DESIGN OF EXPERIMENTS MODEL FOR THE OPTIMIZATION OF SILK FIBROIN BASED NANOPARTICLES

Objective: Silk fibroin based nanoparticles have been utilized extensively in biomedical fields. Amongst many preparation methods, desolvation is a favorable one. However, this method yields nanoparticles with unpredictable parameters. Thus, this investigation aimed to systematically study the effects of three independent variables including fibroin concentration (% w/v, X1), volume ratio between fibroin solution and ethanol (X2), formulation time (h, X3) on three main responses, particle size (nm, Y1), polydispersity index (Y2), zeta potential (mV, Y3).Methods: Fibroin was extracted from degummed Bombyx mori silk. The fibroin calibration curve was constructed by UV-spectrophotometer at 276 nm. The nanoparticles were prepared using the desolvation method of aqueous fibroin solution in ethanol. Design Expert® software was used to design the model. The mean particle size, polydispersity index and zeta potential were determined using ZetaPALS®analyzer.Results: By using D-optimal design with the quadratic model, the results showed that all X1, X2, and X3 variables had significant impacts on the fibroin nanoparticles characteristics Y1, Y2, and Y3. The generated model was also validated and demonstrated to be solid and reliable. The obtained optimal nanoparticles possessed Y1 of 238.1 nm, Y2 of 0.12, and Y3of-21.78 mV, which were in agreement with the predicted values, 224.8 nm, 0.13 and-19.31 mV, respectively. The optimal actual and theoretical particle characteristics were correlated with a desirable value of R2 = 0.8770. Conclusion: The D-optimal design proved its effectiveness in the prediction and optimization of fibroin nanoparticle properties

NOVEL HPLC-UV METHOD USING VOLATILE BUFFER FOR SIMULTANEOUS DETERMINATION OF AMLODIPINE BESYLATE AND ATORVASTATIN CALCIUM

Objective: The purpose of this work was to develop and validate a novel HPLC-UV method using triethylamine (TEA) as a volatile buffer for simultaneous determination of amlodipine besylate (AML) and atorvastatin calcium (ATV).Methods: System suitability, linearity, limit of detection (LOD), limit of quantification (LOQ), selectivity, accuracy, and precision was validated using Hitachi L-2000 system with detector: DAD L-2455 at a detected wavelength of 245 nm. Stationary phase: Phenomenex Luna RP-C18 (250 mm x 4.6 mm, 5 µm) and mobile phase: acetonitrile-methanol-TEA pH 4.0 (ratio 52:18:30 v/v/v) were used. Samples' volume of 20 µl was run at room temperature with the flow rate at 1 ml/min.Results: The linearity demonstrated good correlation in the concentration range at 2-40 ppm and 4-80 ppm for AML and ATV, respectively. The method was repeatable with relative standard deviation (RSD) of the intermediate precision test less than 1%. The recovery rate was 100.03% and 99.58% for AML and ATV, respectively. The method was also validated for dissolution studies with excellent compatibility.Conclusion: A new, simple and easy HPLC-UV method was successfully developed and validated for the determination of AML and ATV in both quantification test and dissolution test.Keywords: Amlodipine, Atorvastatin, Simultaneous, Dissolution, HPLC, Quantification, Volatile buffe

Synthesis of cuprous oxide nanocubes combined with chitosan nanoparticles and its application to p-nitrophenol degradation

For the first time, cuprous oxide nanocubes (Cu2O NCBs) were successfully combined with chitosan nanoparticles (CS NPs) to generate Cu2O NCBs/CS NPs composites material with highly optical property and photocatalytic activity using a simple and eco-friendly synthetic approach at room temperature for 30 min. The synthesized Cu2O NCBs NPs/CS NPs were determined characterizations by Ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X – ray Diffraction (XRD),  Transmission Electron Microscope (TEM) and Energy-dispersive X-ray spectroscopy (EDX). Results show that the Cu2O NCBs/CS NPs composites have an average particle size of ~3-5 nm; in which, Cu2O has the form of nanocubes (Cu2O NCBs) with size ~3-4 nm and chitosan nanoparticles with spherical shape (CS NPs) with size ~4-5 nm. In addition, the percent (%) composition of elements present in Cu2O NCBs/CS NPs composites material have been obtained respective: Cu (23.99%), O (38.18%), and C (33.61%). Moreover, Cu2O NCBs/CS NPs composites material was also investigated for photocatalytic activity applied in p-nitrophenol degradation. The obtained results showed that the catalytic capability of Cu2O NCBs/CS NPs for p-nitrophenol reduction reached the highest efficiency >55% in the treatment time of 25 min, and this efficiency was higher than that result of using ZnO@chitosan nanoparticles (ZnO@CS NPs) catalyst under the same conditions for comparison

Antibacterial hydrogel containing Piper betle L. extract for acne treatment, an ex vivo investigation

The current treatments of acne vulgaris and acne-like disorders such as gram-negative folliculitis possess lots of unwanted side effects. Thus, alternative approach of utilizing natural plant extracts, specifically Piper betle L., have gained much attention. To this end, this work developed, characterized, and ex vivo evaluated novel antibiotics hydrogels containing P. betle L. leaf extract for acne treatment. Firstly, the design of experiments (DoE) D-optimal method was successfully developed, optimized, and validated, to investigate the relationship between P. betle L. extraction conditions and the extract properties. Secondly, the best extract was encapsulated in the hydrogel formulations composed of carbopol 940, propylene glycol, and cocamidopropyl betaine. Finally, the hydrogel was ex vivo determined its antibacterial activity on bacteria isolated from 15 patient acne samples. The optimal extraction condition being an extraction solvent/plant weight ratio of 4.034:1, an extraction time of 2.147 h, and a water extract volume of 91.4 mL. This condition yielded an extract total phenolic content of 3.337±0.034 g GAE/g, and minimum inhibitory concentrations of 32 µg/mL and 128 µg/mL on Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922, respectively. The hydrogel possessed suitable properties for a topical medication, including a viscosity of 6800 cps, a pH of 7.0, and a good foaming ability, at both 10°C, 25°C, and 40°C. The hydrogel showed higher antibacterial activity than the positive controls in both gram-positive and gram-negative bacteria. Conclusively, the hydrogel could become a potential pharmaceutical product for acne treatment

Experiment and FEM Modelling of Bond Behaviors between Pre-stressing Strands and Ultra–High–Performance Concrete

The objective of this paper is to investigate the bond properties of prestressing strands embedded in Ultra–High–Performance Concrete (UHPC).The UHPC was made in laboratory using local materials in Vietnam.Its mixture contains: silica aggregates, portland cement PC40, fly ash, silica fume, polycarboxylate superplasticizer and the micro steel fibers.The experimental process is realized on a pull-out test. The volume fraction of micro steel fibers in UHPC was 2%. The prestressing strand with diameters of 15.2mm was considered. The interface shear strength between strand and UHPC is identified based on the results of force and displacement obtained during the pull-out test. The Cohesive Zone Model (CZM) is implemented in finite element model to study this interface behavior. This model described by a piecewise linear elastic law. The CZM’s parameters are identified based on experimental results of pull-out test.The numerical studies are used the CZM in ANSYS software. Two numerical tests are realized and compared with experimental results: pull-out test and other test to verify the deflection of I girder due to prestressing force

Experiment and FEM Modelling of Bond Behaviors between Pre-stressing Strands and Ultra–High–Performance Concrete

The objective of this paper is to investigate the bond properties of prestressing strands embedded in Ultra–High–Performance Concrete (UHPC).The UHPC was made in laboratory using local materials in Vietnam.Its mixture contains: silica aggregates, portland cement PC40, fly ash, silica fume, polycarboxylate superplasticizer and the micro steel fibers.The experimental process is realized on a pull-out test. The volume fraction of micro steel fibers in UHPC was 2%. The prestressing strand with diameters of 15.2mm was considered. The interface shear strength between strand and UHPC is identified based on the results of force and displacement obtained during the pull-out test. The Cohesive Zone Model (CZM) is implemented in finite element model to study this interface behavior. This model described by a piecewise linear elastic law. The CZM’s parameters are identified based on experimental results of pull-out test.The numerical studies are used the CZM in ANSYS software. Two numerical tests are realized and compared with experimental results: pull-out test and other test to verify the deflection of I girder due to prestressing force

Use of and attitudes towards herbal medicine during the COVID-19 pandemic: a cross-sectional study in Vietnam

IntroductionHerbal medicine has a long and rich history of practice in Vietnam. However, research on this topic is limited, especially in relation to the COVID-19 pandemic. This study aimed to explore (1) the prevalence and indication for herbal medicine use, (2) factors associated with herbal medicine use, and (3) people's attitude toward the herbal medicine within the Vietnamese population.MethodsA cross-sectional online survey was conducted in Vietnamese adults aged 18 years and older, distributed equally across the Northern, Central, and Southern regions of Vietnam, between September and October 2020. Descriptive statistics, chi-square tests, and univariate and multivariate logistic regression analyses were performed to achieve the study objectives.ResultsNearly half of the respondents reported using herbal medicine for common illnesses during the COVID-19 pandemic. The prevalence was strongly associated with marital status, urbanicity, monthly income, and health status perception. Ginger (Zingiber officinale Rosc.), honey (Mel), garlic (Allium sativum L.), and perilla (Perilla frutescens (L.) Britt.) were the most commonly used herbal medicines, mainly for the treatment of sore throat, cough, nasal congestion, and fever. Nearly 70% of the participants believed herbal medicines to be safe, to have less side effects than conventional medicines, and to be effective for minor health conditions.ConclusionThe use of herbal medicine during the COVID-19 pandemic was a common practice among Vietnamese people. These findings may have implications for future medical research in Vietnam, and for policy-makers and those in the pharmaceutical industry with regard to future regulations and product development

Bào chế hệ vi hạt từ fibroin tơ tằm phối trộn polymer định hướng ứng dụng dẫn truyền thuốc đường uống

Fibroin tơ tằm là một vật liệu y sinh đã được ứng dụng phổ biến trên thế giới. Tuy nhiên, vẫn còn ít nghiên cứu đề cập đến việc bào chế hệ vi hạt từ fibroin nhằm dẫn truyền thuốc đường uống. Đây là lý do để nghiên cứu này được thực hiện. Fibroin đã được chiết thành công từ kén tơ tằm Việt Nam với hiệu suất chiết 20,08% với các đặc tính lý hóa đặc trưng của phân tử fibroin. Hệ vi hạt fibroin phối trộn poly(vinyl alcohol) và Eudragit E100 được bào chế thành công bằng phương pháp đổi dung môi với kích thước nano và bền vững trong môi trường mô phỏng đường tiêu hóa. Cấu trúc hệ được phân tích bằng quang phổ hồng ngoại (Fourier-transform infrared spectroscopy, FT-IR) cho thấy đầy đủ các mũi đặc trưng của các thành phần trong hệ. Hình dạng hệ vi hạt được quan sát bằng hiển vi điện tử quét (SEM) cho thấy hệ có dạng hình cầu. Tóm lại, nghiên cứu đã bào chế thành công hệ vi hạt từ fibroin tơ tằm phối trộn polymer định hướng dẫn truyền thuốc đường uống

Ngu-Vi-Tieu-Khat decoction, a Vietnamese traditional medicine, possesses hypoglycemic and hypolipidemic effects on streptozotocin-induced type-2 diabetic rat model

This study aims to assess the hypoglycemic effects of Ngu-Vi-Tieu-Khat (NVTK) decoction, a traditional Vietnamese medicine, in a rat model of type-2 diabetes. The NVTK decoction was prepared using the maceration method and tested for its hypoglycemic effects by measuring blood glucose levels, insulin resistance indicators, and pancreatic mass. The results showed that NVTK decoction improved diabetes symptoms, increased insulin levels, reduced insulin resistance, restored pancreatic mass, and decreased total cholesterol (TC), triglycerides (TG) and low-density lipoprotein cholesterol (LDL-C) while increasing high-density lipoprotein cholesterol (HDL-C). The hypoglycemic effects of NVTK were comparable to those of gliclazide at a dose of 10 mg/kg. In conclusion, NVTK decoction possesses hypoglycemic properties and could be explored as a potential traditional medicine for treating type-2 diabetes in humans

Pathogenic Escherichia coli Possess Elevated Growth Rates under Exposure to Sub-Inhibitory Concentrations of Azithromycin.

Antimicrobial resistance (AMR) has been identified by the World Health Organization (WHO) as one of the ten major threats to global health. Advances in technology, including whole-genome sequencing, have provided new insights into the origin and mechanisms of AMR. However, our understanding of the short-term impact of antimicrobial pressure and resistance on the physiology of bacterial populations is limited. We aimed to investigate morphological and physiological responses of clinical isolates of E. coli under short-term exposure to key antimicrobials. We performed whole-genome sequencing on twenty-seven E. coli isolates isolated from children with sepsis to evaluate their AMR gene content. We assessed their antimicrobial susceptibility profile and measured their growth dynamics and morphological characteristics under exposure to varying concentrations of ciprofloxacin, ceftriaxone, tetracycline, gentamicin, and azithromycin. AMR was common, with all organisms resistant to at least one antimicrobial; a total of 81.5% were multi-drug-resistant (MDR). We observed an association between resistance profile and morphological characteristics of the E. coli over a three-hour exposure to antimicrobials. Growth dynamics experiments demonstrated that resistance to tetracycline promoted the growth of E. coli under antimicrobial-free conditions, while resistance to the other antimicrobials incurred a fitness cost. Notably, antimicrobial exposure heterogeneously suppressed bacterial growth, but sub-MIC concentrations of azithromycin increased the maximum growth rate of the clinical isolates. Our results outline complex interactions between organism and antimicrobials and raise clinical concerns regarding exposure of sub-MIC concentrations of specific antimicrobials