Energy and economic analysis of a residential Solar Organic Rankine plant

To answer the actual energy, water, economic, social and environmental challenges, renewable, distributed power plants need to be developed. Among renewables, solar tri-generative power plants can be a solution where there is big low temperature heating/cooling demand and small electricity demand, like many residential and industrial utilities. In this case, solar thermal plants can produce thermal energy with low cost and high efficiency. The higher temperature heat not needed by the user can be exploited via Organic Rankine Cycle to produce electrical energy and desalinized water via reverse osmosis. The present paper analyses, via TRNSYS simulation, a system composed of 50 m2 of CPC solar thermal collectors, 3 m3 of thermal storage, a synthetic heat transfer fluid, 3 kWe ORC, 8 kWth absorber, 200 l/h direct reverse osmosis desalination device. The system is able to produce power, heating/cooling and fresh water needs for a residential house. Although system’s components are well known technologies, the integration to a efficient and economic working system is still a challenge. Global energy and economic analyses have been performed. Low temperature heating/cooling terminals allow to increase not only the use of thermal energy but also the ORCand absorber efficiency. ORC-Absorber configuration and relative fluids and temperatures are central. Government support and/or cost reduction of 30% are necessary to have positive NPV and acceptable PBT and IR

Experimental tests to recover the photovoltaic power by battery system

The uncertainty and variability of the Renewable Energy Sources (RES) power plants within the power grid is an open issue. The present study focuses on the use of batteries to overcome the limitations associated with the photovoltaic inverter operation, trying to maximize the global energy produced. A set of switches, was placed between a few photovoltaic modules and a commercial inverter, capable to change configuration of the plant dynamically. Such system stores the power that the inverter is not able to let into the grid inside batteries. At the base of this optimization, there is the achievement of two main configurations in which the batteries and the photovoltaic modules are electrically connected in an appropriate manner as a function of inverter efficiency and thus solar radiation. A control board and the relative program, to change the configuration, was designed and implemented, based on the value of the measured radiation, current, batteries voltage, and calculated inverter efficiency. Finally from the cost and impact analysis we can say that, today the technology of lithium batteries, for this application, is still too expensive in comparison with lead-acid batteries

State of art of small scale solar powered ORC systems: a review of the different typologies and technology perspectives

Abstract Solar thermoelectric, even for small sizes, is continuing to garner more attention, by virtue of maturation of small size organic Rankine cycle generators, and of small size absorption chiller even if cost and reliability are still not optimal. Indeed, solar thermal power technology improvement would consent to stimulate an ambit already present in Europe and Italy with a well-known tradition and established leadership and efforts focused on a single solar technology would bring to positive effects concerning controllable electric and thermal energy uses. In this context, the present work tries to summarize the possible cycles and fluids that can be applied in a small solar thermal power plant. Despite a plethora of simulated and experimental cycles and fluids, the simplest cycle using near isentropic fluids seems to be the best choice for a small ORC-based CHP system, even if particular attention has to be done to all the sizing parameters (electricity, heating and cooling demand; area and type of solar collector; flow and temperature of the thermal carrier; flow, temperature and pressure of the working fluid; storage volumes; etc.). Indeed, efficiency and reliability of the reported systems are very different, but, it seems that global efficiency of even more than 10% and global cost of even less than 10,000 €/kW can be obtained even at size of few kW if adequate systems are constructed and managed

Parametric experimental tests of steam gasification of pine wood in a fluidized bed reactor

Among Renewable Energy Sources (RES), biomass represent one of the most common and suitable solution in order to contribute to the global energy supply and to reduce greenhouse gases (GHG) emissions. The disposal of some residual biomass, as pruning from pine trees, represent a problem for agricultural and agro-industrial sectors. But if the residual biomass are used for energy production can become a resource. The most suitable energy conversion technology for the above-mentioned biomass is gasification process because the high C/N ratio and the low moisture content, obtained from the analysis. In this work a small-pilot bubbling-bed gasification plant has been designed, constructed and used in order to obtain, from the pine trees pruning, a syngas with low tar and char contents and high hydrogen content. The activities showed here are part of the activities carried out in the European 7FP UNIfHY project. In particular the aim of this work is to develop experimental test on a bench scale steam blown fluidized bed biomass gasifier. These tests will be utilized in future works for the simulations of a pilot scale steam fluidized bed gasifier (100 kWth) fed with different biomass feedstock. The results of the tests include produced gas and tar composition as well gas, tar and char yield. Tests on a bench scale reactor (8 cm I.D.) were carried out varying steam to biomass ratio from 0.5, 0.7 and 1 to 830°C

Evaluation of global impact models' ability to reproduce runoff characteristics over the central United States

The central United States experiences a wide array of hydrological extremes, with the 1993, 2008, 2013, and 2014 flooding events and the 1988 and 2012 droughts representing some of the most recent extremes, and is an area where water availability is critical for agricultural production. This study aims to evaluate the ability of a set of global impact models (GIMs) from the Water Model Intercomparison Project to reproduce the regional hydrology of the central United States for the period 1963–2001. Hydrological indices describing annual daily maximum, medium and minimum flow, and their timing are extracted from both modeled daily runoff data by nine GIMs and from observed daily streamflow measured at 252 river gauges. We compare trend patterns for these indices, and their ability to capture runoff volume differences for the 1988 drought and 1993 flood. In addition, we use a subset of 128 gauges and corresponding grid cells to perform a detailed evaluation of the models on a gauge-to-grid cell basis. Results indicate that these GIMs capture the overall trends in high, medium, and low flows well. However, the models differ from observations with respect to the timing of high and medium flows. More specifically, GIMs that only include water balance tend to be closer to the observations than GIMs that also include the energy balance. In general, as it would be expected, the performance of the GIMs is the best when describing medium flows, as opposed to the two ends of the runoff spectrum. With regards to low flows, some of the GIMs have considerably large pools of zeros or low values in their time series, undermining their ability in capturing low flow characteristics and weakening the ensemble's output. Overall, this study provides a valuable examination of the capability of GIMs to reproduce observed regional hydrology over a range of quantities for the central United States

State of Art of Small Scale Biomass Gasification Power Systems: A Review of the Different Typologies

The security of supply and climate change issues and the linked recent growth of the local power generation by means of renewable energies technologies are providing real opportunities for the development of small scale biomass gasification systems. The present paper reports the state of art of the small scale gasification power plants. Initial attention has been given to the different biomass feedstock suitable for gasification, focusing on residues with low cost and low environmental impact. Then the two major typologies of gasifiers (fixed and fluidized bed) have been analyzed in terms of raw gas yield, composition and tar and particulate content. The different cold and hot raw gas conditioning systems, highlighting their compatibility with the different gasification system, are described. High efficiency examples of power production by means of internal combustion engine, micro gas turbine, Solid Oxide Fuel Cell or a mix of them, both as realized plants and process simulated ones, have been then reported. The paper provides an overview of the different power plants in terms of efficiency, reliability and cost. © 2013 The Authors. Published by Elsevier Ltd. Selection and peer-review under responsibility of ATI NAZIONALE

Intense precipitation events associated with landfalling tropical cyclones in response to a warmer climate and increased CO2

In this work the authors investigate possible changes in the intensity of rainfall events associated 28 with tropical cyclones (TCs) under idealized forcing scenarios, including a uniformly warmer climate, with a special focus on landfalling storms. A new set of experiments designed within the U.S. CLIVAR Hurricane Working Group allows disentangling the relative role of changes in atmospheric carbon dioxide from that played by sea surface temperature (SST) in changing the amount of precipitation associated with TCs in a warmer world. Compared to the present day simulation, we found an increase in TC precipitation under the scenarios involving SST increases. On the other hand, in a CO2 doubling-only scenario, the changes in TC rainfall are small and we found that, on average, TC rainfall tends to decrease compared to the present day climate. The results of this study highlight the contribution of landfalling TCs to the projected increase in the precipitation changes affecting the tropical coastal regions

Sensitivity of Tropical Cyclone Rainfall to Idealized Global Scale Forcings

Heavy rainfall and flooding associated with tropical cyclones (TCs) are responsible for a large number of fatalities and economic damage worldwide. Despite their large socio-economic impacts, research into heavy rainfall and flooding associated with TCs has received limited attention to date, and still represents a major challenge. Our capability to adapt to future changes in heavy rainfall and flooding associated with TCs is inextricably linked to and informed by our understanding of the sensitivity of TC rainfall to likely future forcing mechanisms. Here we use a set of idealized high-resolution atmospheric model experiments produced as part of the U.S. CLIVAR Hurricane Working Group activity to examine TC response to idealized global-scale perturbations: the doubling of CO2, uniform 2K increases in global sea surface temperature (SST), and their combined impact. As a preliminary but key step, daily rainfall patterns of composite TCs within climate model outputs are first compared and contrasted to the observational records. To assess similarities and differences across different regions in response to the warming scenarios, analyses are performed at the global and hemispheric scales and in six global TC ocean basins. The results indicate a reduction in TC daily precipitation rates in the doubling CO2 scenario (on the order of 5% globally), and an increase in TC rainfall rates associated with a uniform increase of 2K in SST (both alone and in combination with CO2 doubling; on the order of 10-20% globally)

Uncertainties in projected runoff over the conterminous United States

Projections of runoff from global multi-model ensembles provide a valuable basis for the estimation of future hydrological extremes. However, projections suffer from uncertainty that originates from different error sources along the modeling chain. Hydrological impact studies have generally partitioned these error sources into global impact and global climate model (GIM and GCM, respectively) uncertainties, neglecting other sources, including scenarios and internal variability. Using a set of GIMs driven by GCMs under different representative concentration pathways (RCPs), this study aims to partition the uncertainty of future flows coming from GIMs, GCMs, RCPs, and internal variability over the CONterminous United States (CONUS). We focus on annual maximum, median, and minimum runoff, analyzed decadally over the twenty-first century. Results indicate that GCMs and GIMs are responsible for the largest fraction of uncertainty over most of the study area, followed by internal variability and to a smaller extent RCPs. To investigate the influence of the ensemble setup on uncertainty, in addition to the full ensemble, three ensemble configurations are studied using fewer GIMs (excluding least credible GIMs in runoff representation and GIMs accounting for vegetation and CO2 dynamics), and excluding intermediate RCPs. Overall, the use of fewer GIMs has a minor impact on uncertainty for low and medium flows, but a substantial impact for high flows. Regardless of the number of pathways considered, RCPs always play a very small role, suggesting that improvement of GCMs and GIMs and more informed ensemble selections can yield a reduction of projected uncertainties