Laboratory investigation of constitutive property up-scaling in volcanic tuffs

One of the critical issues facing the Yucca Mountain site characterization and performance assessment programs is the manner in which property up-scaling is addressed. Property up-scaling becomes an issue whenever heterogeneous media properties are measured at one scale but applied at another. A research program has been established to challenge current understanding of property up-scaling with the aim of developing and testing improved models that describe up-scaling behavior in a quantitative manner. Up-scaling of constitutive rock properties is investigated through physical experimentation involving the collection of suites of gas-permeability data measured over a range of discrete scales. To date, up-scaling studies have been performed on a series of tuff and sandstone (used as experimental controls) blocks. Samples include a welded, anisotropic tuff (Tiva Canyon Member of the Paintbrush Tuff, upper cliff microstratigraphic unit), and a moderately welded tuff (Tiva Canyon Member of the Paintbrush Tuff, Caprock microstratigraphic unit). A massive fluvial sandstone (Berea Sandstone) was also investigated as a means of evaluating the experimental program and to provide a point of comparison for the tuff data. Because unsaturated flow is of prime interest to the Yucca Mountain Program, scoping studies aimed at investigating the up-scaling of hydraulic properties under various saturated conditions were performed to compliment these studies of intrinsic permeability. These studies focused on matrix sorptivity, a constitutive property quantifying the capillarity of a porous medium. 113 refs

Semiarid watershed response in central New Mexico and its sensitivity to climate variability and change

Hydrologic processes in the semiarid regions of the Southwest United States are considered to be highly susceptible to variations in temperature and precipitation characteristics due to the effects of climate change. Relatively little is known about the potential impacts of climate change on the basin hydrologic response, namely streamflow, evapotranspiration and recharge, in the region. In this study, we present the development and application of a continuous, semi-distributed watershed model for climate change studies in semiarid basins of the Southwest US. Our objective is to capture hydrologic processes in large watersheds, while accounting for the spatial and temporal variations of climate forcing and basin properties in a simple fashion. We apply the model to the Río Salado basin in central New Mexico since it exhibits both a winter and summer precipitation regime and has a historical streamflow record for model testing purposes. Subsequently, we use a sequence of climate change scenarios that capture observed trends for winter and summer precipitation, as well as their interaction with higher temperatures, to perform long-term ensemble simulations of the basin response. Results of the modeling exercise indicate that precipitation uncertainty is amplified in the hydrologic response, in particular for processes that depend on a soil saturation threshold. We obtained substantially different hydrologic sensitivities for winter and summer precipitation ensembles, indicating a greater sensitivity to more intense summer storms as compared to more frequent winter events. In addition, the impact of changes in precipitation characteristics overwhelmed the effects of increased temperature in the study basin. Nevertheless, combined trends in precipitation and temperature yield a more sensitive hydrologic response throughout the year

Using a coupled agent-based modeling approach to analyze the role of risk perception in water management decisions

Managing water resources in a complex adaptive natural–human system is a challenge due to the difficulty of modeling human behavior under uncertain risk perception. The interaction between human-engineered systems and natural processes needs to be modeled explicitly with an approach that can quantify the influence of incomplete/ambiguous information on decision-making processes. In this study, we two-way coupled an agent-based model (ABM) with a river-routing and reservoir management model (RiverWare) to address this challenge. The human decision-making processes is described in the ABM using Bayesian inference (BI) mapping joined with a cost–loss (CL) model (BC-ABM). Incorporating BI mapping into an ABM allows an agent's psychological thinking process to be specified by a cognitive map between decisions and relevant preceding factors that could affect decision-making. A risk perception parameter is used in the BI mapping to represent an agent's belief on the preceding factors. Integration of the CL model addresses an agent's behavior caused by changing socioeconomic conditions. We use the San Juan River basin in New Mexico, USA, to demonstrate the utility of this method. The calibrated BC-ABM–RiverWare model is shown to capture the dynamics of historical irrigated area and streamflow changes. The results suggest that the proposed BC-ABM framework provides an improved representation of human decision-making processes compared to conventional rule-based ABMs that do not take risk perception into account. Future studies will focus on modifying the BI mapping to consider direct agents' interactions, up-front cost of agent's decision, and upscaling the watershed ABM to the regional scale.</p

Dynamic compaction of salt: Initial demonstration and performance testing

Reconsolidated crushed salt is proposed as the sole long-term shaft seal between the Waste Isolation Pilot Plant (WIPP) and the biosphere. The concept for a long-term shaft seal for the WIPP repository is to place crushed salt in the four shafts and to develop an effective seal as the surrounding salt creeps into the shafts, reconsolidating the salt. Permeability of the salt components is calculated to achieve performance objectives at some acceptable time in the future, an expectation which is a key to performance assessment calculations for the WIPP. Such a seal has never been constructed, and until now no performance measurements have been made on an appropriately large scale. A full understanding of construction methods, achievable initial density and permeability and time-wise performance of reconsolidating salt is required. This paper discusses nearly full-scale dynamic compaction of mine-run WIPP salt, preliminary measurements of density and permeability, and their variability within a relatively large volume of compacted materia

Neurocranial osteology and neuroanatomy of a late Cretaceous Titanosaurian Sauropod from Spain (Ampelosaurus sp.)

Titanosaurians were a flourishing group of sauropod dinosaurs during Cretaceous times. Fossils of titanosaurians have been found on all continents and their remains are abundant in a number of Late Cretaceous sites. Nonetheless, the cranial anatomy of titanosaurians is still very poorly known. The Spanish latest Cretaceous locality of "Lo Hueco" yielded a relatively well preserved, titanosaurian braincase, which shares a number of phylogenetically restricted characters with Ampelosaurus atacis from France such as a flat occipital region. However, it appears to differ from A. atacis in some traits such as the greater degree of dorsoventral compression and the presence of proatlas facets. The specimen is, therefore, provisionally identified as Ampelosaurus sp. It was CT scanned, and 3D renderings of the cranial endocast and inner-ear system were generated. Our investigation highlights that, although titanosaurs were derived sauropods with a successful evolutionary history, they present a remarkably modest level of paleoneurological organization. Compared with the condition in the basal titanosauriform Giraffatitan brancai, the labyrinth of Ampelosaurus sp. shows a reduced morphology. The latter feature is possibly related to a restricted range of head-turning movementsThis is a contribution to the research project CGL2009-12143 (Ministerio de Economía y Competitividad, Madrid), of which FK, who is currently supported by the Ramón y Cajal Program, is Principal Investigator. LMW and RCR acknowledge funding support from the United States National Science Foundation (IBN-9601174, IBN-0343744, IOB-0517257, IOS-1050154) and the Ohio University Heritage College of Osteopathic Medicine. The Ohio Supercomputing Center also provided suppor

Highly Unsaturated Fatty Acid Synthesis in Atlantic Salmon: Characterization of ELOVL5- and ELOVL2-like Elongases

Fish species vary in their capacity to biosynthesize the n-3 long-chain polyunsaturated fatty acids (LC-PUFA) eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids that are crucial to the health of higher vertebrates. The synthesis of LC-PUFA involves enzyme-mediated fatty acyl desaturation and elongation. Previously, a cDNA for an elongase, now termed elovl5a, had been cloned from Atlantic salmon. Here we report on the cloning of two new elongase cDNAs: a second elovl5b elongase, corresponding to a 294 aa protein, and an elovl2-like elongase, coding for a 287 aa protein, characterized for the first time in a non-mammalian vertebrate. Heterologous expression in yeast showed that the salmon Elovl5b elongated C18 and C20 PUFA, with low activity towards C22, while Elovl2 elongated C20 and C22 PUFA with lower activity towards C18 PUFA. All three transcripts showed predominant expression in the intestine and liver, followed by the brain. Elongase expression showed differential nutritional regulation. Levels of elovl5b and particularly of elovl2, but not of elovl5a, transcripts were significantly increased in liver of salmon fed vegetable oils (VO) compared to fish fed fish oil (FO). Intestinal expression showed a similar pattern. Phylogenetic comparisons indicate that, in contrast to salmon and zebrafish, Acanthopterygian fish species lack elovl2 which is consistent with their neglible ability to biosynthesise LC-PUFA and to adapt to VO dietary inclusion, compared to predominantly freshwater salmonids. Thus the presence of elovl2 in salmon explains the ability of this species to biosynthesise LC-HUFA and may provide a biotechnological tool to produce enhanced levels of LC-PUFA, particularly DHA, in transgenic organisms

Hip joint articular soft tissues of non-dinosaurian Dinosauromorpha and early Dinosauria: evolutionary and biomechanical implications for Saurischia

Dinosauromorphs evolved a wide diversity of hind limb skeletal morphologies, suggesting highly divergent articular soft tissue anatomies. However, poor preservation of articular soft tissues in fossils has hampered any follow-on functional inferences. We reconstruct the hip joint soft tissue anatomy of non-dinosaurian dinosauromorphs and early dinosaurs using osteological correlates derived from extant sauropsids and infer trends in character transitions along the theropod and sauropodomorph lineagues. Femora and pelves of 107 dinosauromorphs and outgroup taxa were digitized using 3D imaging techniques. Key transitions were estimated using maximum likelihood ancestral state reconstruction. The hips of dinosauromorphs possessed wide a disparity of soft tissue morphologies beyond the types and combinations exhibited by extant archosaurs. Early evolution of the dinosauriform hip joint was characterized by the retention of a prominent femoral hyaline cartilage cone in post-neonatal individuals, with the cartilage cone independently reduced within theropods and sauropodomorphs. The femur of Dinosauriformes possessed a fibrocartilage sleeve on the metaphysis, which surrounded a hyaline core. The acetabulum of Dinosauriformes possessed distinct labrum and antitrochanter structures. In sauropodomorphs, hip congruence was maintained by thick hyaline cartilage on the femoral head, whereas theropods relied on acetabular tissues such as ligaments and articular pads. In particular, the craniolaterally ossified hip capsule of non- Avetheropoda neotheropods permitted mostly parasagittal femoral movements. These data indicate that the dinosauromorph hip underwent mosaic evolution within the saurischian lineage and that sauropodomorphs and theropods underwent both convergence and divergence in articular soft tissues, correlated with transitions in body size, locomotor posture, and joint loading

Data Network Simulator with Classical Ballet

[data]storm, from readysaltedcode CIC, a data driven dance performance. The development of a social network simulator to demonstrate network growth and message propagation. The underpinning theory of piece stems from social network theory (SNT), graph theory, computer mediated communication (CMC) through to social information processing (SIP) and Computational Thinking (CT). The data visualisation is linked to the physical ballet movements of the dancers, they are a manifestation of the data. The data visualisations on screen link to the live dancers performance patterns and modify to create the visuals and movements of data transmission across a network. Network growth. The first of the simulations shows network growth. Each node in the network represents a user who has the following characteristics: • friendliness (how often they're likely to make friends with another user) • chattiness (how often they send out messages) • category (the subject area they're most interested in) At random time intervals things occur: New users are added to the network depending on the above characteristics, users become friends with each other. All the rules stay the same throughout the simulation. At the same time the dance (ballet) movements and wearables (LEDS) were choreographed/coded to accompany the data visualisation using network mapping techniques. The choreography and wearables elements link to the friendliness and chattiness of each of the nodes in the simulated network. This network simulation is further utilised in the Virus section of the performance using the same rules to simulate how a virus can spread through a network. Further work on this simulation will look at two things 1. Message propagation and viral messaging within a social network like Twitter. 2. Pain signals within the body and how they compare to data transfer within a social network

A basal lithostrotian titanosaur (Dinosauria: Sauropoda) with a complete skull: Implications for the evolution and paleobiology of titanosauria

We describe Sarmientosaurus musacchioi gen. et sp. nov., a titanosaurian sauropod dinosaur from the Upper Cretaceous (Cenomanian - Turonian) Lower Member of the Bajo Barreal Formation of southern Chubut Province in central Patagonia, Argentina. The holotypic and only known specimen consists of an articulated, virtually complete skull and part of the cranial and middle cervical series. Sarmientosaurus exhibits the following distinctive features that we interpret as autapomorphies: (1) maximum diameter of orbit nearly 40% rostrocaudal length of cranium; (2) complex maxilla - lacrimal articulation, in which the lacrimal clasps the ascending ramus of the maxilla; (3) medial edge of caudal sector of maxillary ascending ramus bordering bony nasal aperture with low but distinct ridge; (4) ´tongue-like´ ventral process of quadratojugal that overlaps quadrate caudally; (5) separate foramina for all three branches of the trigeminal nerve; (6) absence of median venous canal connecting infundibular region to ventral part of brainstem; (7) subvertical premaxillary, procumbent maxillary, and recumbent dentary teeth; (8) cervical vertebrae with ´strut-like´ centroprezygapophyseal laminae; (9) extremely elongate and slender ossified tendon positioned ventrolateral to cervical vertebrae and ribs. The cranial endocast of Sarmientosaurus preserves some of the most complete information obtained to date regarding the brain and sensory systems of sauropods. Phylogenetic analysis recovers the new taxon as a basal member of Lithostrotia, as the most plesiomorphic titanosaurian to be preserved with a complete skull. Sarmientosaurus provides a wealth of new cranial evidence that reaffirms the close relationship of titanosaurs to Brachiosauridae. Moreover, the presence of the relatively derived lithostrotian Tapuiasaurus in Aptian deposits indicates that the new Patagonian genus represents a ´ghost lineage´ with a comparatively plesiomorphic craniodental form, the evolutionary history of which is missing for at least 13 million years of the Cretaceous. The skull anatomy of Sarmientosaurus suggests that multiple titanosaurian species with dissimilar cranial structures coexisted in the early Late Cretaceous of southern South America. Furthermore, the new taxon possesses a number of distinctive morphologies - such as the ossified cervical tendon, extremely pneumatized cervical vertebrae, and a habitually downward- facing snout - that have rarely, if ever, been documented in other titanosaurs, thus broadening our understanding of the anatomical diversity of this remarkable sauropod clade. The latter two features were convergently acquired by at least one penecontemporaneous diplodocoid, and may represent mutual specializations for consuming low-growing vegetation.Fil: Martínez, Rubén Darío. Universidad Nacional de la Patagonia; ArgentinaFil: Lamanna, Matthew C.. Carnegie Museum Of Natural History; Estados UnidosFil: Novas, Fernando Emilio. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Museo Argentino de Ciencias Naturales "bernardino Rivadavia"; ArgentinaFil: Ridgely, Ryan C.. Ohio University College Of Osteopathic Medicine; Estados UnidosFil: Casal, Gabriel. Universidad Nacional de la Patagonia; ArgentinaFil: Martínez, Javier E.. Hospital Regional de Comodoro Rivadavia; ArgentinaFil: Vita, Javier R.. Resonancia Magnética Borelli; ArgentinaFil: Witmer, Lawrence M.. Ohio University College Of Osteopathic Medicine; Estados Unido

Upconversion-induced heat generation and thermal lensing in Nd:YLF and Nd:YAG

We investigate the influence of interionic upconversion between neighboring ions in the upper laser level of Nd:YLF and Nd:YAG on population dynamics, heat generation, and thermal lensing under lasing and non-lasing conditions. It is shown that cascaded multiphonon relaxations following each upconversion process generate significant extra heat dissipation in the crystal under non-lasing compared to lasing conditions. Owing to the unfavorable temperature dependence of thermal and thermo-optical parameters, this leads, firstly, to a significant temperature increase in the rod, secondly, to strong thermal lensing with pronounced spherical aberrations and, ultimately, to rod fracture in a high-power end-pumped system. In a three-dimensional finite-element calculation, excitation densities, upconversion rates, heat generation temperature profiles, and thermal lensing are calculated. Differences in thermal lens power between non-lasing and lasing conditions up to a factor of six in Nd:YLF and up to a factor of two in Nd:YAG are experimentally observed and explained by the calculation. This results in a strong deterioration in performance when operating these systems in a Q-switched regime, as an amplifier, or on a low-gain transition. Methods to decrease the influence of interionic upconversion are discussed. It is shown that tuning of the pump wavelength can significantly alter the rod temperature