153 research outputs found
Late Pleistocene and Holocene palaeoenvironments in and around the middle Caspian basin as reconstructed from a deep-sea core
This article has been made available through Open Access by the Brunel Open Access Publishing Fund.Late Pleistocene and/or Holocene high-resolution palynological studies are available for the south basin of the Caspian Sea (CS), the world's largest lake. However, the north and middle basins have not been the object of high-resolution palynological reconstructions. This new study presents the pollen, spores and dinoflagellate cysts records obtained from a 10m-long sediment core recovered in the middle basin, which currently has brackish waters and is surrounded by arid and semi-arid vegetation.An age-depth model built based on six radiocarbon dates on ostracod shells indicates that the sequence spans the period from 14.47 to 2.43cal.kaBP. The present palaeoenvironmental study focuses on the top 666cm, or from 12.44 to 2.43cal.kaBP.At the vegetation level, the Younger Dryas is characterised by an open landscape dominated by desert vegetation composed by Amaranthaceae with shrubs and salt-tolerant plants. However, although the Early Holocene is also characterised by desert vegetation, it is enriched in various shrubs such as Ephedra and Calligonum, but tree expansion is not important at the Holocene onset. After a major shift at 8.19cal.kaBP, the Middle Holocene displays now both the character of desert and of steppe, although some trees such as Quercus and Corylus slightly spread. The Late Holocene records steppe vegetation as dominant, with more tree diversity.Regarding the lacustrine signal, the dinocyst assemblage record fluctuates between slightly brackish conditions highlighted by Pyxidinopsis psilata and Spiniferites cruciformis, and more brackish ones - similar to the present day - with the dominance of Impagidinium caspienense. The Late Pleistocene is characterised by low salinities, related to the Khvalynian highstand. From 11.56cal.kaBP, slightly more saline waters are reconstructed with an increase of I.caspienense for a period of 1000 years, which could be attributed to the Mangyshlak lowstand. From 10.55cal.kaBP, low salinity conditions return with remains such as Anabaena and Botryococcus abundant until 8.83cal.kaBP, followed by a slow, progressive decrease of P. psilata and S. cruciformis until 4.11cal.kaBP, which is the main assemblage change at lacustrine scale. Since then, higher salinities, similar to the present one, are reconstructed. Finally, Lingulodinium machaerophorum starts its development only at 2.75cal.kaBP, in the Late Holocene.The present research revealed fundamental differences from previously published sea-level curves, in that a 6000yr-long highstand suggested by low salinities is shown between 10.55 and 4.11cal.kaBP. Amongst other arguments, using a comparison to a similar palynological regard but in the south basin, a N-S salinity gradient that is the reverse of the present one across the CS, suggests that the Amu Darya was flowing in the CS. Hence the CS levels during the Late Pleistocene and Holocene were influenced by a combination of precipitation over the high European latitudes and the indirect influence of the Indian summer monsoon over the Pamirs. © 2014.This study has been conducted within the European Contract INCO-Copernicus “Understanding the Caspian Sea erratic fluctuations” n IC15-CT96-0112. This was funded by the Centre National de la Recherche Scientifique within the framework of the INSUDYTEC (DYnamique de la Terre et du Climat) Program (France)
The Blue Heron Conference Center at Triton Beach
Along the quiet waters of the Chesapeake is a long-forgotten beachfront park called Triton Beach. Since the 1950's its buildings have been abandoned, slowly succumbing to the Bay's high tides and persistent coastal vegetation. The tract is nearly four hundred acres and contains valuable wetlands which contribute to the beauty of the Chesapeake. But without funding to repair the shore line, this area is in danger of eroding into the Chesapeake. Through a public-private initiative, a small parcel of this property will be allocated to construct a conference center. The small scale of a conference center facility will allow this project to be developed at a finite level and the building details will be the emphasis of the exercise. The delicate nature of the site demands caution and steps will be taken to preserve the natural beauty of the waterfront as viewed from both the park and the Bay
Characterization of anodic bonding
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2004.Includes bibliographical references (p. 149-151).Anodic bonding is a common process used in MicroElectroMechanical Systems (MEMS) device fabrication and packaging. Polycrystalline chemical vapor deposited (CVD) silicon carbide (SiC) is emerging as a new MEMS device and packaging material because of its excellent material properties including high strength, hardness, and thermal conductivity. An alternative, low temperature glass to CVD SiC anodic bonding process is required in order to prevent gold tin braze stress relaxation. A novel process recipe, requiring a SiC RMS surface roughness of 45nm, was developed for anodically bonding CVD SiC to bulk and thin-film, lapped Pyrex[TM] and Hoya SD-2[TM] glass substrates. The bond quality, residual curvature, and microstructured interfacial features for CVD SiC anodic bonding were shown to be comparable to single crystal silicon (Si) anodic bonding. The Plaza Test specimen, invented by Plaza et al., was used to assess bulk and thin-film, lapped glass bond quality. A two-part contact/bonding model was used to predict the contact and bonding of the Plaza Test structures. Surface contact was predicted by a parallel plate capacitor pull-in model after the voltage was applied, and linear elastic fracture mechanics (FEA) modeling predicted the toughness or work-of-adhesion of the bonded surfaces after the formation of a permanent silicon dioxide bond. The role of the voltage, structure geometry, work of adhesion, and materials used in the model predicted that the bonding mechanism limited the total number of structures that remained bonded. thin-film, lapped glass bond quality improved when increasing the voltage and time. The calculated, experimental, and modeled thermoelastic curvatures were minimal, indicating low residual stress(cont.) between the bonded materials. Finally, microscopy and elemental analysis showed distinct differences in elemental depletion band(s) of bulk Pyrex[TM] and Hoya SD-2[TM] glasses bonded to Si, and in interfacial bonding between Pyrex[TM] and CVD SiC compared to Pyrex[TM] and Si. More elements in the glass network are identified as participating in the depletion layer process than identified in previous studies. Overall, the process recipes, modeling, experimental work, and chemical analysis of glass to CVD SiC anodic bonding showed that CVD SiC can be bonded successfully and be a promising packaging material.by Carissa Debra Tudryn.S.M
Lingulodinium machaerophorum expansion over the last centuries in the Caspian Sea reflects global warming
This article is made available through the Brunel Open Access Publishing Fund. Copyright @ Author(s) 2012. This work is distributed
under the Creative Commons Attribution 3.0 License.We analysed dinoflagellate cyst assemblages in four short sediment cores, two of them dated by radionuclides, taken in the south basin of the Caspian Sea. The interpretation of the four sequences is supported by a collection of 27 lagoonal or marine surface sediment samples. A sharp increase in the biomass of the dinocyst occurs after 1967, especially owing to Lingulodinium machaerophorum. Considering nine other cores covering parts or the whole of Holocene, this species started to develop in the Caspian Sea only during the last three millennia. By analysing instrumental data and collating existing reconstructions of sea level changes over the last few millennia, we show that the main forcing of the increase of L. machaerophorum percentages and of the recent dinocyst abundance is global climate change, especially sea surface temperature increase. Sea level fluctuations likely have a minor impact. We argue that the Caspian Sea has entered the Anthropocene
A Motor Drive Electronics Assembly for Mars Curiosity Rover: An Example of Assembly Qualification for Extreme Environments
This paper describes the technology development and infusion of a motor drive electronics assembly for Mars Curiosity Rover under space extreme environments. The technology evaluation and qualification as well as space qualification of the assembly are detailed and summarized. Because of the uncertainty of the technologies operating under the extreme space environments and that a high level reliability was required for this assembly application, both component and assembly board level qualifications were performed
From the Allerød to the mid-Holocene: Palynological evidence from the south basin of the Caspian Sea
This article has been made available through the Brunel Open Access Publishing Fund. Copyright @ The Authors. This is an open-access article distributed under the terms of the Creative
Commons Attribution-NonCommercial-No Derivative Works License, which permits
non-commercial use, distribution, and reproduction in any medium, provided
the original author and source are credited.Pollen and dinoflagellate cysts have been analysed in a core from the south basin of the Caspian Sea, providing a picture of respectively past vegetation and water salinity for the Late Pleistocene to middle Holocene. A relatively sharp lithological change at 0.86 m depth reflects a shift from detrital silts to carbonates-rich fine silts. From this depth upwards, a Holocene chronology is built based on ten radiocarbon dates on ostracod shells and bulk carbonates. From the vegetation point of view, the Late Pleistocene deserts and steppes were partially replaced in the most sheltered areas by an open woodland with Pinus, Juniperus-Hippophae-Elaeagnus and even Alnus-Quercus-Pterocarya and Fraxinus, related to the Allerød palynozone. This was interrupted by the Younger Dryas palynozone when Artemisia reaches a maximum in a first instance followed by a very dry phase with only a slight return of Pinus and Quercus and the rare presence of Ulmus-Zelkova. From 11.5 to 8.4 cal. ka BP, an open landscape dominated by shrubs such as Ephedra and progressively increasing Quercus appeared. The final spread of diverse evergreen and deciduous trees is delayed and occurs after 8.4 cal. ka BP. It is suggested that this delay is caused by an arid climate in the Early Holocene linked to high insolation and perhaps to a lake effect. The dinocyst assemblages fluctuate between slightly brackish (Pyxidinopsis psilata and Spiniferites cruciformis, 7 psu and lower) and more brackish (Impagidinium caspienense, ∼13 psu). In the Lateglacial (Khvalynian highstand), the assemblages remained dominated by relative low salinity taxa. A late and brief increase of salinity occurred prior to 11.2 cal. ka BP associated with the Mangyshlak lowstand. It is suggested that it was caused by a brief drop in meltwater flow from both the north and the southeast (Uzboy) and a likely evaporation increase. This lowstand occurs quasi at the same time as the end of a longer lowstand in the Black Sea. The freshest waters are then inferred as having occurred between 8.4 and ≤4.4 cal. ka BP, linked to a connection with the Amu Darya and the melting glaciers on the Pamir Mountains. The Caspian Sea is a sensitive environment, easily perturbed by global climatic changes, such as the Allerød and Holocene warming, and the Lateglacial and Younger Dryas cooling, as well as by regional changes in its hydrography, such as shifts in the Eurasian meltwater and the Volga and Amu Darya inflows.Centre National de la Recherche Scientifique, Franc
The Ponto-Caspian basin as a final trap for southeastern Scandinavian Ice-Sheet meltwater
This paper provides new data on the evolution of the Caspian Sea and Black Sea from the Last Glacial Maximum until ca. 12 cal kyr BP. We present new analyses (clay mineralogy, grain-size, Nd isotopes and pollen) applied to sediments from the river terraces in the lower Volga, from the middle Caspian Sea and from the western part of the Black Sea. The results show that during the last deglaciation, the Ponto-Caspian basin collected meltwater and fine-grained sediment from the southern margin of the Scandinavian Ice Sheet (SIS) via the Dniepr and Volga Rivers. It induced the deposition of characteristic red-brownish/chocolate-coloured illite-rich sediments (Red Layers in the Black Sea and Chocolate Clays in the Caspian Sea) that originated from the Baltic Shield area according to Nd data. This general evolution, common to both seas was nevertheless differentiated over time due to the specificities of their catchment areas and due to the movement of the southern margin of the SIS. Our results indicate that in the eastern part of the East European Plain, the meltwater from the SIS margin supplied the Caspian Sea during the deglaciation until ∼13.8 cal kyr BP, and possibly from the LGM. That led to the Early Khvalynian transgressive stage(s) and Chocolate Clays deposition in the now-emerged northern flat part of the Caspian Sea (river terraces in the modern lower Volga) and in its middle basin. In the western part of the East European Plain, our results confirm the release of meltwater from the SIS margin into the Black Sea that occurred between 17.2 and 15.7 cal kyr BP, as previously proposed. Indeed, recent findings concerning the evolution of the southern margin of the SIS and the Black Sea, show that during the last deglaciation, occurred a westward release of meltwater into the North Atlantic (between ca. 20 and 16.7 cal kyr BP), and a southward one into the Black Sea (between 17.2 and 15.7 cal kyr BP). After the Red Layers/Chocolate Clays deposition in both seas and until 12 cal kyr BP, smectite became the dominant clay mineral. The East European Plain is clearly identified as the source for smectite in the Caspian Sea sediments. In the Black Sea, smectite originated either from the East European Plain or from the Danube River catchment. Previous studies consider smectite as being only of Anatolian origin. However, our results highlight both, the European source for smectite and the impact of this source on the depositional environment of the Black Sea during considered period
A rock magnetic profile through the ejecta flap of the Lockne impact crater (central Sweden) and implications for the impact excavation process
- …