Potential of different composts to improve soil fertility

Composts can influence soil fertility and plant health. These influences can be positive or negative, depending of the quality of the composts. Some practitioners already make use of the positive effects on plant health. For example, they use composts to protect their plants against soil borne diseases in substrate, or to detoxify and reactivate soil after steaming. In order to estimate the potential of Swiss composts to influence soil fertility and plant health positively, we analyzed one hundred composts representative of the different composting systems and qualities available on the market. The organic substance and the nutrient content of the composts varied greatly between the composts; the materials of origin were the major factor influencing these values. The respiration rate and enzyme activities also varied greatly, particularly in the youngest composts. These differences become smaller when the composts become more mature. Maturity, the degradation stage of the organic matter, depended not only on the age of the compost, but also on the management of the process. The N-mineralization potential from compost added to soil showed that a high proportion of young composts immobilized the nitrogen in the soil. This problem was hardly correlated with the materials of origin, but with the management of the first stage of the composting process. Especially composts which had become too dry in this period lost their ammonia-nitrogen, and hence immobilized nitrogen in the soil. Also composts with a low NO3/NH4 ratio, as a rough indicator for an immature compost, immobilized nitrogen in the soil. By contrast, the phytotoxicity of the composts varied very much also in matured composts, showing that the storage of the compost plays a decisive role. While the majority of compost protected cucumber plants against Pythium ultimum, only a few composts suppressed Rhizoctonia solani in basil. With respect to disease suppression, the management of the maturation process seems to play a major role. In conclusion, big differences in compost quality and of their impact on soil fertility and on plant health were observed. The management of the composting process seems to influence the quality of the composts to a higher extent than the materials of origin or the composting system. More attention should be paid to biological quality of composts, in order to produce composts with more beneficial effects on crops

Absolute differential cross sections for electron-impact excitation of CO near threshold: II. The Rydberg states of CO

Absolute differential cross sections for electron-impact excitation of Rydberg states of CO have been measured from threshold to 3.7 eV above threshold and for scattering angles between 20° and 140°. Measured excitation functions for the b 3Σ+, B 1Σ+ and E 1π states are compared with cross sections calculated by the Schwinger multichannel method. The behaviour of the excitation functions for these states and for the j 3Σ+ and C 1Σ+ states is analysed in terms of negative-ion states. One of these resonances has not been previously reported

Cooperativity Beyond Caging: Generalized Mode Coupling Theory

The validity of mode coupling theory (MCT) is restricted by an uncontrolled factorization approximation of density correlations. The factorization can be delayed and ultimately avoided, however, by explicitly including higher order correlations. We explore this approach within a microscopically motivated schematic model. Analytic tractability allows us to discuss in great detail the impact of factorization at arbitrary order, including the limit of avoided factorization. Our results indicate a coherent picture for the capabilities as well as limitations of MCT. Moreover, including higher order correlations systematically defers the transition and ultimately restores ergodicity. Power-law divergence of the relaxation time is then replaced by continuous but exponential growth.Comment: 4 pages, 2 figure

Design and testing of a high voltage coil for the kicker magnets of CERN's Large Hadron Collider

The Large Hadron Collider (LHC), the world¹s largest proton and lead-ion accelerator, is currently under construction at CERN, Geneva, Switzerland. To extract the particle beams at the end of a physics run and in emergency situations 2 beam abort systems, built of 14 fast high-power kicker magnets each, are required. These magnets will operate at 35 kV and 30 kA with a pulse length of 90 ms and a rise time of 3 ms. A prototype magnet with a single turn high voltage coil has been built and tested. The magnet closely surrounds a ceramic vacuum tube. In order to insert this beam pipe into the magnet, the coil and the magnet have to be built in two halves which can easily be separated. The paper describes the design principles of the high voltage coil, the different options for the coil insulation material, as well as details concerning the adopted manufacturing process. The paper also describes the extensive loss-factor measurements which have been carried out as part of the acceptance tests. Finally it reports on endurance tests of the coil when mounted inside the magnet yoke and working in pulsed mode

Stellar and Gaseous Nuclear Disks Observed in Nearby (U)LIRGs

We present near-infrared integral field spectroscopy of the central kiloparsec of 17 nearby luminous and ultra-luminous infrared galaxies undergoing major mergers. These observations were taken with OSIRIS assisted by the Keck I and II Adaptive Optics systems, providing spatial resolutions of a few tens of parsecs. The resulting kinematic maps reveal gas disks in at least 16 out of 19 nuclei and stellar disks in 11 out of 11 nuclei observed in these galaxy merger systems. In our late-stages mergers, these disks are young (stellar ages $<30$ Myr) and likely formed as gas disks which became unstable to star formation during the merger. On average, these disks have effective radii of a few hundred parsecs, masses between $10^{8}$ and $10^{10} M_{Sun}$, and $v/\sigma$ between 1 and 5. These disks are similar to those created in high-resolution hydrodynamical simulations of gas-rich galaxy mergers, and favor short coalescence times for binary black holes. The few galaxies in our sample in earlier stages of mergers have disks which are larger ($r_{eff}\sim200-1800$ pc) and likely are remnants of the galactic disks that have not yet been completely disrupted by the merger.Comment: accepted for publication in Ap

RCP8.5-projected changes in German Bight storm surge characteristics from regionalized ensemble simulations for the end of the twenty-first century

This study investigates climate-induced changes in height, frequency and duration of storm surges in the German Bight. The regionally coupled climate model system MPIOM-REMO with a focus on the North Sea has been utilized to dynamically downscale 30 members of the global climate model system MPI-ESM1.1-LR for the historical period 1950–2005 and a continuation until 2099 with the RCP8.5 scenario. Results of all members have been collected into the historical (1970–1999) and the rcp85 (2070–2099) data pools amounting to 900 years of the corresponding climate state. The global mean sea level rise was not considered. Nevertheless, the mean ensemble German Bight SSH trend amounts to about 13 ± 1 cm/century (PI control: 3 cm/century) due to adaptation of the ocean circulation to the changing climatic conditions. Storm surges were defined as SSH above mean high tidal water plus 1.5, 2.5, 3.5 m for “regular”, heavy, extreme storm surges, and then clustered to events. Our simulated storm surge events show a clear location-dependent increase in frequency (6–11), median duration (4–24), and average duration (9–20) in the German Bight. Only along the central German Bight coast (Cuxhaven), longer lasting events gain more relevance. Heavy storm surge events show also a strong increase in frequency (7–34) and average duration (10–22). Maximum sea levels during storm events increase strongest and most significant along the northern German Bight and Danish coasts with more than 30 cm/century for the 60-year return period at Hörnum and 10–15 cm/century for shorter return periods. Levels of return periods shorter than a few years significantly increase everywhere along the southern German Bight coasts (around 5 cm/century for the 2-year return period). Highest SSH maxima do not change, and consequently, extreme storm surge events show hardly any response to climate change. Furthermore, our results indicate a shift of seasonality from the last to the first quarter of a year. As the main driver for the encountered alteration of German Bight storm surge characteristics, we identified a change in wind conditions with a pronounced increase of frequency of strong westerly winds

Towards a better representation of the solar cycle in general circulation models

We introduce the improved Freie Universität Berlin (FUB) high-resolution radiation scheme FUBRad and compare it to the 4-band standard ECHAM5 SW radiation scheme of Fouquart and Bonnel (FB). Both schemes are validated against the detailed radiative transfer model libRadtran. FUBRad produces realistic heating rate variations during the solar cycle. The SW heating rate response with the FB scheme is about 20 times smaller than with FUBRad and cannot produce the observed temperature signal. A reduction of the spectral resolution to 6 bands for solar irradiance and ozone absorption cross sections leads to a degradation (reduction) of the solar SW heating rate signal by about 20%. The simulated temperature response agrees qualitatively well with observations in the summer upper stratosphere and mesosphere where irradiance variations dominate the signal. Comparison of the total short-wave heating rates under solar minimum conditions shows good agreement between FUBRad, FB and libRadtran up to the middle mesosphere (60–70 km) indicating that both parameterizations are well suited for climate integrations that do not take solar variability into account. The FUBRad scheme has been implemented as a sub-submodel of the Modular Earth Submodel System (MESSy)