Performance evaluation of a DC-AC inverter controlled with ZAD-FPIC

Introduction− Power converters are used in mi-crogrids to transfer power to the load with a regulated voltage. However, the DC-AC converters present distor-tions in the waveform that can be improved with the help of real-time controllers.Objective−Evaluate the response in alternating cur-rent of the buck converter controlled with the ZAD-FPIC technique.Methodology−Based on the differential equations that describe the buck power converter, the ZAD and FPIC controllers are designed. Afterwards, simulations of the complete controlled system are made using Simulink of MATLAB. Then, the system is implemented experi-mentally and the controller is executed in real-time with the help of a DS1104 from dSPACE. In the end, several tests are carried out to check the effectiveness of the controller.Results− The results show that the controller allows good stability against different variations in the system and in the load.Conclusions−The ZAD-FPIC technique controls the variable and tracks changes in the waveform, magni-tude, and frequency of the reference signal. The control-ler presents good stability to different tests, tracking the reference signal after each event.Introducción− Los convertidores de potencia son utili-zados en las micro redes para transferir la potencia a la carga con una tensión regulada. Sin embargo, los conver-tidores DC-AC presentan distorsiones en la forma de onda que pueden ser mejoradas con la ayuda de controladores en tiempo real.Objetivo− Evaluar la respuesta en corriente alterna del convertidor buck controlado con la técnica ZAD-FPIC.Metodología− Se parte de las ecuaciones diferenciales que describen el convertidor de potencia buck, luego se diseñan los controladores ZAD y FPIC, se hacen simu-laciones del sistema completo controlado en Simulink de Matlab, se implementa el sistema de forma experimental y el controlador se ejecuta en tiempo real con la ayuda de una DS1104 de la empresa dSPACE, al final se realizan varias pruebas para comprobar la efectividad del controlador.Resultados− Los resultados muestran que el controlador permite que una buena estabilidad contra diversas varia-ciones en el sistema y en la carga.Conclusiones− La técnica ZAD-FPIC controla la varia-ble y realiza seguimiento ante cambios en la forma de onda, magnitud y frecuencia de la señal de referencia. El controlador presenta buena estabilidad ante diferentes pruebas, siguiendo la señal de referencia después de cada event

Maxillary sinus augmentation with three different biomaterials: Histological, histomorphometric, clinical, and patient-reported outcomes from a randomized controlled trial

Background: Lateral maxillary sinus augmentation (MSA) is a predictable bone regeneration technique in case of atrophy of the posterior-upper maxilla. Aimed at obtaining quantity and quality of bone suitable for receiving osseointegrated implants, its success is largely due to the skill of the surgeon, but also to the characteristics of the biomaterial used. Methods: Twenty-four patients needing MSA were included in the study. The patients were randomly allocated to three different groups: anorganic bovine bone mineral as control, tricalcium phosphate with or without hyaluronic acid (HA) as test groups. Nine months after MSA, bone biopsies were harvested for the histomorphometric analysis. Secondary outcomes were mean bone gain, intraoperative and postoperative complications, implant insertion torque, implant failure, and patient-reported outcome measures. Results: Although the percentage of new bone was not statistically different between the three groups (P =.191), the percentages of residual biomaterial was significantly higher (P <.000) and nonmineralized tissue significantly lower (P <.000) in the control than in the test groups. Test groups did not differ significantly from each other for all histomorphometric parameters. The implant insertion torque was significantly higher in the control group (P <.0005). The rest of the secondary outcomes were not significantly different between the groups. Conclusion: MSA is a safe and predictable procedure in terms of histological, clinical, and PROAMs, regardless of the biomaterial used. The addition of HA did not influence the outcomes

Tratamento com implantes dentários pós-extração.

Introduction: The aim of the present study was to show the results of treatment with dental implants inserted immediately after extraction. Methods: 22 patients with unitary, partial or total tooth loss were treated with 82 Microdent ® implants with etched and acid-etched surfaces. All implants were inserted immediately after the corresponding extraction. The implants were loaded after a healing period of 3 months in the mandible or 6 months in the upper mandible. Results: Clinical findings indicate survival and implant success of 97.6%. 2 implants were lost during the healing period. 73.2% of the implants were inserted in the  maxilla, while 26.8% in the mandible. After an average functional load period of 12 months, there were no late complications. Conclusions: This study indicates that dental implants inserted immediately after extraction can be a predictable and successful alternative to the implant.  Introdução: O objetivo do presente estudo foi mostrar os resultados do tratamento com implantes dentários inseridos imediatamente após a extração. Métodos: 22 pacientes com perda dentária unitária, parcial ou total foram tratados com 82 implantes Microdent ® com superfície tratada com ácidos. Todos os implantes foram inseridos imediatamente após a extração correspondente. Os implantes foram carregados após um período de cicatrização de 3 meses na mandíbula ou 6 meses na maxila. Resultados: Os achados clínicos indicam sobrevivência e sucesso dos implantes de 97,6%. 2 implantes foram perdidos durante o período de cicatrização. 73,2% dos implantes foram inseridos na maxila, enquanto 26,8% na mandíbula. Após um período médio de carga funcional de 12 meses, não houve complicações tardias. Conclusões: Este estudo indica que implantes dentários inseridos imediatamente após a extração podem ser uma alternativa previsível e bem-sucedida ao implante

Unified Ontology for a Holonic Manufacturing System

[ES] Los sistemas holónicos de manufactura son integrados por holones capaces de comportarse de una manera autónoma, cooperativa, auto-organizada y reconfigurable para adoptar estructuras distintas en condiciones de operación normales y de emergencia. Dichos holones cuentan con: (1) una representación del conocimiento, (2) una unidad de control distribuido y descentralizado, y (3) un módulo de coordinación. El objeto de interés de la presente investigación es la concepción de una ontología unificada en el dominio de manufactura, que garantice los requisitos en el formalismo del modelo de conocimiento de un sistema holónico. A diferencia de los modelos ontológicos encontrados en la literatura, el esquema de representación del conocimiento propuesto integra roles y comportamientos, mismos que son validados mediante un caso de estudio de una celda de manufactura de un laboratorio universitario. Los resultados muestran que al hacer uso de un vocabulario común, es posible representar coherentemente el conocimiento para que toda clase de holones en una holarquía puedan intercambiar, compartir y recuperar información.[EN] Holonic manufacturing systems are formed by holons that are capable of behaving in an autonomous, cooperative, selforganized and reconfigurable way to adopt dierent structures under normal and emergency operating conditions. These holons possess: (1) a representation of the world in which they live, (2) a distributed and decentralized control unit, and (3) a coordination module. The object of interest of the present research is the conception of a unified ontology in manufacturing domain, that guarantees the requirements in the formalism of the knowledge model of a holonic system. Unlike the ontological models found in the literature, the proposed knowledge representation scheme integrates roles and behaviors, which are validated through a case study of a manufacturing cell from a university laboratory. The results show that by using a common vocabulary, it is possible to represent knowledge coherently so that all kinds of holons in a holarchy can exchange, share and retrieve information. Simón-Marmolejo, I.; López-Ortega, O.; Ramos-Velasco, LE.; Ortiz-Domínguez, M. (2018). Ontología Unificada para un Sistema Holónico de Manufactura. Revista Iberoamericana de Automática e Informática industrial. 15(2):217-230. https://doi.org/10.4995/riai.2017.8851OJS217230152Araúzoa, J. A., del Olmo-Martínez, R., Laviós, J. J., de Benito-Martín, J. J., 2015. Programación y control de sistemas de fabricación flexibles: un enfoque holónico. RIAI - Revista iberoamericana de automática e informática industrial 12 (1), 58-68, https://doi.org/10.1016/j.riai.2014.11.005Barbosa, J., Leitao, P., Adam, E., Trentesaux, D., 2015. Dynamic selforganization in holonic multi-agent manufacturing systems: The ADACOR evolution. Computers in industry 66, 99-111. https://doi.org/10.1016/j.compind.2014.10.011Bellifemine, F., Caire, G., Greenwood, D., 2004. Developing multi-agent systems with JADE. Wiley Series in Agent Technology, Series Editor: Wooldridge, M., Liverpool University, UK.Blanc, P., Demongodin, I., Castagna, P., 2008. A holonic approach for manufacturing execution system design: An industrial application. Engineering applications of artificial intelligence 21 (3), 315-330, https://doi.org/10.1016/j.engappai.2008.01.007Borgo, S., Leitao, P., 2007. Foundations for a core ontology of manufacturing. In: Sharma, R., Kishore, R., Ramesh, R. (Eds.), Ontologies, A Handbook of principles, concepts and aplications in information systems. Springer Science +Business Media, NY, USA, Ch. 27, pp. 751-775, https://doi.org/10.1007/978-0-387-37022-4Botti, V., Giret, A., 2008. ANEMONA, A multi-agent methodology for holonic manufacturing systems. Springer: Departamento de sistemas informáticos y computación (DSIC), Valencia, Spain, https://doi.org/10.1007/978-1-84800-310-1Bravo, C., Aguilar-Castro, J., Ríos, A., Aguilar-Martin, J., Rivas, F., 2011. Arquitectura basada en inteligencia artificial distribuida para la gerencia integrada de producción industrial. RIAI - Revista iberoamericana de automática e informática industrial 8 (4), 405-417. https://doi.org/10.1016/j.riai.2011.09.013Brussel, H. V.,Wyns, J., Valckenaers, P., Bongaerts, L., Peeters, P., 1998. Reference architecture for holonic manufacturing systems: PROSA. Computers in industry 37 (3), 255-274, https://doi.org/10.1016/S0166-3615(98)00102-XCaire, G., Cabanillas, D., April 2010. JADE TUTORIAL, application-defined content languages and ontologies. Support provided by JADE, Italia S.p.A, 9th Edition. URL: http://jade.tilab.com/doc/tutorials/CLOntoSupport.pdfCheca, D., Rojas, O., 2014. Ontología para los sistemas holónicos de manufactura basados en la unidad de producción. Revista colombiana de tecnologías de avanzada 1 (23), 134-141. URL: http://www.academia.edu/8676921/ONTOLOÍA_PARA_LOS_SISTEMAS_HOLÓNICOS_DE_MANUFACTURA_BASADOS_EN_LA_UNIDAD_DE_PRODUCCIÓNChristensen, J. H., December 1994. Holonic manufacturing systems: Initial architecture and standards directions. In: At first European Conference on Holonic Manufacturing Systems. Hannover, Germany, pp. 1-20. URL: http://holobloc.com/papers/hannover.pdfCorcho, O., Fernández-López, M., Gómez-Pérez, A., 2003. Methodologies, tools and languages for building ontologies. Where is their meeting point? Data & Knowledge Engineering 46 (1), 41-64. https://doi.org/10.1016/S0169-023X(02)00195-7Correa da Silva, F. S., Vasconcelos, W. W., Robertson, D. S., Brilhante, V., de Melo, A. C. V., M., F., Agustí, J., 2002. On the insufficiency of ontologies: problems in knowledge sharing and alternative solution. Knowledge-Base Systems 15 (3), 147-167. https://doi.org/10.1016/S0950-7051(01)00152-6de las Morenas, J., García, A., Martínez, F., P., G., 2015. Implementación del control en planta de un centro de distribución automatizado mediante agentes físicos y RFID. RIAI - Revista iberoamericana de automática e informática industrial 12 (1), 25-35. https://doi.org/10.1016/j.riai.2014.11.002Fernández, M., Gómez-Pérez, A., Uristo, N., 1997. Methontology: From ontological art towards ontological engineering. AAAI Technical Report, 33-40. URL: http://oa.upm.es/5484/Giraldo, G., Arboleda, A., Zapata, G., 2013. Enfoque ontológico para detectar conceptos holónicos en las organizaciones. Revista facultad de ingeniería Universidad de Antioquia 69, 53-66. URL: http://www.redalyc.org/articulo.oa?id=43029812004Gómez-Pérez, A., Fernández, M., Vicente, A. d., August 1996. Towards a method to conceptualize domain ontologies. In: At 12th European Conference on Artificial Intelligence. Budapest, Rumania, pp. 41-51. URL: http://oa.upm.es/7228/Indriago, C., Cardin, O., Rakoto, N., Castagna, P., Chac'on, E., 2016. H2CM: A holonic architecture for flexible hybrid control systems. Computers in industry 77, 15-28, https://doi.org/10.1016/j.compind.2015.12.005ISO, 1997. ISO 10303 - Industrial Automation Systems and Integration - Product data representation and exchange - Part 1: Overview and fundamental principles. ISO - International Standards Organization, Geneva, Switzerland. URL: https://www.iso.org/standard/20579.htmlISO, 1998. ISO 15531 - Industrial Automation Systems and Integration - Industrial Manufacturing Management Data - Part 1: General overview. ISO - International Standards Organization, Geneva, Switzerland. URL: http://hsevi.ir/RI Standard/View/2880ISO, 1999. ISO 13584 - Industrial Automation Systems and Integration - Parts Library - Part 1: Overview and Fundamental Principles. ISO - International Standards Organization, Geneva, Switzerland. URL: https://www.iso.org/standard/25103.htmlJules, G., Saadat, M., Saeidlou, S., 2015. Holonic ontology and interaction protocol for manufacturing network organization. IEEE Transactions on systems, man, and cybernetics: systems 45 (5), 819-830, https://doi.org/10.1109/TSMC.2014.2387099Koestler, A., 1990. The ghost in the machine. Arkana. Koppensteiner, G., Grabler, R., Miller, D., Merdan, M., 2015. Virtual enterprises based on multiagent systems. In: Leitao, P., Karnouskos, S. (Eds.), Industrial agents: Emerging application of software agents in industry. Elsevier Inc., MA, USA, Ch. 7, pp. 121-136. https://doi.org/10.1016/B978-0-12-800341-1.00007-3Leitao, P., Restivo, F., 2006. ADACOR: a holonic architecture for agile and adaptive manufacturing control. Computers in industry 57 (2), 121-130, https://doi.org/10.1016/j.compind.2005.05.005Leitao, P., Restivo, F., 2008. Implementation of a holonic control system in a flexible manufacturing system. IEEE systems, man, and cybernetics society 38 (5), 699-709, https://doi.org/10.1109/TSMCC.2008.923881Lemaignan, S., Siadat, A., Dantan, J. Y., Semenenko, A., June 2006. MASON: A proposal for an ontology of manufacturing domain. In: At IEEEWorkshop on Distributed Intelligent Systems: Collective Intelligence and Its Applications. pp. 195-200, https://doi.org/10.1109/DIS.2006.48López-Ortega, O., Ramírez-Hernández, M., 2007. A formal framework to integrate express data models in an extended enterprise context. Intelligent manufacturing 18, 371-381, https://doi.org/10.1007/s10845-007-0035-7Luther, M., 2008. Ontologies. In: Berndt, H. (Ed.), Towards 4G Technologies. Services with Initiative. John Wiley & Sons, Ltd., Chippenham, England, Ch. 7, pp. 141-164, https://doi.org/10.1002/9780470010334Noy, N. F., McGuinness, D., March 2001. Ontology development 101: A guide to creating your first ontology. [online] Knowledge Systems Laboratory, Stanford University, Stanford, CA, EE. UU. URL: http://www.ksl.stanford.edu/people/dlm/papers/ontology-tutorial-noy-mcguinness-abstract.htmlOunnar, F., Pujo, P., 2012. Pull control for job shop: holonic manufacturing system approach using multicriteria decision-making. Intelligent manufacturing 23 (1), 141-153, https://doi.org/10.1007/s10845-009-0288-4Raileanu, S., Borangiu, T., Radulescu, S., 2014. Towards an ontology for distributed manufacturing control. In: Borangiu, T., Trentesaux, D., Thomas, A. (Eds.), Service Orientation in Holonic and Multi-Agent Manufacturing and Robotics. Vol. 544 of Studies in Computational Intelligence. Springer International Publishing, Ch. Part II, pp. 97-109, https://doi.org/10.1007/978-3-319-04735-5Shen, W., Norrie, D. H., Barthès, A., 2001. Multi-agent systems for concurrent intelligent design and manufacturing. Taylor & Francis Group, NY, USA, Ch. 11, pp. 215-227. https://doi.org/10.4324/9780203305607Tarun, K. J., Bipradas, B., Soumen, P., Bijan, S., Jyotirmoy, S., 2013. Dynamic schedule execution in an agent based holonic manufacturing system. Manufacturing systems 32 (4), 801-816, https://doi.org/10.1016/j.jmsy.2013.07.004Unland, R., 2015. Industrial agents. In: Leitao, P., Karnouskos, S. (Eds.), Industrial agents: Emerging application of software agents in industry. Elsevier Inc., Amsterdam, Netherlands, Ch. 2, pp. 23-44. https://doi.org/10.1016/B978-0-12-800341-1.00002-4Uschold, M., Gruninger, M., 1996. Ontologies: principles, methods ans applications. Knowledge Engineering Review 11 (2), 93-136, https://doi.org/10.1017/S0269888900007797Uschold, M., King, M., Moralee, S., Zorgios, Y., 1998. The enterprise ontology. The knowledge engineering review 13 (1), 31-89. https://doi.org/10.1017/S0269888998001088Wang, F., Xu, D., Tan, M., Wan, Z., 2005. A holonic architecture for reconfigurable manufacturing systems. IEEE International conference on industrial technology, 905-909. https://doi.org/10.1109/ICIT.2005.160076

Fault diagnosis in industrial process by using LSTM and an elastic net

[EN] Fault diagnosis is important for industrial processes because it permits to determine the necessity of emergency stops in a process and/or to propose a maintenance plan. Two strategies for fault diagnosis are compared in this work. On the one hand, the data are preprocessed using the independent components analysis for dimension reduction, then the wavelet transform is used in order to highlight the faulty signals, with this information an artificial neural network was fed. On the other hand, the second strategy, the main contribution of this work, is the implementation of a long short term memory. This memory is fed with the most representative variables selected by an elastic net to use both, the L1 and L2 norms. These strategies are applied in the Tennessee Eastman process, a benchmark widely used for fault diagnosis. The fault isolation had better results than those reported in the literature.[ES] El diagnóstico de fallas es importante en los procesos industriales, ya que permite determinar si es necesario detener el proceso en operación y/o proponer un plan de mantenimiento. En el presente trabajo se comparan dos estrategias para diagnosticar fallas. La primera realiza un preprocesamiento de datos usando el análisis de componentes independientes para reducir la dimensión de los datos, posteriormente, se emplea la transformada wavelet para resaltar las señales de falla, con esta información se alimenta una red neuronal artificial. Por su parte, la segunda estrategia, principal contribución de este trabajo, usa una memoria de corto y largo plazo. Esta memoria es alimentada por las variables más significativas seleccionadas mediante una red elástica para usar tanto la norma $L_1$ como la $L_2$. Como ejemplo de aplicación se utilizó el proceso químico Tennessee Eastman, un proceso ampliamente usado en el diagnóstico de fallas. El aislamiento de fallas mostró mejores resultados con respecto a los reportados en la literatura.Márquez-Vera, MA.; López-Ortega, O.; Ramos-Velasco, LE.; Ortega-Mendoza, RM.; Fernández-Neri, BJ.; Zúñiga-Peña, NS. (2021). Diagnóstico de fallas mediante una LSTM y una red elástica. Revista Iberoamericana de Automática e Informática industrial. 18(2):164-175. https://doi.org/10.4995/riai.2020.13611OJS164175182Adewole, A., Tzoneva, R., Behardien, S., 2016. Distribution network fault section identification and fault location using wavelet entropy and neural networks. Applied Soft Computing 46, 296-306. https://doi.org/10.1016/j.asoc.2016.05.013Alkaya, A., Eker, I., 2011. Variance sensitive adaptive threshold-based PCA method for fault detection with experimental application. ISA Transactions 50, 287-302. https://doi.org/10.1016/j.isatra.2010.12.004Barakat, S., Eteiba, M., Wahba, W., 2014. Fault location in underground cables using anfis nets and discrete wavelet transform. Journal of Electrical Systems and Information Technology 1, 198-211. https://doi.org/10.1016/j.jesit.2014.12.003Bathelt, A., Ricker, N., Jelali, M., 2015. Revision of the Tennessee Eastman process model. IFAC Papers-Online 48 (8), 309-314. https://doi.org/10.1016/j.ifacol.2015.08.199Boldt, F., Rauber, T., Varejao, F., October 2014. Evaluation of the extreme learning machine for automatic fault diagnosis of the Tennessee Eastman chemical process. In: IEEE (Ed.), Annual Conference of the IEEE Industrial Electronics Society. Vol. 40. Dallas, Texas, pp. 2551-2557. https://doi.org/10.1109/IECON.2014.7048865Chen, H., Tino, P., Yao, X., 2014. Cognitive fault diagnosis in Tennessee Eastman process using learning in the model space. Computers and Chemical Engineering 67, 33-42. https://doi.org/10.1016/j.compchemeng.2014.03.015Rodrigues, J., Filho, P., PeixotoJr., E., Kumar, A., deAlbuquerque, V., 2019. Classification of EEG signals to detect alcoholism using machine learning techniques. Pattern Recognition Letters 125, 140-149. https://doi.org/10.1016/j.patrec.2019.04.019Dixit, A., Majumdar, S., 2013. Comparative analysis of coiflet and daubechies wavelets using global threshold for image denoising. Intenational Journal of Advances in Engineering & Technology 6 (5), 2247-2252.Downs, J., Vogel, E., 1993. A plant-wide industrial process control problem. Computers and Chemical Engineering 17 (3), 245-255. https://doi.org/10.1016/0098-1354(93)80018-IFischer, T., Krauss, C., 2018. Deep learning with long short-term memory networks for financial market predictions. European Journal of Operational Research 270, 654-669. https://doi.org/10.1016/j.ejor.2017.11.054Gao, X., Hou, J., 2016. An improved SVM integrated GS-PCA fault diagnosis approach of Tennessee Eastman process. Neurocomputing 174, 906-911. https://doi.org/10.1016/j.neucom.2015.10.018Geng, Z., Li, Z., Han, Y., 2018. A new deep belief network based on RBM with glial chains. Information Sciences 463, 294-306. https://doi.org/10.1016/j.ins.2018.06.043Goodfellow, I., Bengio, Y., Courville, A., 2016. Deep Learning. MIT Press, United States of America, http://www.deeplearningbook.ogr.Han, L., Li, C., Guo, S., Su, X., 2015. Feature extraction method of bearing AE signal based on improved Fast-ICA and wavelet packet energy. Mechanical Systems and Signal Processing 62-63, 91-99. https://doi.org/10.1016/j.ymssp.2015.03.009Hastie, T., Tibshirani, R., Friedman, J., 2009. The elements of statistical learning: data mining, inference and prediction. Springer, New York. https://doi.org/10.1007/978-0-387-84858-7Hoang, D., Kang, H., 2019. A survey on deep learning based bearing fault diagnosis. Neurocomputing 335, 327-335. ttps://doi.org/10.1016/j.neucom.2018.06.078Hochreiter, S., Schmidhuber, J., 1997. Long short term memory. Neural Computation 9 (8), 1735-1780. ttps://doi.org/10.1162/neco.1997.9.8.1735Hyvärinen, A., Oja, E., 2000. Independent component analysis: Algorithms and applications. Neural Networks 13, 411-430. ttps://doi.org/10.1016/S0893-6080(00)00026-5Jing, C., Gao, X., Zhu, X., Lang, S., July 2014. Fault classificaction on Tennessee Eastman process: PCA and SVM. In: IEEE (Ed.), Intenational Conference on Mecatronics and Control. Jinzhou, China, pp. 2194-2197. https://doi.org/10.1109/ICMC.2014.7231958Jung, C., Kim, K., Lee, J., Klockl, B., 2007. Wavelet and neuro-fuzzy based fault location for combined transmission systems. Energy Systems 29, 445-454. https://doi.org/10.1016/j.ijepes.2006.11.003Kandula, V. K., 2011. Fault detection in process control plants using principal component analysis. Master's thesis, Louisiana State University, Department of Electrical Engineering.Karpenko, M., Sepehri, N., Octubre 2001. A neural network based fault detection and identification scheme for pneumatic process control valves. In: IEEE (Ed.), International Conference on Systems, Man and Cybernetics. Tucson, USA, pp. 93-98. https://doi.org/10.1109/ICSMC.2001.969794Khakipour, M., Safavi, A., Setoodeh, P., 2017. Bearing fault diagnosis with morphological gradient wavelet. Journal of the Franklin Institute 354, 2465-2476. https://doi.org/10.1016/j.jfranklin.2016.11.013Kuang, T., Yang, Z., Yao, Y., 2015. Multivariate fault isolation via variable selection in discriminant analysis. Journal of Process Control 35, 30-40. https://doi.org/10.1016/j.isatra.2017.06.014Kumar, R., Bansal, H., 2019. Hardware in the loop implementation of wavelet based strategy in shuntactive powerfilter to mitigate power quality issues. Electric Power Systems Research 169, 92-104. https://doi.org/10.1016/j.epsr.2019.01.001Lau, C., Ghosh, K., Hussain, M., Hassan, C. C., 2013. Fault disgnosis of Tennessee Eastman process with multi-scale PCA and ANFIS. Chemom. Intell. Lab. Syst. 120, 1-14. https://doi.org/10.1016/j.chemolab.2012.10.005Lee, J., Yoo, C., Lee, I., 2004. Statistical process monitoring with independent component analysis. Journal of Process Control 14 (5), 467-485. https://doi.org/10.1016/j.jprocont.2003.09.004Lei, J., Liu, C., Jiang, D., 2019. Fault diagnosis of wind turbine based on long short-term memory networks. Renewable Energy 133, 422-432. https://doi.org/10.1016/j.renene.2018.10.031Li, W., Monti, A., Ponci, F., 2014. Fault detection and classification in medium voltage DC shipboard power systems with wavelets and artificial neural networks. IEEE Transactions on Instrumentation and Measurement 63 (11), 2651-2665. https://doi.org/10.1109/TIM.2014.2313035Liang, P., Deng, C.,Wu, J., Yang, Z., Zhu, J., Zhang, Z., 2019. Compound fault diagnosis of gearboxes via multi-label convolutional neural network and wavelet transform. Computers in Industry 113, 103132. https://doi.org/10.1016/j.compind.2019.103132Lin, J., Zhang, A., 2005. Fault feature separation using wavelet-ICA filter. NDT&E International 38, 421-427. https://doi.org/10.1016/j.ndteint.2004.11.005Linker, R., Gutman, P., Seginer, I., 2002. Observer-based robust failure detection and isolation in greenhouses. Control Engineering Practice 10 (5), 519- 531. https://doi.org/10.1016/S0967-0661(02)00002-3Lou, W., Loparo, K., 2004. Bearing fault diagnosis based on wavelet transform and fuzzy inference. Mechanical Systems and Signal Processing 18, 1077-1095. https://doi.org/10.1016/S0888-3270(03)00077-3Lv, F.,Wen, C., Bao, Z., Liu, M., 2016. Fault diagnosis based on deep learning. In: AACC (Ed.), American Control Conference. Boston, USA, pp. 6851-6856. https://doi.org/10.1109/ACC.2016.7526751Lv, F., Wen, C., Liu, M., Bao, Z., 2017. Weighted time series fault diagnosis based on a staked sparce autoencoder. Journal of Chemometrics 31, 16 pages. https://doi.org/10.1002/cem.2912Lv, F., Fan, X., Wen, C., Bao, Z., 2018. Stacked sparse auto encoder network based multimode process monitoring. In: IEEE (Ed.), International Conference on Control Automation & Information Science. Hangzhou, China, pp. 227-232. https://doi.org/10.1109/ICCAIS.2018.8570618Maglaveras, N., Stamkopoulos, T., Diamantaras, K., Pappas, C., Strintzis, M., 1998. ECG pattern recognition and classification using non-linear transfor mations and neural networks: A review. International Journal of Medical Informatics 52, 191-208. https://doi.org/10.1016/S1386-5056(98)00138-5Methnani, S., Lafont, F., Gautier, J., Damak, T., Toumi, A., 2013. Actuator and sensor fault detection, isolation and identification in nonlinear dynamical systems, with applications to a waste water treatment plant. Journal of Computer Engineering and Informatics 1 (4), 112-125. https://doi.org/10.1080/21642583.2014.888525Muñoz-Cobo, J., Mendizábal, R., Miquel, A., Berna, C., Escrivá, A., 2017. Use of the principles of maximum entropy and maximum relative entropy for the determination of uncertain parameter distributions in engineering applications. Entropy 19, 486, 37 pages. https://doi.org/10.3390/e19090486Nguyen, B., Quyen, A., Nguyen, P., Ton, T., July 2017. Wavelet-based neural network for recognition of faults at nhabe power substation of the vietnam power system. In: IEEE (Ed.), International Conference on System Science and Engineering. Ho Chi Minh City, Vietnam, pp. 165-168. https://doi.org/10.1109/ICSSE.2017.8030858Ojeda-González, A., Mendes-Jr., O., Oliveira-Domingues, M., Menconi, V., 2014. Daubechies wavelet coeffcients: a tool to study interplanetary magnetic field fluctuations. Geof'ısica Internacional 53 (2), 101-115. https://doi.org/10.1016/S0016-7169(14)71494-1Oliveira, J., Pontes, K., Santori, I., Embirucu, M., 2017. Fault detection and diagnosis in dynamic systems using weightless neural networks. Expert Systems With Applications 84, 200-219. https://doi.org/10.1016/j.eswa.2017.05.020Patan, K., 2008. Artificial neural networks for the modelling and fault diagnosis of technical process. Lecture Notes in Control and Information Sciences. Springer, India.Rafiee, J., Rafiee, M., Tse, P., 2010. Application of mother wavelet functions for automatic gear and bearing fault diagnosis. Expert Systems with Applications 37, 4568-4579. https://doi.org/10.1016/j.eswa.2009.12.051Ramos-Velasco, L., Ramos-Fernández, J., Islar-Gómez, O., Espejel-Rivera, M., García-Lamont, J., Márquez-Vera, M., 2013. Identificación y control wavenet de un motor de ca. Revista Iberoamericana de Automática e Informática Industrial 10, 269-278. https://doi.org/10.1016/j.riai.2013.05.002Rato, T., Reis, M., 2013. Defining the structure of DPCA models and its impact on process monitoring and prediction ctivities. Chemometrics and Intelligent Laboratory Systems 125, 74-86. https://doi.org/10.1016/j.chemolab.2013.03.009Rockinger, M., Jondeau, E., 2002. Entropy densities with an application to autoregressive conditional skewness and kurtosis. Journal of Econometrics 106, 119-142. https://doi.org/10.1016/S0304-4076(01)00092-6Salahschoor, K., Kiasi, F., July 2008. On-line process monitoring based on wavelet-ICA methodology. In: IFAC (Ed.), Proceedings of the 17th World Congress. Seul- Korea, pp. 6-11. https://doi.org/10.3182/20080706-5-KR-1001.01253Salahshoor, K., Khoshro, M., Kordestani, M., 2011. Fault detection and diagnosis of an industrial steam turbine using a distributed configuration of adaptive neuro-fuzzy inference systems. Simulation Modelling Practice and Theory 19, 1280-1293. https://doi.org/10.1016/j.simpat.2011.01.005Sharif, I., Khare, S., 2014. Comparative analysis of Haar and Daubechies wavelet for hyper spectral image classification. In: Commission, I. T. (Ed.), VIII Symposium of The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Science. Hyderabad-India, pp. 937-941. https://doi.org/10.5194/isprsarchives-XL-8-937-2014Smirnov, E., Timoshenko, D., Adrianov, S., 2014. Comparison of regularization methods for imagenet classification with deep convolutional neural networks. AASRI Procedia 6, 89-94. https://doi.org/10.1016/j.aasri.2014.05.013Sobhani-Tehrani, E., Khorasani, K., 2009. Fault diagnosis of nonlinear systems using a hybrid approach. Fault detetion and diagnosis. Springer, Berlin, Ch. 2, pp. 22-49. https://doi.org/10.1007/978-0-387-92907-1_2Tayarani-Bathaie, S., Vanini, Z., Khorasani, K., 2014. Dynamic neural networkbased fault diagnosis of gas turbine engines. Neurocomputing 125, 153-165. https://doi.org/10.1016/j.neucom.2012.06.050Zvokelj, M., Zupan, S., Prebil, I., 2016. EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis. Journal of Sound and Vibration 26, 394-423. https://doi.org/10.1016/j.jsv.2016.01.046Wang, X., Qin, Y., Wang, Y., Xiang, S., Chen, H., 2019. ReLTanh: An activation function with vanishing gradient resistance for SAE-based DNNs and its application to rotating machinery fault diagnosis. Neurocomputing 363, 88-98. https://doi.org/10.1016/j.neucom.2019.07.017Wu, F., Tong, F., Yang, Z., 2016. EMGdi signal enhancement based on ICA decomposition and wavelet transform. Applied Soft Computing 43, 561-571. https://doi.org/10.1016/j.asoc.2016.03.002Wu, J., Hsu, C., Wu, G., 2009. Fault gear identification and classification using discrete wavelet transform and adaptive neuro-fuzzy inference. Expert Systems with Applications 36, 6244-6255. https://doi.org/10.1016/j.eswa.2008.07.023Wu, Q., Law, R., Wu, S., 2011. Fault diagnosis of car assembly line based on fuzzy wavelet kernel support vector classifier machine and modified genetic algorithm. Expert Systems with Applications 38, 9096-9104. https://doi.org/10.1016/j.eswa.2010.12.109Wu, H., Zhao., Jinsong, 2018. Deep convolutional neural network model based chemical process fault diagnosis. Computers and Chemical Engineering 115, 185-197. https://doi.org/10.1016/j.compchemeng.2018.04.009Xiao, C., Chen, N., Hu, C., Wang, K., Gong, J., Chen, Z., 2019. Short and midterm sea surface temperature prediction using time-series satellite data and LSTM-AdaBoost combination approach. Remote Sensing of Environment 233, 111358. https://doi.org/10.1016/j.rse.2019.111358Xie, D., Bai, L., December 2015. A hierarchical deep neural network for fault diagnosis on Tennessee-Eastman process. In: IEEE (Ed.), International Conference on Machine Learning and Applications. Vol. 14. Miami, USA, pp. 745-748. https://doi.org/10.1109/ICMLA.2015.208Yan, R., Gao, R., Chen, X., 2014. Wavelets for fault diagnosis of rotary machines: A review with applications. Signal Processing 351, 4555-4569. https://doi.org/10.1016/j.sigpro.2013.04.015Yan, Z., Yao, Y., 2015. Variable selection method for fault isolation using least absolute shrinkage and selection operator (LASSO). Chemometrics and Intelligent Laboratory Systems 146, 136-146. https://doi.org/10.1016/j.chemolab.2015.05.019Yao, G., Lei, T., Zhong, J., 2019. A review of convolutional-neural-networkbased action recognition. Pattern Recognition Letters 118, 14-22. https://doi.org/10.1016/j.patrec.2018.05.018Yin, S., Ding, S., Haghani, A., Hao, H., Zhang, P., 2012. A comparison study of basic data-driven fault diagnosis and process monitoring methods on the benchmark Tennessee Eastman process. Journal of Process Control 22, 1567-1581. https://doi.org/10.1016/j.jprocont.2012.06.009Zhang, Q., Yang, L., Chen, Z., Li, P., 2018. A survey on deep learning for big data. Information Fusion 42, 146-157. https://doi.org/10.1016/j.inffus.2017.10.006Zhang, X., Polycarpou, M., Parisini, T., 2002. A robust detection and isolation scheme for abrupt and incipient faults in nonlinear systems. IEEE Transactions on Automatic Control 47 (4), 576-593. https://doi.org/10.1109/9.995036Zhang, Y., Zhang, L., Zhang, H., 2012. Fault detection for industrial processes. Mathematical Problems in Engineering 2012, 18 pages. https://doi.org/10.1155/2012/757828Zhang, Z., Zhao, J., 2017. A deep belief network based fault diagnosis model for complex chemical process. Computers and Chemical Engineering 107, 395-407. https://doi.org/10.1016/j.compchemeng.2017.02.041Zhao, H., 2018. Neural component analysis for fault detection. Chemometrics and Intelligent Laboratory Systems 176, 11-21. https://doi.org/10.1016/j.chemolab.2018.02.001Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., Gao, R., 2019. Deep learning and its applications to machine health monitoring. Mechanical Systems and Signal Processing 115, 213-237. https://doi.org/10.1016/j.ymssp.2018.05.050Zheng, J., Huang, W., Wang, Z., Liang, J., 2019. Mutual information-based sparse multiblock dissimilarity method for incipient fault detection and diagnosis in plant-wide process. Journal of Process Control 83, 63-76. https://doi.org/10.1016/j.jprocont.2019.09.00

Ayotzinapa y la crisis del estado neoliberal mexicano

¿Qué pasó en Ayotzinapa? Es la pregunta que surgió el 26 de septiembre de 2014, que no encuentra una respuesta satisfactoria pese a la intervención de actores de distintas instancias, niveles y nacionalidades, y al esbozo de múltiples hipótesis sobre los enfrentamientos registrados en Iguala, Guerrero, que derivaron en la muerte de varias personas y la desaparición de 43 estudiantes de la Normal Rural “Isidro Burgos”, en una tragedia que evidenció la crisis que atraviesa el estado mexicano y que afecta a todo el país. A partir de lo acontecido en Ayotzinapa y con base en la teoría general de los campos de Pierre Bourdieu y su propuesta de análisis teórico metodológico sobre el estado, en esta obra se realiza un análisis de la práctica sistemática y generalizada de las desapariciones forzadas en México, con el fin de ofrecer otra manera de comprender el entretejido político–económico–social que hace posible este grave fenómeno, que desgarra tanto a familias como a la comunidad. La herida abierta por Ayotzinapa sangra y el objetivo último de este libro es contribuir a evitar que se cierre en tanto no se responda la interrogante de qué pasó ahí y que crímenes de lesa humanidad como este sigan aconteciendo en México.ITESO, A.C

Bruxism and psychotropic medications

This is an accepted manuscript of an article published by Wiley in Progress in Neurology and Psychiatry on 13/02/2020, available online: https://wchh.onlinelibrary.wiley.com/doi/10.1002/pnp.560 The accepted version of the publication may differ from the final published version.Mental Health Disorders including schizophrenia, bipolar and schizoaffective disorders are often treated using psychotropic medications with evidence that some of these medications such as antipsychotics could be associated with significant oral side-effects. In this comprehensive review, we examine the psychotropic medications mechanisms of action and their oral side-effects, with specific focus on psychotropic medications and bruxism as a major oral health complication with a negative impact on the quality of life of mental health sufferers, relevant to psychiatrists, dentists and general practitioners. Bruxism could be caused by the antipsychotics extrapyramidal side-effects through dopaminergic receptors. Bruxism as a side-effect of psychotropic medications could result in significant consequences to oral health such as tooth structure destruction and irreversible harm to the temporomandibular joint. The review findings could assist in understanding the aetiology of bruxism, establish appropriate management plan, while supporting psychiatrists and dentists to detect temporomandibular dysfunctions (TMD) such as bruxism

Specification of Drosophila Corpora Cardiaca Neuroendocrine Cells from Mesoderm Is Regulated by Notch Signaling

Drosophila neuroendocrine cells comprising the corpora cardiaca (CC) are essential for systemic glucose regulation and represent functional orthologues of vertebrate pancreatic α-cells. Although Drosophila CC cells have been regarded as developmental orthologues of pituitary gland, the genetic regulation of CC development is poorly understood. From a genetic screen, we identified multiple novel regulators of CC development, including Notch signaling factors. Our studies demonstrate that the disruption of Notch signaling can lead to the expansion of CC cells. Live imaging demonstrates localized emergence of extra precursor cells as the basis of CC expansion in Notch mutants. Contrary to a recent report, we unexpectedly found that CC cells originate from head mesoderm. We show that Tinman expression in head mesoderm is regulated by Notch signaling and that the combination of Daughterless and Tinman is sufficient for ectopic CC specification in mesoderm. Understanding the cellular, genetic, signaling, and transcriptional basis of CC cell specification and expansion should accelerate discovery of molecular mechanisms regulating ontogeny of organs that control metabolism