HEAT TRANSFER WITH LAMINAR FLOW IN CONCENTRIC ANNULI WITH CONSTANT AND VARIABLE WALL TEMPERATURE AND HEAT FLUX

Heat transfer with laminar flow in concentric annuli with constant and variable wall temperature and heat flu

Spent fuel dry storage technology development: report of consolidated thermal data

Experiments indicate that PWR fuel with decay heat levels in excess of 2 kW could be stored in isolated drywells in Nevada Test Site soil without exceeding the current fuel clad temperature limit (715{sup 0}F). The document also assesses the ability to thermally analyze near-surface drywells and above-ground storage casks and it identifies analysis development areas. It is concluded that the required analysis procedures, computer programs, etc., are already developed and available. Analysis uncertainties, however, still exist but they lie mainly in the numerical input area. Soil thermal conductivity, of primary importance in analysis, requires additional study to better understand the soil drying mechanism and effects of moisture. Work is also required to develop an internal canister subchannel model. In addition, the ability of the overall drywell thermal model to accommodate thermal interaction effects between adjacent drywells should be confirmed. In the experimental area, tests with two BWR spent fuel assemblies encapsulated in a single canister should be performed to establish the fuel clad and canister temperature relationship. This is needed to supplement similar experimental work which has already been completed with PWR fuel

A theoretical investigation of the aerodynamics of slender wing-body combinations exhibiting leading-edge separation

Theoretical investigation of aerodynamics of slender wing-body combinations exhibiting leading edge separatio

Lean and rich aging of a Cu/SSZ-13 catalyst for combined lean NO x trap (LNT) and selective catalytic reduction (SCR) concept

\ua9 2019 The Royal Society of Chemistry. In the combined lean NO x trap (LNT) and selective catalytic reduction (SCR) concept, the SCR catalyst can be exposed to rich conditions during deSO x of the LNT. Aging of Cu/SSZ-13 SCR catalysts, deposited on a cordierite monolith, was therefore studied in rich, lean and cycling lean/rich operations at 800 \ub0C (lean condition: 500 ppm NO, 8% O 2 , 10% H 2 O and 10% CO 2 ; rich condition: 500 ppm NO, 1% H 2 , 10% H 2 O and 10% CO 2 ). The structure of the catalyst was investigated by X-ray diffraction (XRD), surface area measurements and scanning transmission electron microscopy (STEM). In general, aging decreased the SCR activity and NH 3 oxidation. However, rich conditions showed a very rapid and intense deactivation, while lean aging led to only a small low-temperature activity decrease. The XRD results showed no sign of structure collapse, but the number of active sites, as titrated by NH 3 temperature-programed desorption (NH 3 -TPD) and in situ DRIFTS, revealed an important loss of acid sites. NH 3 storage was significantly more depleted after rich aging than after lean aging. The Lewis sites, corresponding to exchange Cu 2+ , were preserved to some extent in lean conditions. Lean aging also decreased the enthalpy of NH 3 adsorption from -158 kJ mol -1 to -136 kJ mol -1 . Moreover, a comparison of aging in lean-rich cycling conditions with aging only in rich conditions revealed that adding lean events did not hinder or reverse the deactivation, and it was mainly the time in rich conditions that determined the extent of the deactivation. The STEM images coupled with elemental analysis revealed the formation of large Cu particles during rich aging. Conversely, Cu remained well dispersed after lean aging. These results suggest that the copper migration and agglomeration in large extra-framework particles, accelerated by the action of hydrogen, caused the observed severe deactivation

System Design of the ATLAS Absolute Luminosity Monitor

The ATLAS absolute luminosity monitor is composed of 8 roman pots symmetrically located in the LHC tunnel. Each pot contains 23 multi anode photomultiplier tubes, and each one of those is fitted with a front-end assembly called PMF. A PMF provides the high voltage biasing of the tube, the frontend readout chip and the readout logic in a very compact arrangement. The 25 PMFs contained in one roman pot are connected to a motherboard used as an interface to the backend electronics. The system allows to configure the front-end electronics from the ATLAS detector control system and to transmit the luminosity data over Slink

Spent fuel dry storage technology development: report of consolidated thermal data

Experiments indicate that PWR fuel with decay heat levels in excess of 2 kW could be stored in isolated drywells in Nevada Test Site soil without exceeding the current fuel clad temperature limit (715{sup 0}F). The document also assesses the ability to thermally analyze near-surface drywells and above-ground storage casks and it identifies analysis development areas. It is concluded that the required analysis procedures, computer programs, etc., are already developed and available. Analysis uncertainties, however, still exist but they lie mainly in the numerical input area. Soil thermal conductivity, of primary importance in analysis, requires additional study to better understand the soil drying mechanism and effects of moisture. Work is also required to develop an internal canister subchannel model. In addition, the ability of the overall drywell thermal model to accommodate thermal interaction effects between adjacent drywells should be confirmed. In the experimental area, tests with two BWR spent fuel assemblies encapsulated in a single canister should be performed to establish the fuel clad and canister temperature relationship. This is needed to supplement similar experimental work which has already been completed with PWR fuel