methods, mechanical structures
can be created that embed and interconnect electronic components. This results in highly integrated
mechatronic devices. A simple, electromechanical artifact was designed and produced to assess the
feasibility of these techniques. The details and limitations of this project will be discussed. Areas of
future research are identified which are aimed at realizing the full potential of this emerging manufacturing
process.Mechanical Engineerin
Design and Fabrication of Three-Dimensional Scaffolds for Tissue Engineering of Human Heart Valves
We developed a new fabrication technique for 3-dimensional scaffolds for tissue engineering of human heart valve tissue. A human aortic homograft was scanned with an X-ray computer tomograph. The data derived from the X-ray computed tomogram were processed by a computer-aided design program to reconstruct a human heart valve 3-dimensionally. Based on this stereolithographic model, a silicone valve model resembling a human aortic valve was generated. By taking advantage of the thermoplastic properties of polyglycolic acid as scaffold material, we molded a 3-dimensional scaffold for tissue engineering of human heart valves. The valve scaffold showed a deviation of only +/- 3-4% in height, length and inner diameter compared with the homograft. The newly developed technique allows fabricating custom-made, patient-specific polymeric cardiovascular scaffolds for tissue engineering without requiring any suture materials. Copyright (c) 2008 S. Karger AG, Base
- …