Ring resonator-based Tunable Optical Delay Line in LPCVD Waveguide Technology

Optical circuits providing a time delay to signals modulated on optical carriers are considered important for optical communication systems and phased array antennas. A continuously tunable optical delay line is demonstrated in low-cost CMOS compatible LPCVD planar waveguide technology. The device consists of three cascaded ringresonator all-pass filters with fixed circumference of 2 cm (delay of 0.12 ns and FSR of 8.4 GHz). The measured group delay ranges from 0 ns up to 1.2 ns with a bandwidth of 500 MHz and delay ripple smaller than 1 ps, which is in accordance with the calculations

Ring resonator-based single-chip 1x8 optical beam forming network in LPCVD waveguide technology

Optical ring resonators (ORRs) are good candidates to provide continuously tunable delay in beam forming networks (BFNs) for phased array antenna systems. \ud Delay and splitting/combining elements can be integrated on a single optical chip to form an OBFN. A state-of-the-art 1×8 OBFN chip has been fabricated in LPCVD waveguide technology.\ud It is designed with 1 input and 8 outputs, between which a binary-tree topology is used. A different number of ORRs (up to 7) are cascaded for each output.\ud In this paper, the principle of operation is explained and demonstrated by presenting measurements on the 1×8 OBFN chip

Optical beam forming for phased-array antennas

The activities of the Telecommunication Engineering (TE) group span the communications spectrum from copper cables, optical fibres, microwaves, radio and electromagnetic compatibility. Our research concentrates on optical signal processing and networks, mobile communications, microwave techniques and radiation from ICs and PCBs [1]. A considerable (and particularly interesting) part of it is related to optical beam forming for phased array antennas, using optical ring resonators.\ud In this article the theoretical basics and practical challenges of this interesting research topic will be summarized.\u

Phased array antenna steering using a ring resonator-based optical beam forming network

A novel beam steering mechanism for a phased array antenna receiver system is introduced. The core of the system is a ring resonator-based integrated optical beam forming network chip. Its principles are explained and demonstrated by presenting some measurement results. The system architecture around the chip is based on a combination of frequency down conversion, filter-based optical single sideband modulation and balanced coherent detection. It is proven that such an architecture has significant advantages with respect to a straightforward architecture using double sideband modulation and direct detection, namely relaxed bandwidth requirements on the optical modulators and detectors, reduced complexity and optical losses of the beam forming chip, and enhanced dynamic range

Novel ring resonator-based optical beamformer system and experimental results

A novel squint-free, continuously tunable beamformer mechanism for a phased array antenna system is proposed. It consists of filter-based optical single-sideband suppressed-carrier modulation, a fully integrated optical beam forming network using cascades of optical ring resonators as tunable delay elements, and balanced coherent optical detection. The proposed system brings advantages in optical bandwidth requirement, system complexity, and dynamic range, without introducing the problem of beam squint or limited tuning resolution. Some experimental results are presented in order to demonstrate the feasibility of the proposed concept

Low loss, high contrast optical waveguides based on CMOS compatible LPCVD processing

A new class of integrated optical waveguide structures is presented, based on low cost CMOS compatible LPCVD processing. This technology allows for medium and high index contrast waveguides with very low channel attenuation. The geometry is basically formed by a rectangular cross-section silicon nitride $(Si_{3}N_{4})$ filled with and encapsulated by silicon dioxide $(SiO_{2})$. The birefringence and minimal bend radius of the waveguide is completely controlled by the geometry of the waveguide layer structures. Experiments on typical geometries will be presented, showing excellent characteristics (channel attenuation ≤0.06 dB/cm, IL ≤0.6 dB, PDL ≤0.2 dB, Bg «1 x $10^{-3}$, bend radius ≤500 μm)

A family of linearizable recurrences with the Laurent property

We consider a family of non-linear recurrences with the Laurent property. Although these recurrences are not generated by mutations in a cluster algebra, they fit within the broader framework of Laurent phenomenon algebras, as introduced recently by Lam and Pylyavskyy. Furthermore, each member of this family is shown to be linearizable in two different ways, in the sense that its iterates satisfy both a linear relation with constant coefficients and a linear relation with periodic coefficients. Associated monodromy matrices and first integrals are constructed, and the connection with the dressing chain for Schrödinger operators is also explained

Stepwise Adsorption of Alkoxy-Pyrene Derivatives onto a Lamellar, Non-Porous Naphthalenediimide-Template on HOPG

The development of new strategies for the preparation of multicomponent supramolecular assemblies is a major challenge on the road to complex functional molecular systems. Here we present the use of a non-porous self-assembled monolayer from uC33-NDI-uC33, a naphthalenediimide symmetrically functionalized with unsaturated 33 carbon-atom-chains, to prepare bicomponent supramolecular surface systems with a series of alkoxy-pyrene (PyrOR) derivatives at the liquid/HOPG interface. While previous attempts at directly depositing many of these PyrOR units at the liquid/HOPG interface failed, the multicomponent approach through the uC33-NDI-uC33 template enabled control over molecular interactions and facilitated adsorption. The PyrOR deposition restructured the initial uC33-NDI-uC33 monolayer, causing an expansion in two dimensions to accommodate the guests. As far as we know, this represents the first example of a non-porous or non-metal complex-bearing monolayer that allows the stepwise formation of multicomponent supramolecular architectures on surfaces

A compact and reconfigurable silicon nitride time-bin entanglement circuit

Photonic chip based time-bin entanglement has attracted significant attention because of its potential for quantum communication and computation. Useful time-bin entanglement systems must be able to generate, manipulate and analyze entangled photons on a photonic chip for stable, scalable and reconfigurable operation. Here we report the first time-bin entanglement photonic chip that integrates time-bin generation, wavelength demultiplexing and entanglement analysis. A two-photon interference fringe with an 88.4% visibility is measured (without subtracting any noise), indicating the high performance of the chip. Our approach, based on a silicon nitride photonic circuit, which combines the low-loss characteristic of silica and tight integration features of silicon, paves the way for scalable real-world quantum information processors.Comment: 4 pages, 5 figure

On the General Solution of the Heideman–Hogan Family of Recurrences

We consider a family of nonlinear rational recurrences of odd order which was introduced by Heideman and Hogan, and recently rediscovered in the theory of Laurent phenomenon algebras (a generalization of cluster algebras). All of these recurrences have the Laurent property, implying that for a particular choice of initial data (all initial values set to 1) they generate an integer sequence. For these particular sequences, Heideman and Hogan gave a direct proof of integrality by showing that the terms of the sequence also satisfy a linear recurrence relation with constant coefficients. Here we present an analogous result for the general solution of each of these recurrences