593 research outputs found

    Amorphous carbon film deposition on inner surface of tubes using atmospheric pressure pulsed filamentary plasma source

    Full text link
    Uniform amorphous carbon film is deposited on the inner surface of quartz tube having the inner diameter of 6 mm and the outer diameter of 8 mm. A pulsed filamentary plasma source is used for the deposition. Long plasma filaments (~ 140 mm) as a positive discharge are generated inside the tube in argon with methane admixture. FTIR-ATR, XRD, SEM, LSM and XPS analyses give the conclusion that deposited film is amorphous composed of non-hydrogenated sp2 carbon and hydrogenated sp3 carbon. Plasma is characterized using optical emission spectroscopy, voltage-current measurement, microphotography and numerical simulation. On the basis of observed plasma parameters, the kinetics of the film deposition process is discussed

    A systematic correlation between two-dimensional flow topology and the abstract statistics of turbulence

    Full text link
    Velocity differences in the direct enstrophy cascade of two-dimensional turbulence are correlated with the underlying flow topology. The statistics of the transverse and longitudinal velocity differences are found to be governed by different structures. The wings of the transverse distribution are dominated by strong vortex centers, whereas, the tails of the longitudinal differences are dominated by saddles. Viewed in the framework of earlier theoretical work this result suggests that the transfer of enstrophy to smaller scales is accomplished in regions of the flow dominated by saddles.Comment: 4 pages, 4 figure

    Hysteresis at low Reynolds number: the onset of 2D vortex shedding

    Full text link
    Hysteresis has been observed in a study of the transition between laminar flow and vortex shedding in a quasi-two dimensional system. The system is a vertical, rapidly flowing soap film which is penetrated by a rod oriented perpendicular to the film plane. Our experiments show that the transition from laminar flow to a periodic K\'arm\'an vortex street can be hysteretic, i.e. vortices can survive at velocities lower than the velocity needed to generate them.Comment: RevTeX file 4 pages + 5 (encapsulated postscript) figures. to appear in Phys.Rev.E, Rapid Communicatio

    Are Steadily Moving Crystals Unstable?

    Get PDF
    We study the dynamics of small fluctuations about the uniform state of a crystal moving through a dissipative medium, e.g. a sedimenting colloidal crystal or a moving flux lattice, using a set of continuum equations for the displacement fields, and a one-dimensional driven lattice-gas model for the coupled concentration and tilt fields. For the colloidal crystal we predict a continuous nonequilibrium phase transition to a clumped state above a critical Peclet number.Comment: 4 pages, revtex, 2 .eps figures, uses epsf.sty; To be published in Phys. Rev. Lett. This version is substantially rewritten but the essential content is the same as befor

    Vorticity statistics in the two-dimensional enstrophy cascade

    Get PDF
    We report the first extensive experimental observation of the two-dimensional enstrophy cascade, along with the determination of the high order vorticity statistics. The energy spectra we obtain are remarkably close to the Kraichnan Batchelor expectation. The distributions of the vorticity increments, in the inertial range, deviate only little from gaussianity and the corresponding structure functions exponents are indistinguishable from zero. It is thus shown that there is no sizeable small scale intermittency in the enstrophy cascade, in agreement with recent theoretical analyses.Comment: 5 pages, 7 Figure

    Introducing Summative Progress Testing in Radiology Residency: Little Change in Residents’ Test Results After Transitioning from Formative Progress Testing

    Get PDF
    Introduction: Educational effects of transitioning from formative to summative progress testing are unclear. Our purpose was to investigate wheth

    Fourteen years of progress testing in radiology residency training: experiences from The Netherlands

    Get PDF
    Objectives: To describe the development of the Dutch Radiology Progress Test (DRPT) for knowledge testing in radiology residency training in The Netherlands from its start in 2003 up to 2016. Methods: We reviewed all DRPTs conducted since 2003. We assessed key changes and events in the test throughout the years, as well as resident participation and dispensation for the DRPT, test reliability and discriminative power of test items. Results: The DRPT has been conducted semi-annually since 2003, except for 2015 when one digital DRPT failed. Key changes in these years were improvements in test analysis and feedback, test digitalization (2013) and inclusion of test items on nuclear medicine (2016). From 2003 to 2016, resident dispensation rates increased (Pearson’s correlation coefficient 0.74, P-value <0.01) to maximally 16 %. Cronbach´s alpha for test reliability varied between 0.83 and 0.93. The percentage of DRPT test items with negative item-rest-correlations, indicating relatively poor discriminative power, varied between 4 % and 11 %. Conclusions: Progress testing has proven feasible and sustainable in Dutch radiology residency training, keeping up with innovations in the radiological profession. Test reliability and discriminative power of test items have remained fair over the years, while resident dispensation rates have increased. Key Points: • Progress testing allows for monitoring knowledge development from novice to senior trainee.• In postgraduate medical training, progress testing is used infrequently.• Progress testing is feasible and sustainable in radiology residency training

    Reference light source for luminance and illuminance photometry

    Full text link

    Turbulence and passive scalar transport in a free-slip surface

    Full text link
    We consider the two-dimensional (2D) flow in a flat free-slip surface that bounds a three-dimensional (3D) volume in which the flow is turbulent. The equations of motion for the two-dimensional flow in the surface are neither compressible nor incompressible but strongly influenced by the 3D flow underneath the surface. The velocity correlation functions in the 2D surface and in the 3D volume scale with the same exponents. In the viscous subrange the amplitudes are the same, but in the inertial subrange the 2D one is reduced to 2/3 of the 3D amplitude. The surface flow is more strongly intermittent than the 3D volume flow. Geometric scaling theory is used to derive a relation between the scaling of the velocity field and the density fluctuations of a passive scalar advected on the surface.Comment: 11 pages, 10 Postscript figure

    Comparison of laparoscopic versus robot-assisted versus transanal total mesorectal excision surgery for rectal cancer:a retrospective propensity score-matched cohort study of short-term outcomes

    Get PDF
    BACKGROUND: Laparoscopic total mesorectal excision (TME) surgery for rectal cancer has important technical limitations. Robot-assisted and transanal TME (TaTME) may overcome these limitations, potentially leading to lower conversion rates and reduced morbidity. However, comparative data between the three approaches are lacking. The aim of this study was to compare short-term outcomes for laparoscopic TME, robot-assisted TME and TaTME in expert centres. METHODS: Patients undergoing rectal cancer surgery between 2015 and 2017 in expert centres for laparoscopic, robot-assisted or TaTME were included. Outcomes for TME surgery performed by the specialized technique in the expert centres were compared after propensity score matching. The primary outcome was conversion rate. Secondary outcomes were morbidity and pathological outcomes. RESULTS: A total of 1078 patients were included. In rectal cancer surgery in general, the overall rate of primary anastomosis was 39.4, 61.9 and 61.9 per cent in laparoscopic, robot-assisted and TaTME centres respectively (P < 0.001). For specialized techniques in expert centres excluding abdominoperineal resection (APR), the rate of primary anastomosis was 66.7 per cent in laparoscopic, 89.8 per cent in robot-assisted and 84.3 per cent in TaTME (P < 0.001). Conversion rates were 3.7 , 4.6 and 1.9 per cent in laparoscopic, robot-assisted and TaTME respectively (P = 0.134). The number of incomplete specimens, circumferential resection margin involvement rate and morbidity rates did not differ. CONCLUSION: In the minimally invasive treatment of rectal cancer more primary anastomoses are created in robotic and TaTME expert centres
    corecore