11,835 research outputs found
New Measurements of Venus Winds with Ground-Based Doppler Velocimetry at CFHT
operations with observations from the ground using various techniques and spectral domains (Lellouch and Witasse, 2008). We present an analysis of Venus Doppler winds at cloud tops based on observations made at the Canada France Hawaii 3.6-m telescope (CFHT) with the ESPaDOnS visible spectrograph. These observations consisted of high-resolution spectra of Fraunhofer lines in the visible range (0.37-1.05 μm) to measure the winds at cloud tops using the Doppler shift of solar radiation scattered by cloud top particles in the observer's direction (Widemann et al., 2007, 2008). The observations were made during 19-20 February 2011 and were coordinated with Visual Monitoring Camera (VMC) observations by Venus Express. The complete optical spectrum was collected over 40 spectral orders at each point with 2-5 seconds exposures, at a resolution of about 80000. The observations included various points of the dayside hemisphere at a phase angle of 67°, between +10° and -60° latitude, in steps of 10° , and from +70° to -12° longitude relative to sub-Earth meridian in steps of 12°. The Doppler shift measured in scattered solar light on Venus dayside results from two instantaneous motions: (1) a motion between the Sun and Venus upper cloud particles; (2) a motion between the observer and Venus clouds. The measured Doppler shift, which results from these two terms combined, varies with the planetocentric longitude and latitude and is minimum at meridian ΦN = ΦSun - ΦEarth where the two components subtract to each other for a pure zonal regime. Due to the need for maintaining a stable velocity reference during the course of acquisition using high resolution spectroscopy, we measure relative Doppler shifts to ΦN. The main purpose of our work is to provide variable wind measurements with respect to the background atmosphere, complementary to simultaneous measurements made with the VMC camera onboard the Venus Express. We will present first results from this work, comparing with previous results by the CFHT/ESPaDOnS and VLT-UVES spectrographs (Machado et al., 2012), with Galileo fly-by measurements and with VEx nominal mission observations (Peralta et al., 2007, Luz et al., 2011). Acknowledgements: The authors acknowledge support from FCT through projects PTDC/CTE-AST/110702/2009 and PEst-OE/FIS/UI2751/2011. PM and TW also acknowledge support from the Observatoire de Paris. Lellouch, E., and Witasse, O., A coordinated campaign of Venus ground-based observations and Venus Express measurements, Planetary and Space Science 56 (2008) 1317-1319. Luz, D., et al., Venus's polar vortex reveals precessing circulation, Science 332 (2011) 577-580. Machado, P., Luz, D. Widemann, T., Lellouch, E., Witasse, O, Characterizing the atmospheric dynamics of Venus from ground-based Doppler velocimetry, Icarus, submitted. Peralta J., R. Hueso, A. Sánchez-Lavega, A reanalysis of Venus winds at two cloud levels from Galileo SSI images, Icarus 190 (2007) 469-477. Widemann, T., Lellouch, E., Donati, J.-F., 2008, Venus Doppler winds at Cloud Tops Observed with ESPaDOnS at CFHT, Planetary and Space Science, 56, 1320-1334
Recommended from our members
TX-100 manufacturing final project report.
This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and Twist-Coupled Prototype project. The TX-100 blade is a 9 meter prototype blade designed with bend-twist coupling to augment the mitigation of peak loads during normal turbine operation. This structural coupling was achieved by locating off axis carbon fiber in the outboard portion of the blade skins. The report will present the tooling selection, blade production, blade instrumentation, blade shipping and adapter plate design and fabrication. The baseline blade used for this project was the ERS-100 (Revision D) wind turbine blade. The molds used for the production of the TX-100 were originally built for the production of the CX-100 blade. The same high pressure and low pressure skin molds were used to manufacture the TX-100 skins. In order to compensate for the difference in skin thickness between the CX-100 and the TX-100, however, a new TX-100 shear web plug and mold were required. Both the blade assembly fixture and the root stud insertion fixture used for the CX-100 blades could be utilized for the TX-100 blades. A production run of seven TX-100 prototype blades was undertaken at TPI Composites during the month of October, 2004. Of those seven blades, four were instrumented with strain gauges before final assembly. After production at the TPI Composites facility in Rhode Island, the blades were shipped to various test sites: two blades to the National Wind Technology Center at the National Renewable Energy Laboratory in Boulder, Colorado, two blades to Sandia National Laboratory in Albuquerque, New Mexico and three blades to the United States Department of Agriculture turbine field test facility in Bushland, Texas. An adapter plate was designed to allow the TX-100 blades to be installed on existing Micon 65/13M turbines at the USDA site. The conclusion of this program is the kick-off of the TX-100 blade testing at the three testing facilities
Geometric interpretation of the Pancharatnam connection and non-cyclic polarization changes
If the state of polarization of a monochromatic light beam is changed in a cyclical manner, the beam acquires-in addition to the usual dynamic phase-a geometric phase. This geometric or Pancharatnam-Berry phase equals half the solid angle of the contour traced out on the Poincaré sphere. We show that such a geometric interpretation also exists for the Pancharatnam connection, the criterion according to which two beams with different polarization states are said to be in phase. This interpretation offers what is to our knowledge a new and intuitive method to calculate the geometric phase that accompanies non-cyclic polarization changes. © 2010 Optical Society of America
Measurement matters: An individual differences examination of family socioeconomic factors, latent dimensions of children\u27s experiences, and resting state functional brain connectivity in the ABCD sample
The variation in experiences between high and low-socioeconomic status contexts are posited to play a crucial role in shaping the developing brain and may explain differences in child outcomes. Yet, examinations of SES and brain development have largely been limited to distal proxies of these experiences (e.g., income comparisons). The current study sought to disentangle the effects of multiple socioeconomic indices and dimensions of more proximal experiences on resting-state functional connectivity (rsFC) in a sample of 7834 youth (aged 9-10 years) from the Adolescent Brain Cognitive Development (ABCD) study. We applied moderated nonlinear factor analysis (MNLFA) to establish measurement invariance among three latent environmental dimensions of experience (material/economic deprivation, caregiver social support, and psychosocial threat). Results revealed measurement biases as a function of child age, sex, racial group, family income, and parental education, which were statistically adjusted in the final MNLFA scores. Mixed-effects models demonstrated that socioeconomic indices and psychosocial threat differentially predicted variation in frontolimbic networks, and threat statistically moderated the association between income and connectivity between the dorsal and ventral attention networks. Findings illuminate the importance of reducing measurement biases to gain a more socioculturally-valid understanding of the complex and nuanced links between socioeconomic context, children\u27s experiences, and neurodevelopment
On the relativistic L-S coupling
The fact that the Dirac equation is linear in the space and time derivatives
leads to the coupling of spin and orbital angular momenta that is of a pure
relativistic nature. We illustrate this fact by computing the solutions of the
Dirac equation in an infinite spherical well, which allows to go from the
relativistic to the non-relativistic limit by just varying the radius of the
well.Comment: LateX2e, 12 pages, 1 figure, accepted in Eur. J. Phy
Rotations associated with Lorentz boosts
It is possible to associate two angles with two successive non-collinear
Lorentz boosts. If one boost is applied after the initial boost, the result is
the final boost preceded by a rotation called the Wigner rotation. The other
rotation is associated with Wigner's O(3)-like little group. These two angles
are shown to be different. However, it is shown that the sum of these two
rotation angles is equal to the angle between the initial and final boosts.
This relation is studied for both low-speed and high-speed limits. Furthermore,
it is noted that the two-by-two matrices which are under the responsibility of
other branches of physics can be interpreted in terms of the transformations of
the Lorentz group, or vice versa. Classical ray optics is mentioned as a case
in point.Comment: LaTeX, 16 Pages, 4 epsfigure
Wigner Trajectory Characteristics in Phase Space and Field Theory
Exact characteristic trajectories are specified for the time-propagating
Wigner phase-space distribution function. They are especially simple---indeed,
classical---for the quantized simple harmonic oscillator, which serves as the
underpinning of the field theoretic Wigner functional formulation introduced.
Scalar field theory is thus reformulated in terms of distributions in field
phase space. Applications to duality transformations in field theory are
discussed.Comment: 9 pages, LaTex2
Growth Of Tungsten Selenide Films Through Pyrolytic Conversion And Anodic Electrooxidation Of Ammonium Selenotungstate ((NH4)2WSe4)
WxSey thin films have been prepared by the spray pyrolysis and anodic electrodeposition of solutions of ammonium selenotungstate, (NH4)2WSe4, with y/x usually between two and three for the sprayed films and y x\u3e\u3e1 for the electrodeposited films. The sprayed films indicated regions of crystalline WSe2 and have optical absorbance spectra consistent with a mixture of WSe2, WSe3, and selenium. The electrodeposited films are totally amorphous, highly photoconductive, and have optical absorbance spectra typical of amorphous or vitreous selenium. The sprayed films transform into WO3 at temperatures greater than 350°C in the presence of oxygen wile the electrode-posited films tend to evaporate and/or decompose upon annealing. © 1985
- …