Alkali and acid polysaccharides blend nanofibrous membranes prepared by electrospinning

Poster apresentado no "Smart and functional coatings conference", Torino, Italy, 2013Electrospinning allows the production of polymer fibres with diameters in the sub-micron size range, through the application of an external electric field, keeping intact the bulk properties of the polymers. Electrospun membranes possess some unique structural features, such as a high surface to volume ratio and very good mechanical performance, properties that are determinant to their use in several applications such as air and liquid filtration, tissue engineering, optical and chemical sensors [1]. In this work, alkali and acid biopolysaccharides blended with polyvinyl alcohol (PVA) were electrospinned into a polyvinylidene difluoride (PVDF) basal microfiltration membrane, with the goal of developing a mid-layer nanofibrous porous support for exploitable thin-film composite (TFC) membranes for water filtration. The alkali and acid biopolysaccharides chosen were, respectively, chitosan (CS), a cationic polyelectrolyte (in this case with deacetylation degree around 85), and cyanobacterial extracellular polymeric substances (EPS), an acidic polysaccharide isolated from Cyanothece sp.CCY 0110 [2]. The electrospun blended nanofibrous membranes were fully characterized in order to investigate their morphology, diameter, structure, mechanical and thermal properties. The results showed that these membranes have great potential for filtration purposes [3].This work was funded by FEDER funds through the Operational Competitiveness Programme – COMPETE and by National Funds through FCT – Fundação para a Ciência e a Tecnologia under the projects FCOMP-01-0124-FEDER-022718 (PEst-C/SAU/LA0002/2011), FCOMP-01-0124-FEDER-009389 (PTDC/CTM/100627/2008) and FCOMP-01-0124-FEDER-009697 (PTDC/EBB-EBI/099662/2008), and the grants SFRH/BPD/37045/2007 and SFRH/BPD/72400/2010. The authors also thank to the project INVISIBLE NETWORK nº. 13857 * SI I&DT Mobilizador

Thin-layer nanofiltration membranes using engineered biopolymers for seawater desalination pre-treatment processes

Nowadays water demand already exceeds supply and water scarcity is a global problem. So it is necessary to develop novel technologies to be able to use poorer quality source waters for drinking water production. Once considered as an expensive, ultimate solution for water supply, desalination is becoming affordable. The two most commonly used seawater desalination methods are Multi-stage Flash Distillation (MSF) and Seawater Reverse Osmosis (SWRO). SWRO is less energy demanding compared to MSF, which makes it economically attractive. However there is no backpulsing of the expensive and delicate reverse osmosis (RO) membranes with air or water, so they are susceptible to fouling, causing the loss of their performance. Therefore cleaning the feed water to the highest level possible by nanofiltration, before it reaches the RO membranes would highly increase the efficiency of the process. Nanofiltration (NF) as a feed pre-treatment step is a pressure driven membrane separation process that takes place on a selective layer formed by a semipermeable membrane with properties between RO and ultrafiltration. The objective of this project is the developement of highly efficient thin-film composite (TFC) membranes for SWRO pre-treatment processes based on low-fouling cyanobacterial extracellular polymeric substances (EPS). TFC membranes combine high flux and mechanical strenght, and they are expected to be the key components of any water purification technology in the future. Cyanobacterial EPS are complex heteropolysaccharides with putative antimicrobial and antiviral properties and a particular affinity to bind metal ions [1,2].Within this work, the unicellular N2-fixing marine cyanobacterium Cyanothece sp. CCY 0110 was chosen for RPS production, since it is among the most efficient released polysaccharide (RPS) producers and the polymer has been previously extensively characterised [3]. RPS was produced by growing Cyanothece CCY 0110 in 10L bioreactors, in conditions previously defined and the polymer was isolated following the standard methodology [3]. A polyvinyl alcohol (PVA) / cyanobacterial EPS blend nanofibrous membranes were fabricated by electrospinning using polyvinylidene fluoride (PVDF) as a basal membrane, in order to obtain thin-layer composite nanofiltration membranes. The production of the nanofibers using EPS and PVA as plasticizer in different ratios was produced in a NF-103 MECC Nanon electrospinning equipment with an applied electric field between 15 and 25 kV and a flow of 0,2 mL/h. Morphological, mechanical, chemical and thermal characterization of the electrospun fibers deposited on the basal membranes, were evaluated by atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), dynamical and mechanical analysis (DMA), thermogravimetry (TGA) and differential scanning calorimetry (DSC). The AFM and SEM results show the presence of fibers with dimensions between 54 and 121 nm with low bead formation. In the EDS analysis presence of sulfur elements was observed confirming the inclusion of EPS in the nanofibers. The morphology and diameter of the nanofibers were mainly affected by the concentration of the blend solution and the weight ratio of the blend, respectively. The best PVA/EPS nanofibers were achieved in a ratio of 12 % PVA and 0.4 % EPS. The solution conductivity was ranging 1500 to 3500 μS/cm with a viscosity of about 100 to 500 cP. The DMA results confirmed the miscibility of PVA/EPS blends. The elastic modulus of the nanocomposite mats increased significantly as a consequence of the reinforcing effect of EPS. Thermal and mechanical analysis demonstrated that there were strong intermolecular hydrogen bonds between the molecules EPS-PVA in the blends. The heat-treated electrospun blended membranes showed better tensile mechanical properties when compared with PVA alone, and resisted more against disintegration. A lab-scale nanofiltration was performed in a bench stainless steel Sterlitech tangential flow stirred cell (200 mL) connected to an air pressure system that allow pressure driven filtration up to 10 BAR. Bactericidal activity and biofilm formation were tested using Escherichia coli and Sthaphylococcus aureus as pathogenic microorganisms

calibration of finite element models of concrete arch gravity dams using dynamical measures the case of ridracoli

Abstract Accurate and reliable predictions of the dynamic behaviour of dams is essential to ensure their correct management and the safety of the downstream population. In this context, structural monitoring and testing procedures for their dynamic characterization are essential tools for the calibration of numerical models of dams. This paper presents some results of an ongoing research program aimed at an accurate definition of the geometric and structural properties of a large arch-gravity dam: the Ridracoli dam in the Emilia-Romagna region, Italy. In the first part of the research, a detailed survey carried out by an Unmanned Aerial Vehicle has allowed the detailed reconstruction of the three-dimensional geometry of the structure. The dense point cloud, as provided by the aerial survey, has been the base for the definition of a high-fidelity finite element model, including the dam, the surrounding rock mass, with a detailed reconstruction of the site topography, and the reservoir water, whose dynamic interaction with the structure is modelled by means of acoustic elements. A large program of structural monitoring, including a number of vibration tests, has been performed on the Ridracoli dam during the last thirty years. The dynamic monitoring system includes accelerometers, located in the structure and in the foundation rock mass, strain gauges and hydrodynamic pressure cells. The forced vibration tests were carried out in correspondence to the maximum water level, in order to identify the dynamic characteristics of the dam. The mechanical properties of the dam material and of the foundation rock are calibrated by comparing model predictions with the results obtained from vibration tests and from acceleration recordings acquired under recent seismic events, considering the actual water levels registered during the tests. The finite element model obtained will allow the simulation of the seismic performance of the dam under different design earthquakes. The assessment of the effects of the reservoir level and of the vertical joints on the dynamic response of the structure will be analysed

Anyone with a Long-Face? Craniofacial Evolutionary Allometry (CREA) in a Family of Short-Faced Mammals, the Felidae

Among adults of closely related species, a trend in craniofacial evolutionary allometry (CREA) for larger taxa to be long-faced and smaller ones to have paedomorphic aspects, such as proportionally smaller snouts and larger braincases, has been demonstrated in some mammals and two bird lineages. Nevertheless, whether this may represent a ‘rule’ with few exceptions is still an open question. In this context, Felidae is a particularly interesting family to study because, although its members are short-faced, previous research did suggest relative facial elongation in larger living representatives. Using geometric morphometrics, based on two sets of anatomical landmarks, and traditional morphometrics, for comparing relative lengths of the palate and basicranium, we performed a series of standard and comparative allometric regressions in the Felidae and its two subfamilies. All analyses consistently supported the CREA pattern, with only one minor exception in the geometric morphometric analysis of Pantherinae: the genus Neofelis. With its unusually long canines, Neofelis species seem to have a relatively narrow cranium and long face, despite being smaller than other big cats. In spite of this, overall, our findings strengthen the possibility that the CREA pattern might indeed be a ‘rule’ among mammals, raising questions on the processes behind it and suggesting future directions for its study

Noninvasive biophotonic imaging for studies of infectious disease

According to World Health Organization estimates, infectious organisms are responsible for approximately one in four deaths worldwide. Animal models play an essential role in the development of vaccines and therapeutic agents but large numbers of animals are required to obtain quantitative microbiological data by tissue sampling. Biophotonic imaging (BPI) is a highly sensitive, nontoxic technique based on the detection of visible light, produced by luciferase-catalysed reactions (bioluminescence) or by excitation of fluorescent molecules, using sensitive photon detectors. The development of bioluminescent/fluorescent microorganisms therefore allows the real-time noninvasive detection of microorganisms within intact living animals. Multiple imaging of the same animal throughout an experiment allows disease progression to be followed with extreme accuracy, reducing the number of animals required to yield statistically meaningful data. In the study of infectious disease, the use of BPI is becoming widespread due to the novel insights it can provide into established models, as well as the impact of the technique on two of the guiding principles of using animals in research, namely reduction and refinement. Here, we review the technology of BPI, from the instrumentation through to the generation of a photonic signal, and illustrate how the technique is shedding light on infection dynamics in vivo

VIII Encuentro de Docentes e Investigadores en Historia del Diseño, la Arquitectura y la Ciudad

Acta de congresoLa conmemoración de los cien años de la Reforma Universitaria de 1918 se presentó como una ocasión propicia para debatir el rol de la historia, la teoría y la crítica en la formación y en la práctica profesional de diseñadores, arquitectos y urbanistas. En ese marco el VIII Encuentro de Docentes e Investigadores en Historia del Diseño, la Arquitectura y la Ciudad constituyó un espacio de intercambio y reflexión cuya realización ha sido posible gracias a la colaboración entre Facultades de Arquitectura, Urbanismo y Diseño de la Universidad Nacional y la Facultad de Arquitectura de la Universidad Católica de Córdoba, contando además con la activa participación de mayoría de las Facultades, Centros e Institutos de Historia de la Arquitectura del país y la región. Orientado en su convocatoria tanto a docentes como a estudiantes de Arquitectura y Diseño Industrial de todos los niveles de la FAUD-UNC promovió el debate de ideas a partir de experiencias concretas en instancias tales como mesas temáticas de carácter interdisciplinario, que adoptaron la modalidad de presentación de ponencias, entre otras actividades. En el ámbito de VIII Encuentro, desarrollado en la sede Ciudad Universitaria de Córdoba, se desplegaron numerosas posiciones sobre la enseñanza, la investigación y la formación en historia, teoría y crítica del diseño, la arquitectura y la ciudad; sumándose el aporte realizado a través de sus respectivas conferencias de Ana Clarisa Agüero, Bibiana Cicutti, Fernando Aliata y Alberto Petrina. El conjunto de ponencias que se publican en este Repositorio de la UNC son el resultado de dos intensas jornadas de exposiciones, cuyos contenidos han posibilitado actualizar viejos dilemas y promover nuevos debates. El evento recibió el apoyo de las autoridades de la FAUD-UNC, en especial de la Secretaría de Investigación y de la Biblioteca de nuestra casa, como así también de la Facultad de Arquitectura de la UCC; va para todos ellos un especial agradecimiento

25th annual computational neuroscience meeting: CNS-2016

The same neuron may play different functional roles in the neural circuits to which it belongs. For example, neurons in the Tritonia pedal ganglia may participate in variable phases of the swim motor rhythms [1]. While such neuronal functional variability is likely to play a major role the delivery of the functionality of neural systems, it is difficult to study it in most nervous systems. We work on the pyloric rhythm network of the crustacean stomatogastric ganglion (STG) [2]. Typically network models of the STG treat neurons of the same functional type as a single model neuron (e.g. PD neurons), assuming the same conductance parameters for these neurons and implying their synchronous firing [3, 4]. However, simultaneous recording of PD neurons shows differences between the timings of spikes of these neurons. This may indicate functional variability of these neurons. Here we modelled separately the two PD neurons of the STG in a multi-neuron model of the pyloric network. Our neuron models comply with known correlations between conductance parameters of ionic currents. Our results reproduce the experimental finding of increasing spike time distance between spikes originating from the two model PD neurons during their synchronised burst phase. The PD neuron with the larger calcium conductance generates its spikes before the other PD neuron. Larger potassium conductance values in the follower neuron imply longer delays between spikes, see Fig. 17.Neuromodulators change the conductance parameters of neurons and maintain the ratios of these parameters [5]. Our results show that such changes may shift the individual contribution of two PD neurons to the PD-phase of the pyloric rhythm altering their functionality within this rhythm. Our work paves the way towards an accessible experimental and computational framework for the analysis of the mechanisms and impact of functional variability of neurons within the neural circuits to which they belong