Comparative performance of squeeze film air journal bearings made of aluminium and copper

This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. Copyright @ 2012 The Authors - The article can be accessed from the links below.This article has been made available through the Brunel Open Access Publishing Fund.Two tubular squeeze film journal bearings, made from Al 2024 T3 and Cu C101, were excited by driving the single-layer piezoelectric actuators at a 75-V AC with a 75-V DC offset. The input excitation frequencies were coincident with the 13th modal frequency, at 16.32 and 12.18 kHz for the respective Al and Cu bearings, in order to produce a ‘triangular’ modal shape. The paper also provided a CFX model, used to solve the Reynolds equation and the equation of motion, to explain the squeeze film effect of an oscillating plate with pressure end leakage. The dynamic characteristics of both bearings were studied in ANSYS and then validated by experiments with respect to their squeeze film thickness and load-carrying capacity. It was observed that whilst both bearings did levitate a load when excited at mode 13, the Al bearing showed a better floating performance than Cu bearing. This is due to the fact that the Al bearing had a higher modal frequency and a greater amplitude response than the Cu bearing.This article is made available through the Brunel Open Access Publishing Fund

Rights and Fairness: A Cross-Cultural Analysis of the Representation of Gender Relations in Marriages in Vietnamese and British Online Comments

Many researches have been conducted with the motivation of discovering a precise definition of gender equality (Beveridge & Velluti 2008; Verloo 2007). However, this conception depends on many factors relating to specific features of each society, and it also changes over time. After thousands of year of patriarchy, starting from the 19th Century, with the emergence of feminist theory in Europe, debates endure over women’s right and equality in every essential aspect of society. Even though women’s position in society and family has improved, the long period of patriarchal ideology still has its influence, especially in developing countries where the feminist movements were formed later than in Europe. Women in developing countries are still fighting for their rights while many women in developed countries have gained decisive achievements. In addition to that, each culture possesses its own perspective on specific phenomena, and these perspectives differ when we consider complicated issues, such as gender. This study therefore seeks to examine how people in different cultures perceive their gender roles and how their percipience influences their action by analyzing online comments under articles about household chore division in two tabloids. The first tabloid is from Vietnam (www.afamily.vn), a typical developing country; the second one is from Great Britain (www.dailymail.co.uk), one of the leaders of feminist movements. By combining qualitative content analysis by Mayring (2000), the analysis of cultural models as developed by Paul Gee (2008), with a stylistic analysis by Arp & Johnson (2009), and comparative research methods by Brislin (1976) the research not only demonstrates how gender and gender relation are constructed in different cultural contexts but also discloses different conceptions of gender roles in both the Vietnamese and British comments. Apparently, ultimate masculine power in the past still impacts on the conception of gender roles in both Vietnamese and British case and makes men resist sharing domestic chore with women. However, the needs of women are not really a fair share but actually being respected and appreciated by their partner for what they have done.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Structural panels

Vinyl pyridines including vinyl stilbazole materials and vinyl styrylpyridine oligomer materials are disclosed. These vinylpyridines form copolymers with bismaleimides which copolymers have good fire retardancy and decreased brittleness. The cure temperatures of the copolymers are substantially below the cure temperatures of the bismaleimides alone. Reinforced composites made from the cured copolymers are disclosed as well

Vinyl stilbazoles

Vinyl pyridines including vinyl stilbazole materials and vinyl styrylpyridine oligomer materials are disclosed. These vinylpyridines form copolymers with bismaleimides which copolymers have good fire retardancy and decreased brittleness. The cure temperatures of the copolymers are substantially below the cure temperatures of the bismaleimides alone. Reinforced composites made from the cured copolymers are disclosed as well

A paediatric telecardiology service for district hospitals in south-east England: an observational study.

The attached article is a Publisher version of the final published version which may be accessed at the link below. Copyright © 2010 BMJ Publishing Group Ltd & Royal College of Paediatrics and Child Health. All rights reservedOBJECTIVES: To compare caseloads of new patients assessed by paediatric cardiologists face-to-face or during teleconferences, and assess NHS costs for the alternative referral arrangements. DESIGN: Prospective cohort study over 15 months. SETTING: Four district hospitals in south-east England and a London paediatric cardiology centre. PATIENTS: Babies and children. INTERVENTION: A telecardiology service introduced alongside outreach clinics. MEASUREMENTS: Clinical outcomes and mean NHS costs per patient. RESULTS: 266 new patients were studied: 75 had teleconsultations (19 of 42 newborns and 56 of 224 infants and children). Teleconsultation patients generally were younger (49% being under 1 year compared with 32% seen personally (p = 0.025)) and their symptoms were not as severe. A cardiac intervention was undertaken immediately or planned for five telemedicine patients (7%) and 30 conventional patients (16%). However, similar proportions of patients were discharged after being assessed (32% telemedicine and 39% conventional). During scheduled teleconferences the mean duration of time per patient in sessions involving real-time echocardiography was 14.4 min, and 8.5 min in sessions where pre-recorded videos were transmitted. Mean cost comparisons for telemedicine and face-to-face patients over 14-day and 6-month follow-up showed the telecardiology service to be cost-neutral for the three hospitals with infrequently-held outreach clinics (1519 UK pounds vs 1724 UK pounds respectively after 14 days). CONCLUSION: Paediatric cardiology centres with small cadres of specialists are under pressure to cope with ever-expanding caseloads of new patients with suspected anomalies. Innovative use of telecardiology alongside conventional outreach services should suitably, and economically, enhance access to these specialists.The Department of Health and the Charitable Funds Committee of the Royal Brompton and Harefield NHS Trust funded the project

The Effect of wake Turbulence Intensity on Transition in a Compressor Cascade

Direct numerical simulations of separating flow along a section at midspan of a low-pressure V103 compressor cascade with periodically incoming wakes were performed. By varying the strength of the wake, its influence on both boundary layer separation and bypass transition were examined. Due to the presence of small-scale three-dimensional fluctuations in the wakes, the flow along the pressure surface undergoes bypass transition. Only in the weak-wake case, the boundary layer reaches a nearly-separated state between impinging wakes. In all simulations, the flow along the suction surface was found to separate. In the simulation with the strong wakes, separation is intermittently suppressed as the periodically passing wakes managed to trigger turbulent spots upstream of the location of separation. As these turbulent spots convect downstream, they locally suppress separation. © 2014 Springer Science+Business Media Dordrecht

Refinement Type Inference via Horn Constraint Optimization

We propose a novel method for inferring refinement types of higher-order functional programs. The main advantage of the proposed method is that it can infer maximally preferred (i.e., Pareto optimal) refinement types with respect to a user-specified preference order. The flexible optimization of refinement types enabled by the proposed method paves the way for interesting applications, such as inferring most-general characterization of inputs for which a given program satisfies (or violates) a given safety (or termination) property. Our method reduces such a type optimization problem to a Horn constraint optimization problem by using a new refinement type system that can flexibly reason about non-determinism in programs. Our method then solves the constraint optimization problem by repeatedly improving a current solution until convergence via template-based invariant generation. We have implemented a prototype inference system based on our method, and obtained promising results in preliminary experiments.Comment: 19 page

Fermion masses in the economical 3-3-1 model

We show that, in frameworks of the economical 3-3-1 model, all fermions get masses. At the tree level, one up-quark and two down-quarks are massless, but the one-loop corrections give all quarks the consistent masses. This conclusion is in contradiction to the previous analysis in which, the third scalar triplet has been introduced. This result is based on the key properties of the model: First, there are three quite different scales of vacuum expectation values: \om \sim {\cal O}(1) \mathrm{TeV}, v \approx 246 \mathrm{GeV} and $u \sim {\cal O}(1) \mathrm{GeV}$. Second, there exist two types of Yukawa couplings with different strengths: the lepton-number conserving couplings $h$'s and the lepton-number violating ones $s$'s satisfying the condition in which the second are much smaller than the first ones: $s \ll h$. With the acceptable set of parameters, numerical evaluation shows that in this model, masses of the exotic quarks also have different scales, namely, the $U$ exotic quark ($q_U = 2/3$) gains mass $m_U \approx 700$ GeV, while the D_\al exotic quarks (q_{D_\al} = -1/3) have masses in the TeV scale: m_{D_\al} \in 10 \div 80 TeV.Comment: 20 pages, 8 figure

Probability Density Functions to Represent Magnetic Fields at the Solar Surface

Numerical simulations of magneto-convection and analysis of solar magnetogram data provide empirical probability density functions (PDFs) for the line-of-sight component of the magnetic field. In this paper, we theoretically explore effects of several types of PDFs on polarized Zeeman line formation. We also propose composite PDFs to account for randomness in both field strength and orientation. Such PDFs can possibly mimic random fields at the solar surface.Comment: To appear in "Magnetic Coupling between the Interior and the Atmosphere of the Sun", eds. S.S. Hasan and R.J. Rutten, Astrophysics and Space Science Proceedings, Springer-Verlag, Heidelberg, Berlin, 200