Separability of a Low-Momentum Effective Nucleon-Nucleon Potential

A realistic nucleon-nucleon potential is transformed into a low-momentum effective one (LMNN) using the Okubo theory. The separable potentials are converted from the LMNN with a universal separable expansion method and a simple Legendre expansion. Through the calculation of the triton binding energies, the separability for the convergence of these ranks is evaluated. It is found that there is a tendency for the lower momentum cutoff parameter $\Lambda$ of LMNN to gain good separability.Comment: 6 pages, 1 tabl

Complex Energy Method in 4-Body Faddeev-Yakubovsky Equations

The Complex Energy Method [Prog. Theor. Phys. {\bf 109}, 869L (2003)] is applied to the 4-body Faddeev-Yakubovsky equations in the 4-nucleon system. We obtain a well converged solution in all energy regions below and above the 4-nucleon break-up threshold.Comment: 4 pages (ReVTeX), 4 figures, Phys. Rev. C, in printin

Long-term field metal extraction by pelargonium:phytoextraction efficiency in relation to plant maturity

The long length of periods required for effective soil remediation via phytoextraction constitutes a weak point that reduces its industrial use. However, these calculated periods are mainly based on short-term and/or hydroponic controlled experiments. Moreover, only a few studies concern more than one metal, although soils are scarcely polluted by only one element.In this scientific context, the phytoextraction of metals and metalloids (Pb, Cd, Zn, Cu,and As) by Pelargonium was measured after a long-term field experiment. Both bulk and rhizosphere soils were analyzed in order to determine the mechanisms involved in soil-root transfer. First, a strong increase in lead phytoextraction was observed with plant maturity, significantly reducing the length of the period required for remediation. Rhizosphere Pb, Zn, Cu, Cd, and As accumulation was observed (compared to bulk soil), indicating metal mobilization by the plant, perhaps in relation to root activity. Moreover, metal phytoextraction and translocation were found to be a function of the metals’ nature. These results, taken altogether, suggest that Pelargonium could be used as a multi-metal hyperaccumulator under multi-metal soil contamination conditions, and they also provide an interesting insight for improving field phytoextraction remediation in terms of the length of time required, promoting this biological technique

Effect of fulvic acids on lead-induced oxidative stress to metal sensitive Vicia faba L. plant

Lead (Pb) is a ubiquitous environmental pollutant capable to induce various morphological, physiological, and biochemical functions in plants. Only few publications focus on the influence of Pb speciation both on its phytoavailability and phytotoxicity. Therefore, Pb toxicity (in terms of lipid peroxidation, hydrogen peroxide induction, and photosynthetic pigments contents) was studied in Vicia faba plants in relation with Pb uptake and speciation. V. faba seedlings were exposed to Pb supplied as Pb(NO3)2 or complexed by two fulvic acids (FAs), i.e. Suwannee River fulvic acid (SRFA) and Elliott Soil fulvic acid (ESFA), for 1, 12, and 24 h under controlled hydroponic conditions. For both FAs, Pb uptake and translocation by Vicia faba increased at low level (5 mg l−1), whereas decreased at high level of application (25 mg l−1). Despite the increased Pb uptake with FAs at low concentrations, there was no influence on the Pb toxicity to the plants. However, at high concentrations, FAs reduced Pb toxicity by reducing its uptake. These results highlighted the role of the dilution factor for FAs reactivity in relation with structure; SRFA was more effective than ESFA in reducing Pb uptake and alleviating Pb toxicity to V. faba due to comparatively strong binding affinity for the heavy metal

Solutions of the Faddeev-Yakubovsky equations for the four nucleons scattering states

The Faddeev-Yakubowsky equations in configuration space have been solved for the four nucleon system. The results with an S-wave interaction model in the isospin approximation are presented. They concern the bound and scattering states below the first three-body threshold. The elastic phase-shifts for the N+NNN reaction in different ($S,T$) channels are given and the corresponding low energy expansions are discussed. Particular attention is payed to the n+t elastic cross section. Its resonant structure is well described in terms of a simple NN interaction. First results concerning the S-matrix for the coupled N+NNN-NN+NN channels and the strong deuteron-deuteron scattering length are obtained.Comment: latex.tar.gz, 36 pages, 10 figures, 11 tables. To be published in Physical Review

Complex-Orbital Order in Fe_3O_4 and Mechanism of the Verwey Transition

Electronic state and the Verwey transition in magnetite (Fe_3O_4) are studied using a spinless three-band Hubbard model for 3d electrons on the B sites with the Hartree-Fock approximation and the exact diagonalisation method. Complex-orbital, e.g., 1/sqrt(2)[|zx> + i |yz>], ordered (COO) states having noncollinear orbital moments ~ 0.4 mu_B on the B sites are obtained with the cubic lattice structure of the high-temperature phase. The COO state is a novel form of magnetic ordering within the orbital degree of freedom. It arises from the formation of Hund's second rule states of spinless pseudo-d molecular orbitals in the Fe_4 tetrahedral units of the B sites and ferromagnetic alignment of their fictitious orbital moments. A COO state with longer periodicity is obtained with pseudo-orthorhombic Pmca and Pmc2_1 structures for the low-temperature phase. The state spontaneously lowers the crystal symmetry to the monoclinic and explains experimentally observed rhombohedral cell deformation and Jahn-Teller like distortion. From these findings, we consider that at the Verwey transition temperature, the COO state remaining to be short-range order impeded by dynamical lattice distortion in high temperature is developed into that with long-range order coupled with the monoclinic lattice distortion.Comment: 16 pages, 13 figures, 6 tables, accepted for publication in J. Phys. Soc. Jp

Foliar lead uptake by lettuce exposed to atmospheric fallouts

Metal uptake by plants occurs by soil−root transfer but also by direct transfer of contaminants from the atmosphere to the shoots. This second pathway may be particularly important in kitchen gardens near industrial plants. The mechanisms of foliar uptake of lead by lettuce (Lactuca sativa) exposed to the atmospheric fallouts of a lead-recycling plant were studied. After 43 days of exposure, the thoroughly washed leaves contained 335 ± 50 mg Pb kg−1 (dry weight). Micro-X-ray fluorescence mappings evidenced Pb-rich spots of a few hundreds of micrometers in diameter located in necrotic zones. These spots were more abundant at the base of the central nervure. Environmental scanning electron microscopy coupled with energy dispersive X-ray microanalysis showed that smaller particles (a few micrometers in diameter) were also present in other regions of the leaves, often located beneath the leaf surface. In addition, submicrometric particles were observed inside stomatal openings. Raman microspectrometry analyses of the leaves identified smelter-originated Pb minerals but also secondary phases likely resulting from the weathering of original particles. On the basis of these observations, several pathways for foliar lead uptake are discussed. A better understanding of these mechanisms may be of interest for risk assessment of population exposure to atmospheric metal contamination

Behavior and Impact of Zirconium in the Soil–Plant System: Plant Uptake and Phytotoxicity

Because of the large number of sites they pollute, toxic metals that contaminate terrestrial ecosystems are increasingly of environmental and sanitary concern (Uzu et al. 2010, 2011; Shahid et al. 2011a, b, 2012a). Among such metals is zirconium (Zr), which has the atomic number 40 and is a transition metal that resembles titanium in physical and chemical properties (Zaccone et al. 2008). Zr is widely used in many chemical industry processes and in nuclear reactors (Sandoval et al. 2011; Kamal et al. 2011), owing to its useful properties like hardness, corrosion-resistance and permeable to neutrons (Mushtaq 2012). Hence, the recent increased use of Zr by industry, and the occurrence of the Chernobyl and Fukashima catastrophe have enhanced environmental levels in soil and waters (Yirchenko and Agapkina 1993; Mosulishvili et al. 1994 ; Kruglov et al. 1996)

Oxidative potential apportionment of atmospheric PM₁: a new approach combining high-sensitive online analysers for chemical composition and offline OP measurement technique

Source apportionment models were widely used to successfully assign highly time-resolved aerosol data to specific emissions and/or atmospheric chemical processes. These techniques are necessary for targeting the sources affecting air quality and for designing effective mitigation strategies. Moreover, evaluation of the toxicity of airborne particulate matter is important since the classically measured particulate matter (PM) concentrations appear insufficient for characterizing the impact on human health. Oxidative potential (OP) measurement has recently been developed to quantify the capability of PM to induce an oxidative imbalance in the lungs. As a result, this measurement unit could be a better proxy than PM mass concentration to represent PM toxicity. In the present study, two source apportionment analyses were performed using positive matrix factorization (PMF) from organic aerosol (OA) mass spectra measured at a 15 min time resolution using a time-of-flight aerosol chemical speciation monitor (ToF-ACSM) and from 19 trace elements measured on an hourly basis using an online metal analyser (Xact 625i). The field measurements were carried out in summer 2018. While it is common to perform PMF studies individually on ACSMs and more recently on Xact datasets, here we used a two-step methodology leading to a complete PM1 source apportionment. The outputs from both OA PMF and Xact PMF, the inorganic species concentrations from the ACSM, and the black carbon (BC) fractions (fossil fuel and wood burning) measured using an Aethalometer (AE33) were gathered into a single dataset and subjected to a combined PMF analysis. Overall, eight factors were identified, each of them corresponding to a more precise source than performing single PMF analyses. The results show that besides the high contribution of secondary ammonium sulfate (28 %) and organic nitrate (19 %), about 50 % of PM1 originated from distinct combustion sources, including emissions from traffic, shipping, industrial activities, cooking, and biomass burning. Simultaneously, PM1 filters were collected during the experimental period on a 4 h sampling basis. On these filters, two acellular OP assays were performed (dithiothreitol; OPDTT and ascorbic acid; OPAA) and an inversion method was applied on factors issued from all PMFs to assess the contribution of the PM sources to the OP. This work highlights the sensitivity of OPAA to industrial and dust resuspension sources and those of OPDTT to secondary ammonium sulfate, shipping, and biomass burning.</p