The impact of meridian balance method electro-acupuncture treatment on chronic pelvic pain in women: a three-armed randomised controlled feasibility study using a mixed methods approach

Introduction:\ud Chronic pelvic pain (CPP) is estimated to affect 6%–27% of women worldwide. In the United Kingdom, over 1 million women suffer from CPP and it has been highlighted as a key area of unmet need. Standard treatments are associated with unacceptable side effects. The meridian balance method electro-acupuncture (BMEA), and traditional Chinese medicine health consultation (TCM HC) (BMEA + TCM HC = BMEA treatment) may be an effective adjunct to standard treatment.\ud \ud Aim:\ud The aim of our study was to evaluate the feasibility of a future trial, to determine the effectiveness of the BMEA treatment for CPP in women. The primary objectives were to determine recruitment and retention rates. The secondary objectives were to assess the effectiveness of the BMEA treatment and acceptability of the study’s methodology.\ud \ud Methods:\ud Women with CPP were randomised into BMEA treatment (group 1), TCM HC alone (group 2) (each intervention administered twice weekly for 4 weeks) or National Health Service standard care (NHS SC, group 3). Primary outcomes were assessed by the proportion of eligible participants randomised, and the proportion of randomised participants who returned follow-up questionnaires. Interventions were assessed by validated pain/physical/emotional functioning questionnaires at baseline (0), 4, 8 and 12 weeks. Focus groups and semi-structured telephone interviews were embedded in the study.\ud \ud Results:\ud A total of 30 women (51% of those referred) were randomised over 8 months. Retention rates were 80% (95% confidence interval (CI): 74–96), 53% (95% CI: 36–70) and 87% (95% CI: 63–90), in groups 1, 2, and 3, respectively. Qualitative data suggested a favourable trial experience in groups 1 and 3.\ud \ud Discussion:\ud Group 2 retention rate was problematic and has implications for our next trial.\ud \ud Conclusion:\ud Our study suggests that a future trial to determine the effectiveness of BMEA treatment for women with CPP is feasible but with modifications to the study design

A survey of healthcare providers’ knowledge and attitudes regarding pain relief in labor for women in Ethiopia

BACKGROUND: To explore healthcare providers' knowledge and attitudes to the need for pain relief for women in labor. METHODS: A structured questionnaire (n = 200) distributed to healthcare providers working in the obstetric departments, including theatres, of three public hospitals in different settings (rural, peri-urban and urban) in Ethiopia. Descriptive analysis was performed using Excel 2013 and SPSS version 22 for associations. RESULTS: The response rate was 81.5% with 164 questionnaires completed. The majority, 79% of respondents, understood that women can feel moderate to severe pain in labor and 77% were of the opinion that labor pain should be relieved. However, common practices included only supportive measures such as breathing and relaxation exercises, back massage and support from family. The general attitude of healthcare providers is that labor is a natural process, women should be able to cope and that pain relief is not a priority for women in labor. More than half, 52% of healthcare providers had safety concerns with using pharmacological methods to relieve pain in labor. CONCLUSION: The majority of healthcare providers understand that women suffer significant pain during labor. However, providing effective pain relief is currently not provided as part of routine intra-partum care in Ethiopia

Reach and grasp by people with tetraplegia using a neurally controlled robotic arm

Paralysis following spinal cord injury (SCI), brainstem stroke, amyotrophic lateral sclerosis (ALS) and other disorders can disconnect the brain from the body, eliminating the ability to carry out volitional movements. A neural interface system (NIS)1–5 could restore mobility and independence for people with paralysis by translating neuronal activity directly into control signals for assistive devices. We have previously shown that people with longstanding tetraplegia can use an NIS to move and click a computer cursor and to control physical devices6–8. Able-bodied monkeys have used an NIS to control a robotic arm9, but it is unknown whether people with profound upper extremity paralysis or limb loss could use cortical neuronal ensemble signals to direct useful arm actions. Here, we demonstrate the ability of two people with long-standing tetraplegia to use NIS-based control of a robotic arm to perform three-dimensional reach and grasp movements. Participants controlled the arm over a broad space without explicit training, using signals decoded from a small, local population of motor cortex (MI) neurons recorded from a 96-channel microelectrode array. One of the study participants, implanted with the sensor five years earlier, also used a robotic arm to drink coffee from a bottle. While robotic reach and grasp actions were not as fast or accurate as those of an able-bodied person, our results demonstrate the feasibility for people with tetraplegia, years after CNS injury, to recreate useful multidimensional control of complex devices directly from a small sample of neural signals

Search for resonant WZ production in the fully leptonic final state in proton–proton collisions at √s=13 TeV with the ATLAS detector

A search for a WZ resonance, in the fully leptonic final state (electrons or muons), is performed using 139 fb - 1 of data collected at a centre-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. The results are interpreted in terms of a singly charged Higgs boson of the Georgi–Machacek model, produced by WZ fusion, and of a Heavy Vector Triplet, with the resonance produced by WZ fusion or the Drell–Yan process. No significant excess over the Standard Model prediction is observed and limits are set on the production cross-section times branching ratio as a function of the resonance mass for these processes

Measurement of exclusive pion pair production in proton–proton collisions at √s=7 TeV with the ATLAS detector

The exclusive production of pion pairs in the process pp→ ppπ+π- has been measured at s=7TeV with the ATLAS detector at the LHC, using 80μb-1 of low-luminosity data. The pion pairs were detected in the ATLAS central detector while outgoing protons were measured in the forward ATLAS ALFA detector system. This represents the first use of proton tagging to measure an exclusive hadronic final state at the LHC. A cross-section measurement is performed in two kinematic regions defined by the proton momenta, the pion rapidities and transverse momenta, and the pion–pion invariant mass. Cross-section values of 4.8±1.0(stat)-0.2+0.3(syst)μb and 9±6(stat)-2+2(syst)μb are obtained in the two regions; they are compared with theoretical models and provide a demonstration of the feasibility of measurements of this type

A detailed map of Higgs boson interactions by the ATLAS experiment ten years after the discovery

The standard model of particle physics1–4 describes the known fundamental particles and forces that make up our Universe, with the exception of gravity. One of the central features of the standard model is a field that permeates all of space and interacts with fundamental particles5–9. The quantum excitation of this field, known as the Higgs field, manifests itself as the Higgs boson, the only fundamental particle with no spin. In 2012, a particle with properties consistent with the Higgs boson of the standard model was observed by the ATLAS and CMS experiments at the Large Hadron Collider at CERN10,11. Since then, more than 30 times as many Higgs bosons have been recorded by the ATLAS experiment, enabling much more precise measurements and new tests of the theory. Here, on the basis of this larger dataset, we combine an unprecedented number of production and decay processes of the Higgs boson to scrutinize its interactions with elementary particles. Interactions with gluons, photons, and W and Z bosons—the carriers of the strong, electromagnetic and weak forces—are studied in detail. Interactions with three third-generation matter particles (bottom (b) and top (t) quarks, and tau leptons (τ)) are well measured and indications of interactions with a second-generation particle (muons, μ) are emerging. These tests reveal that the Higgs boson discovered ten years ago is remarkably consistent with the predictions of the theory and provide stringent constraints on many models of new phenomena beyond the standard model

Measurement of the nuclear modification factor of b-jets in 5.02 TeV Pb+Pb collisions with the ATLAS detector

This paper presents a measurement of b-jet production in Pb+Pb and pp collisions at √sNN = 5.02 TeV with the ATLAS detector at the LHC. The measurement uses 260 pb−1 of pp collisions collected in 2017 and 1.4 nb−1 of Pb+Pb collisions collected in 2018. In both collision systems, jets are reconstructed via the anti-kt algorithm. The b-jets are identified from a sample of jets containing muons from the semileptonic decay of b-quarks using template fits of the muon momentum relative to the jet axis. In pp collisions, b-jets are reconstructed for radius parameters R = 0.2 and R = 0.4, and only R = 0.2 jets are used in Pb+Pb collisions. For comparison, inclusive R = 0.2 jets are also measured using 1.7 nb−1 of Pb+Pb collisions collected in 2018 and the same pp collision data as the b-jet measurement. The nuclear modification factor, RAA, is calculated for both b-jets and inclusive jets with R = 0.2 over the transverse momentum range of 80–290 GeV. The nuclear modification factor for b-jets decreases from peripheral to central collisions. The ratio of the b-jet RAA to inclusive jet RAA is also presented and suggests that the RAA for b-jets is larger than that for inclusive jets in central Pb+Pb collisions. The measurements are compared with theoretical calculations and suggest a role for mass and colour-charge effects in partonic energy loss in heavy-ion collisions

Long-baseline neutrino oscillation physics potential of the DUNE experiment

The sensitivity of the Deep Underground Neutrino Experiment (DUNE) to neutrino oscillation is determined, based on a full simulation, reconstruction, and event selection of the far detector and a full simulation and parameterized analysis of the near detector. Detailed uncertainties due to the flux prediction, neutrino interaction model, and detector effects are included. DUNE will resolve the neutrino mass ordering to a precision of 5σ, for all ΑCP values, after 2 years of running with the nominal detector design and beam configuration. It has the potential to observe charge-parity violation in the neutrino sector to a precision of 3σ (5σ) after an exposure of 5 (10) years, for 50% of all ΑCP values. It will also make precise measurements of other parameters governing long-baseline neutrino oscillation, and after an exposure of 15 years will achieve a similar sensitivity to sin22θ13 to current reactor experiments

Searches for lepton-flavour-violating decays of the Higgs boson into eτ and μτ in \sqrt{s} = 13 TeV pp collisions with the ATLAS detector

Abstract This paper presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ, performed using data collected with the ATLAS detector at the LHC. The searches are based on a data sample of proton-proton collisions at a centre-of-mass energy s $$\sqrt{s}$$ = 13 TeV, corresponding to an integrated luminosity of 138 fb−1. Leptonic (τ → ℓνℓντ) and hadronic (τ → hadrons ντ) decays of the τ-lepton are considered. Two background estimation techniques are employed: the MC-template method, based on data-corrected simulation samples, and the Symmetry method, based on exploiting the symmetry between electrons and muons in the Standard Model backgrounds. No significant excess of events is observed and the results are interpreted as upper limits on lepton-flavour-violating branching ratios of the Higgs boson. The observed (expected) upper limits set on the branching ratios at 95% confidence level, B $$\mathcal{B}$$ (H → eτ) < 0.20% (0.12%) and B $$\mathcal{B}$$ (H → μτ ) < 0.18% (0.09%), are obtained with the MC-template method from a simultaneous measurement of potential H → eτ and H → μτ signals. The best-fit branching ratio difference, B $$\mathcal{B}$$ (H → μτ) → B $$\mathcal{B}$$ (H → eτ), measured with the Symmetry method in the channel where the τ-lepton decays to leptons, is (0.25 ± 0.10)%, compatible with a value of zero within 2.5σ