A gauge invariant chiral unitary framework for kaon photo- and electroproduction on the proton

We present a gauge invariant approach to photoproduction of mesons on nucleons within a chiral unitary framework. The interaction kernel for meson-baryon scattering is derived from the chiral effective Lagrangian and iterated in a Bethe-Salpeter equation. Within the leading order approximation to the interaction kernel, data on kaon photoproduction from SAPHIR, CLAS and CBELSA/TAPS are analyzed in the threshold region. The importance of gauge invariance and the precision of various approximations in the interaction kernel utilized in earlier works are discussed.Comment: 23 pages, 13 figs, EPJ A styl

Conceptualizing and Interpreting Mean and Median With Future Teachers

Mathematical Education of Teachers II (METII), echoed by the American Statistical Association publication, Statistical Education of Teachers, recommended teacher preparation programs support future teachers in developing deep understandings of mean and median, such that middle grades teachers may use them to “summarize, describe, and compare distributions” (Conference Board of Mathematical Sciences, 2012, p. 44; Franklin et al., 2015). Georgia Standards of Excellence require statistical reasoning from students beginning as early as 6-7 years old, including interpretation of measures of center and statistical reasoning about best measures of center (Georgia Department of Education, 2015). This level of understanding and interpretation of measures of center, however, has been a persistent struggle for students and their teachers (e.g., Jacobbe & Carvalho, 2011). Jacobbe and Carvalho argued that an over-reliance on computation with little focus on conceptual understanding has created these barriers to statistical reasoning. To impact students’ understanding, a starting point is to address teachers’ understanding, particularly by supporting conceptual understanding of measures of center in teacher preparation programs (Jacobbe & Carvalho, p. 207). Our research question was: What conceptual understandings of mean and median do preservice teacher candidates (PSTs) exhibit when presented with a mean and median statistical task? We present findings from a two-part study, comparing PSTs’ responses to a task written to elicit conceptual understandings and statistical reasoning in one semester, with PSTs’ responses to a revised task in a second semester, both given at the end of a senior-level Statistics for K-8 Teachers course

K-8 Preservice Teachers’ Statistical Thinking When Determining Best Measure of Center

The purpose of this study was to determine K-8 preservice teacher (PST) candidates’ statistical thinking when selecting the best center representation for the given data. Forty-four PSTs enrolled in a Statistics and Probability for K-8 Teachers course in a university located in the southeastern region of the United States were asked to complete a 2007 National Assessment of Educational Progress test item. All 44 PSTs’ data were qualitatively analyzed for correctness and statistical thinking strategies used. Findings were that most PSTs either incorrectly selected the mean, rather than median, as the best measure of center for the given data or did not use appropriate statistical reasoning when explaining their answers. Future research includes modifying the explanation component so PSTs must better explain their statistical thinking for their choice of best measure of center using the context of the problem. Future research could also include implementing a pre- and post-test design with the post-test item embedded in the final exam. This design will provide additional understanding of how much knowledge PSTs bring to the course versus how much they learn in the course and provide incentive for giving thoughtful consideration for their answers

Precautionary labelling of foods for allergen content: are we ready for a global framework?

© 2014 Allen et al.; licensee BioMed Central Ltd.Food allergy appears to be on the rise with the current mainstay of treatment centred on allergen avoidance. Mandatory allergen labelling has improved the safety of food for allergic consumers. However an additional form of voluntary labelling (termed precautionary allergen labelling) has evolved on a wide range of packaged goods, in a bid by manufacturers to minimise risk to customers, and the negative impact on business that might result from exposure to trace amounts of food allergen present during cross-contamination during production. This has resulted in near ubiquitous utilisation of a multitude of different precautionary allergen labels with subsequent confusion amongst many consumers as to their significance. The global nature of food production and manufacturing makes harmonisation of allergen labelling regulations across the world a matter of increasing importance. Addressing inconsistencies across countries with regards to labelling legislation, as well as improvement or even banning of precautionary allergy labelling are both likely to be significant steps forward in improved food safety for allergic families. This article outlines the current status of allergen labelling legislation around the world and reviews the value of current existing precautionary allergen labelling for the allergic consumer. We strongly urge for an international framework to be considered to help roadmap a solution to the weaknesses of the current systems, and discuss the role of legislation in facilitating this

A review of the evolution of robotic-assisted total hip arthroplasty.

INTRODUCTION: Total hip arthroplasty (THA) is currently a very successful operation but continues to evolve as we try to perfect techniques and improve outcomes for our patients. Robotic hip surgery (RHS) began with the 'active' ROBODOC system in the 1980s. There were drawbacks associated with the original ROBODOC and most recently, the MAKO robot was introduced with early promising results. AIM: The aim of this paper is to provide an up-to-date review surrounding this area and discuss the pros and cons of this technique. METHODS: A literature review searching Medline, Embase, Ovidsp, Cochrane library, pubmed database and google scholar was performed searching keywords including: 'Robotic hip surgery', 'Robotic orthopaedic surgery', 'Computer assisted hip surgery', 'robotic arthroplasty', and 'computer assisted orthopaedic surgery'. CONCLUSION: Robotic hip surgery aims to tackle the limitations of the human factor in surgery by promising reproducible and reliable methods of component positioning in arthroplasty surgery. However, as orthopaedic surgeons, we must critically appraise all new technology and support the use providing there is sound robust evidence backing it

Harvesting electrical energy using plasmon-enhanced light pressure in a platinum cut cone

We have designed a method of harvesting electrical energy using plasmon-enhanced light pressure. A device was fabricated as a cut cone structure that optimizes light collection so that the weak incident light pressure can be sufficiently enhanced inside the cut cone to generate electrical energy. An increase in the device's current output is a strong indication that the pressure of incident light has been enhanced by the surface plasmons on a platinum layer inside the cut cone. The electrical energy harvested in a few minutes by irradiating pulsed laser light on a single micro device was possible to illuminate a blue LED

The application of 29Si NMR spectroscopy to the analysis of calcium silicate-based cement using Biodentine™ as an example

Biodentine is one of the most successful and widely studied among the second generation of calcium silicate-based endodontic cements. Despite its popularity, the setting reactions of this cement system are not currently well understood. In particular, very little is known about the formation and structure of the major calcium silicate hydrate (C-S-H) gel phase as it is difficult to obtain information on this poorly crystalline material by the traditional techniques of powder X-ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FTIR). In this study, the hydration reactions of Biodentine™ are monitored by XRD, FTIR, isothermal conduction calorimetry, and for the first time, 29Si magic angle spinning nuclear magnetic resonance spectroscopy (29Si MAS NMR) is used to investigate the structures of the anhydrous calcium silicate phases and the early C-S-H gel product. XRD analysis indicated that the anhydrous powder comprises 73.8 wt% triclinic tricalcium silicate, 4.45 wt% monoclinic β-dicalcium silicate, 16.6 wt% calcite and 5.15 wt% zirconium oxide. Calorimetry confirmed that the induction period for hydration is short and that the setting reactions are rapid with a maximum heat evolution of 28.4 mW g−1 at 42 min. A progressive shift in the FTIR peak maximum from 905 to 995 cm-1 for the O-Si-O stretching vibrations accompanies the formation of the C-S-H gel during 1 week. The extent of hydration was determined by 29Si MAS NMR to be 87.0, 88.8 and 93.7% at 6 h, 1 day and 1 week, respectively, which is significantly higher than that of MTA. The mean silicate chain length (MCL) of the C-S-H gel was also estimated by this technique to be 3.7 at 6 h and 1 day, and to have increased to 4.1 after 1 week. The rapid hydration kinetics of Biodentine, arising from the predominance of the tricalcium silicate phase, small particle size, and ‘filler effect’ of calcite and zirconium oxide, is a favourable characteristic of an endodontic cement, and the high values of MCL are thought to promote the durability of the cement matrix

Piezoelectric energy harvesting using solar radiation pressure enhanced by surface plasmons at visible to near-infrared wavelengths

A light-pressure electric generator (LPEG) device, which harvests piezoelectric energy using solar radiation enhanced by surface plasmons (SPs), is demonstrated. The design of the device is motivated by the need to drastically increase the power output of existing piezoelectric devices based on SP resonance. The solar radiation pressure can be used as an energy source by employing an indium tin oxide (ITO)/Ag double layer to excite the SPs in the near-infrared (NIR) and visible light regions. The LPEG with the ITO layer generates an open-circuit voltage of 295 mV, a short-circuit current of 3.78 μA, and a power of 532.3 μW cm−2 under a solar simulator. The power of the LPEG device incorporating the ITO layer increased by 38% compared to the device without the ITO layer. The effect of the ITO layer on the electrical output of the LPEG was analyzed in detail by measuring the electrical output when visible and NIR lights are incident on the device using optical bandpass filters. In addition, finite-difference time-domain simulation confirmed that the pressure of the incident light can be further amplified by the ITO/Ag double layer. Finally, the energy harvested from the LPEG was stored in capacitors to successfully illuminate red light-emitting diodes

BACE1: More than just a β‐secretase

β-site amyloid precursor protein cleaving enzyme-1 (BACE1) research has historically focused on its actions as the β-secretase responsible for the production of β-amyloid beta, observed in Alzheimer's disease. Although the greatest expression of BACE1 is found in the brain, BACE1 mRNA and protein is also found in many cell types including pancreatic β-cells, adipocytes, hepatocytes, and vascular cells. Pathologically elevated BACE1 expression in these cells has been implicated in the development of metabolic diseases, including type 2 diabetes, obesity, and cardiovascular disease. In this review, we examine key questions surrounding the BACE1 literature, including how is BACE1 regulated and how dysregulation may occur in disease, and understand how BACE1 regulates metabolism via cleavage of a myriad of substrates. The phenotype of the BACE1 knockout mice models, including reduced weight gain, increased energy expenditure, and enhanced leptin signaling, proposes a physiological role of BACE1 in regulating energy metabolism and homeostasis. Taken together with the weight loss observed with BACE1 inhibitors in clinical trials, these data highlight a novel role for BACE1 in regulation of metabolic physiology. Finally, this review aims to examine the possibility that BACE1 inhibitors could provide a innovative treatment for obesity and its comorbidities

Modulation of Rab7a-mediated growth factor receptor trafficking inhibits islet beta cell apoptosis and autophagy under conditions of metabolic stress

Regenerative medicine approaches to enhancing beta cell growth and survival represent potential treatments for diabetes. It is known that growth factors such as insulin, IGF-1 and HGF support beta cell growth and survival, but in people with type 2 diabetes the destructive effects of metabolic stress predominate and beta cell death or dysfunction occurs. In this study we explore the novel hypothesis that regulation of growth factor receptor trafficking can be used to promote islet beta cell survival. Growth factor signalling is dependent on the presence of cell surface receptors. Endosomal trafficking and subsequent recycling or degradation of these receptors is controlled by the Rab GTPase family of proteins. We show that Rab7a siRNA inhibition enhances IGF-1 and HGF signalling in beta cells and increases expression of the growth factor receptors IGF-1R and c-Met. Furthermore, Rab7a inhibition promotes beta cell growth and islet survival, and protects against activation of apoptosis and autophagy pathways under conditions of metabolic stress. This study therefore demonstrates that Rab7a-mediated trafficking of growth factor receptors controls beta cell survival. Pharmaceutical Rab7a inhibition may provide a means to promote beta cell survival in the context of metabolic stress and prevent the onset of type 2 diabetes