108 research outputs found
Drop impact dynamics on slippery liquid-infused porous surfaces: influence of oil thickness
Slippery liquid-infused porous surfaces (SLIPS) are porous nanostructures
impregnated with a low surface tension lubricant. They have recently shown
great promise in various applications that require non-wettable
superhydrophobic surfaces. In this paper, we investigate experimentally the
influence of the oil thickness on the wetting properties and drop impact
dynamics of new SLIPS. By tuning the thickness of the oil layer deposited
through spin-coating, we show that a sufficiently thick layer of oil is
necessary to avoid dewetting spots on the porous nanostructure and thus
increasing the homogeneity of the liquid distribution. Drop impact on these
surfaces is investigated with a particular emphasis on the spreading and
rebound dynamics when varying the oil thickness and the Weber number
About the plastic response of silicate glasses at the micronscale
Despite their brittleness, silicate glasses undergo plastic deformation at the micron scale. Mechanical contact and indentation are the most common situations of interest. The plasticity of glasses is characterized not only by shear flow but also by a permanent densification process.
We present novel observations of the deformation and fracture of amorphous silica micropillars of various sizes using In Situ SEM Micro-Compression (Fig 1), that can help better understand the mechanisms occurring prior to its fracture [1]. Exhibiting one of the highest ratios of shear stress on shear modulus, fused silica thus further distinguishes itself from other amorphous materials. Moreover, nanocompression allows successful observations of crack initiation and growth.
In parallel to this experimental investigation, atomistic simulations [2] aiming to investigate the theoretical plastic response of silicate glasses under coupled shear-pressure stress state was run. The results were interpreted in terms of volumetric and shear hardening. A buckling-like behaviour is clearly evidenced at low density (large free-volume) whereas a BMG-like is observed for samples densified until saturation.
Thanks to this rich set of data, it seems now possible to define a constitutive model taking into account both nanomechanical results, i.e. nanopillars, nanoindentation, diamond anvil cell, and molecular dynamics simulation
Despite their brittleness, silicate glasses undergo plastic deformation at the micron scale. Mechanical contact and indentation are the most common situations of interest. The plasticity of glasses is characterized not only by shear flow but also by a permanent densification process.
We present novel observations of the deformation and fracture of amorphous silica micropillars of various sizes using In Situ SEM Micro-Compression (Fig 1), that can help better understand the mechanisms occurring prior to its fracture [1]. Exhibiting one of the highest ratios of shear stress on shear modulus, fused silica thus further distinguishes itself from other amorphous materials. Moreover, nanocompression allows successful observations of crack initiation and growth.
In parallel to this experimental investigation, atomistic simulations [2] aiming to investigate the theoretical plastic response of silicate glasses under coupled shear-pressure stress state was run. The results were interpreted in terms of volumetric and shear hardening. A buckling-like behaviour is clearly evidenced at low density (large free-volume) whereas a BMG-like is observed for samples densified until saturation.
Thanks to this rich set of data, it seems now possible to define a constitutive model taking into account both nanomechanical results, i.e. nanopillars, nanoindentation, diamond anvil cell, and molecular dynamics simulation
The DACAPO-PESO campaign: Dynamics, Aerosol, Cloud and Precipitation Observations in the Pristine Environment of the Southern Ocean: An overview
This article gives an overview of the DACAPO-PESO field experiment,
which has taken place in Punta Arenas, Chile, from November 2018 to November 2021,
and showcases first exciting research results that have already emerged from it.In diesem Artikel wird ein Überblick über das DACAPO-PESO
Experiment gegeben, welches von November 2018 bis November 2021 in Punta Arenas,
Chile, stattgefunden hat. Außerdem werden erste spannende Forschungsergebnisse
vorgestellt, die bereits daraus gewonnen wurden
Elastic instability and contact angles on hydrophobic surfaces with periodic textures
Surface textures are used to impart advanced wetting properties to surfaces. However, understanding the surface response in relation to the nature of the texture is still a challenge. Here we have measured advancing and receding contact angles on model hydrophobic surfaces with cylindrical pillars as a function of the pillar spacing. We show that the dependences of both advancing and receding contact angles upon spacing are well accounted for by a simple model of the instability of the triple line, following the line elasticity theory by Joanny and de Gennes (J. Chem. Phys., 81 (1984) 552). This result demonstrates the prominent role of the triple-line elasticity in determining the wetting properties of textured surfaces
- …