Fault textures in volcanic conduits: evidence for seismic trigger mechanisms during silicic eruptions.

It is proposed that fault textures in two dissected rhyolitic conduits in Iceland preserve evidence for shallow seismogenic faulting within rising magma during the emplacement of highly viscous lava flows. Detailed field and petrographic analysis of such textures may shed light on the origin of long-period and hybrid volcanic earthquakes at active volcanoes. There is evidence at each conduit investigated for multiple seismogenic cycles, each of which involved four distinct evolutionary phases. In phase 1, shear fracture of unrelaxed magma was triggered by shear stress accumulation during viscous flow, forming the angular fracture networks that initiated faulting cycles. Transient pressure gradients were generated as the fractures opened, which led to fluidisation and clastic deposition of fine-grained particles that were derived from the fracture walls by abrasion. Fracture networks then progressively coalesced and rotated during subsequent slip (phase 2), developing into cataclasite zones with evidence for multiple localised slip events, fluidisation and grain size reduction. Phase 2 textures closely resemble those formed on seismogenic tectonic faults characterised by friction-controlled stick-slip behaviour. Increasing cohesion of cataclasites then led to aseismic, distributed ductile deformation (phase 3) and generated deformed cataclasite zones, which are enriched in metallic oxide microlites and resemble glassy pseudotachylite. Continued annealing and deformation eventually erased all structures in the cataclasite and formed microlite-rich flow bands in obsidian (phase 4). Overall, the mixed brittle-ductile textures formed in the magma appear similar to those formed in lower crustal rocks close to the brittle-ductile transition, with the rheological response mediated by strain-rate variations and frictional heating. Fault processes in highly viscous magma are compared with those elsewhere in the crust, and this comparison is used to appraise existing models of volcano seismic activity. Based on the textures observed, it is suggested that patterns of long-period and hybrid earthquakes at silicic lava domes reflect friction-controlled stick-slip movement and eventual healing of fault zones in magma, which are an accelerated and smaller-scale analogue of tectonic faults

Fracture of andesite in the brittle and brittle-ductile transition regimes

see Abstract volum

Melting of the glacier base during a small-volume subglacial rhyolite eruption: evidence from Blahnukur, Iceland.

Although observations of recent volcanic eruptions beneath Vatnajokull, Iceland have improved the understanding of ice deformation and meltwater drainage, little is known about the processes that occur at the glacier base. We present observations of the products of a small-volume, effusive subglacial rhyolite eruption at Blahnukur, Torfajokull, Iceland. Lava bodies, typically 7 m long, have unusual conical morphologies and columnar joint orientations that suggest emplacement within cavities melted into the base of a glacier. Cavities appear to have been steep-walled and randomly distributed. These features can be explained by a simple model of conductive heat loss during the ascent of a lava body to the glacier base. The released heat melts a cavity in the overlying ice. The development of vapour-escape pipes in the waterlogged, permeable breccias surrounding the lava allows rapid heat transfer between lava and ice. The formed meltwater percolates into the breccias, recharging the cooling system and leaving a steam-filled cavity. The slow ascent rates of intrusive rhyolitic magma bodies provide ample time for a cavity to be melted in the ice above, even during the final 10 m of ascent to the glacier base. An equilibrium cavity size is calculated at which melting is balanced by creep closure. This is dependent upon the heat input and the difference between glaciostatic and cavity pressure. The cavity sizes inferred from Blahnukur are consistent with a pressure differential of 2-4 MPa, suggesting that the ice was at least 200 m thick. This is consistent with the volcanic stratigraphy, which indicates that the ice exceeded 350 m in thickness. Although this is the first time that a subglacial cavity system of this type has been reconstructed from an ancient volcanic sequence, it shares many characteristics with the modern firn cave system formed by fumarolic melting within the summit crater of Mount Rainier, Washington. At both localities, it appears that localised heating at the glacier base has resulted in heterogeneous melting patterns. Despite the different rheological properties of ice and firn, similar patterns of cavity roof deformation are inferred. The development of low-pressure subglacial cavities in regions of high heat flux may influence the trajectory of rising magma, with manifold implications for eruptive mechanisms and resultant subglacial volcanic landforms

Using dissolved H₂O in rhyolitic glasses to estimate palaeo-ice thickness during a subglacial eruption at Bláhnúkur(Torfajökull, Iceland)

The last decade has seen the refinement of a technique for reconstructing palaeo-ice thicknesses based on using the retained H2O and CO2 content in glassy eruptive deposits to infer quenching pressures and therefore ice thicknesses. The method is here applied to Bláhnúkur, a subglacially erupted rhyolitic edifice in Iceland. A decrease in water content from ~0.7 wt.% at the base to ~0.3 wt.% at the top of the edifice suggests that the ice was 400 m thick at the time of the eruption. As Bláhnúkur rises 350 m above the surrounding terrain, this implies that the eruption occurred entirely within ice, which corroborates evidence obtained from earlier lithofacies studies. This paper presents the largest data set (40 samples) so far obtained for the retained volatile contents of deposits from a subglacial eruption. An important consequence is that it enables subtle but significant variations in water content to become evident. In particular, there are anomalous samples which are either water-rich (up to 1 wt.%) or water-poor (~0.2 wt.%), with the former being interpreted as forming intrusively within hyaloclastite and the latter representing batches of magma that were volatile-poor prior to eruption. The large data set also provides further insights into the strengths and weaknesses of using volatiles to infer palaeo-ice thicknesses and highlights many of the uncertainties involved. By using examples from Bláhnúkur, the quantitative use of this technique is evaluated. However, the relative pressure conditions which have shed light on Bláhnúkur’s eruption mechanisms and syn-eruptive glacier response show that, despite uncertainties in absolute values, the volatile approach can provide useful insight into the mechanisms of subglacial rhyolitic eruptions, which have never been observed

Thermal Liability of Hyaloclastite in the Krafla Geothermal Reservoir, Iceland:The Impact of Phyllosilicates on Permeability and Rock Strength

Geothermal fields are prone to temperature fluctuations from natural hydrothermal activity, anthropogenic drilling practices, and magmatic intrusions. These fluctuations may elicit a response from the rocks in terms of their mineralogical, physical (i.e., porosity and permeability), and mechanical properties. Hyaloclastites are a highly variable volcaniclastic rock predominantly formed of glass clasts that are produced during nonexplosive quench-induced fragmentation, in both subaqueous and subglacial eruptive environments. They are common in high-latitude geothermal fields as both weak, highly permeable reservoir rocks and compacted impermeable cap rocks. Basaltic glass is altered through interactions with external water into a clay-dominated matrix, termed palagonite, which acts to cement the bulk rock. The abundant, hydrous phyllosilicate minerals within the palagonite can dehydrate at elevated temperatures, potentially resulting in thermal liability of the bulk rock. Using surficial samples collected from Krafla, northeast Iceland, and a range of petrographic, mineralogical, and mechanical analyses, we find that smectite dehydration occurs at temperatures commonly experienced within geothermal fields. Dehydration events at 130, 185, and 600°C result in progressive mass loss and contraction. This evolution results in a positive correlation between treatment temperature, porosity gain, and permeability increase. Gas permeability measured at 1 MPa confining pressure shows a 3-fold increase following thermal treatment at 600°C. Furthermore, strength measurements show that brittle failure is dependent on porosity and therefore the degree of thermal treatment. Following thermal treatment at 600°C, the indirect tensile strength, uniaxial compressive strength, and triaxial compressive strength (at 5 MPa confining pressure) decrease by up to 68% (1.1 MPa), 63% (7.3 MPa), and 25% (7.9 MPa), respectively. These results are compared with hyaloclastite taken from several depths within the Krafla reservoir, through which the palagonite transitions from smectite-to chlorite-dominated. We discuss how temperature-induced changes to the geomechanical properties of hyaloclastite may impact fluid flow in hydrothermal reservoirs and consider the potential implications for hyaloclastite-hosted intrusions. Ultimately, we show that phyllosilicate-bearing rocks are susceptible to temperature fluctuations in geothermal fields. © 2020 Josh Weaver et al

Rapid ascent of rhyolitic magma at Chaitén volcano, Chile

International audienceAlthough rhyolite magma has fuelled some of the Earth's largest explosive volcanic eruptions, our understanding of these events is incomplete due to the previous lack of direct observation of these eruptions. On 1 May 2008, Chaitén volcano in Chile erupted rhyolite magma unexpectedly and explosively. Here, petrological and experimental data are presented that indicate that the hydrous rhyolite magma at Chaitén ascended very rapidly from storage depth to near-surface, with velocities of the order of one metre per second

Post-fragmentation vesiculation timescales in hydrous rhyolitic bombs from Chaitén volcano

Bubble nucleation and growth dynamics exert a primary control on the explosivity of volcanic eruptions. Numerous theoretical and experimental studies aim to capture the complex process of melt vesiculation, whereas textural studies use vesicle populations to reconstruct magma behaviour. However, post-fragmentation vesiculation in rhyolitic bombs can create final quenched bubble (vesicle) textures that are not representative of the nature of fragmenting magma within the conduit. To examine bubble growth in hydrous rhyolitic bombs, we have used heated stage microscopy to directly observe vesiculation of a Chaitén rhyolite melt (with an initial dissolved water content of ~0.95 wt %) at atmospheric pressure and magmatic temperatures upon reheating. Thin wafers of obsidian were held from 5 min up to two days in the heated stage at temperatures between 575 °C and 875 °C. We found that bubble growth rates, measured through changes in bubble diameter, increased with both temperature and bubble size. The average growth rate at the highest temperature of 875 °C is ~1.27 μm s−1, which is substantially faster than the lowest detected growth rate of ~0.02 μm s−1 at 725 °C; below this temperature no growth was observed. Average growth rate Vr follows an exponential relationship with temperature, T and inferred melt viscosity η, where Vr = 5.57×10−7e0.016T and Vr = 3270e−1.117η. Several stages of evolving bubble morphology were directly observed, including initial relaxation of deformed bubbles into spheres, extensive growth of spheres, and, at higher temperatures, close packing and foam formation. Bubble deformation due to bubble-bubble interaction and coalescence was observed in most experiments. We use our simple, experimentally-determined relationship between melt viscosity and bubble growth rates to model post-fragmentation vesicle growth in a cooling 1 m-diameter rhyolitic bomb. The results, which indicate negligible vesicle growth within 2–3 cm of the bomb surface, correspond well with the observed dense margin thickness of a Chaitén bomb of comparable dimensions. The experiments described can be used to effectively reconstruct the post-fragmentation vesiculation history of bombs through simple analytical expressions which provide a useful tool for aiding in the interpretation of pumiceous endmember textures in hydrous rhyolitic bombs

Direct isotopic evidence of biogenic methane production and efflux from beneath a temperate glacier

The base of glaciers and ice sheets provide environments suitable for the production of methane. High pressure conditions beneath the impermeable ‘cap’ of overlying ice promote entrapment of methane reserves that can be released to the atmosphere during ice thinning and meltwater evacuation. However, contemporary glaciers and ice sheets are rarely accounted for as methane contributors through field measurements. Here, we present direct field-based evidence of methane production and release from beneath the Icelandic glacier Sólheimajökull, where geothermal activity creates sub-oxic conditions suited to methane production and preservation along the meltwater flow path. Methane production at the glacier bed (48 tonnes per day, or 39 mM CH4 m−2 day−1), and evasion to the atmosphere from the proglacial stream (41 tonnes per day, or 32 M CH4 m−2 day−1) indicates considerable production and release to the atmosphere during the summer melt season. Isotopic signatures (−60.2‰ to −7.6‰ for δ13CCH4 and −324.3‰ to +161.1‰ for DCH4), support a biogenic signature within waters emerging from the subglacial environment. Temperate glacial methane production and release may thus be a significant and hitherto unresolved contributor of a potent greenhouse gas to the atmosphere

Silicic conduits as supersized tuffisites:Clastogenic influences on shifting eruption styles at Cordón Caulle volcano (Chile)

Understanding the processes that drive explosive-effusive transitions during large silicic eruptions is crucial to hazard mitigation. Conduit models usually treat magma ascent and degassing as a gradual, unidirectional progression from bubble nucleation through magmatic fragmentation. However, there is growing evidence for the importance of bi-directional clastogenic processes that sinter fragmented materials into coherent clastogenic magmas. Bombs that were ejected immediately before the first emergence of lava in the 2011–2012 eruption at Cordón Caulle volcano (Chile) are texturally heterogeneous composite assemblages of welded pyroclastic material. Although diverse in density and appearance, SEM and X-ray tomographic analysis show them all to have been formed by multi-generational viscous sintering of fine ash. Sintering created discrete clasts ranging from obsidian to pumice and formed a pervasive clast-supporting matrix that assembled these clasts into a conduit-sealing plug. An evaluation of sintering timescales reveals texturally disparate bomb components to represent only minutes of difference in residence time within the conduit. Permeability modelling indicates that the plug was an effective conduit seal, with outgassing potential—even from high-porosity regions—being limited by the inability of gas to flow across tendrils of densely sintered inter-clast matrix. Contrary to traditional perspectives, declining expressions of explosivity at the surface need not be preceded or accompanied by a decline in fragmentation efficiency. Instead, they result from tips in balance between the opposing processes of fragmentation and sintering that occur in countless cycles within volcanic conduits. These processes may be particularly enhanced at silicic fissure volcanoes, which have laterally extensive subsurface plumbing systems that require complex magma ascent pathways. The textures investigated here reveal the processes occurring within silicic fissures to be phenomenologically identical to those that have been inferred to occur in tuffisite veins: silicic conduits are essentially supersized examples of edifice-penetrating tuffisites

Rapid and slow: Varying magma ascent rates as a mechanism for Vulcanian explosions

Vulcanian explosions are one of the most common types of volcanic activity observed at silicic volcanoes. Magma ascent rates are often invoked as being the fundamental control on their explosivity, yet this factor is poorly constrained for low magnitude end-member Vulcanian explosions, which are particularly poorly understood, partly due to the rarity of ash samples and low gas fluxes. We describe ash generated by small Vulcanian explosions at Volcán de Colima in 2013, where we document for the first time marked differences in the vesicularity, crystal characteristics (volume fraction, size and shape) and glass compositions in juvenile material from discrete events. We interpret these variations as representing differing ascent styles and speeds of magma pulses within the conduit. Heterogeneous degassing during ascent leads to fast ascending, gas-rich magma pulses together with slow ascending gas-poor magma pulses within the same conduit. This inferred heterogeneity is complemented by SO2 flux data, which show transient episodes of both open and closed system degassing, indicating efficient shallow fracture sealing mechanisms, which allows for gas overpressure to generate small Vulcanian explosions