5G Uniform linear arrays with beamforming and spatial multiplexing at 28 GHz, 37 GHz, 64 GHz and 71 GHz for outdoor urban communication: A two-level approach

Multiple-input multiple-output (MIMO) spatial multiplexing and beamforming are regarded as key technology enablers for the fifth-generation (5G) millimeter wave (mmWave) mobile radio services. Spatial multiplexing requires sufficiently separated and incoherent antenna array elements, while in the case of beamforming, the antenna array elements need to be coherent and closely spaced. Extensive 28-, 60-, and 73-GHz ultra-wideband propagation measurements in cities of New York City and Austin have indicated formation of two or more spatial lobes for the angles-of-departure and angles-of-arrival even for line-of-sight (LOS) transmission, which is an advantageous feature of mmWave channels, indicating that the transmitting and receiving array antenna elements can be co-located, thus enabling a single architecture for both spatial multiplexing and beamforming. In this paper, a two-level beamforming architecture for uniform linear arrays is proposed that leverages the formation of these spatial lobes. The antenna array is composed of sub-arrays, and the impact of sub-array spacing on the spectral efficiency is investigated through simulations using a channel simulator named NYUSIM developed based on extensive measured data at mmWave frequencies. Simulation results indicate spectral efficiencies of 18.5–28.1 bits/s/Hz with a sub-array spacing of 16 wavelengths for an outdoor mmWave urban LOS channel. The spectral efficiencies obtained are for single-user (SU) MIMO transmission at the recently allocated 5G carrier frequencies in July 2016. The method and results in this paper are useful for designing antenna array architectures for 5G wireless systems

A base station antenna element with simple structure but excellent performance

© 2018 IEEE. A ±45° dual-polarized concentrically arranged dipole antenna is proposed for base station applications. The simple, robust antenna consists of four simple dipoles arranged in a square above a flat reflector. Two specially designed feeding networks for the two polarizations are proposed to simultaneously excite the four dipoles. Without shaping the reflector, the combination of four dipoles provides a stable radiation pattern across a wide bandwidth. Measured results show that the proposed antenna has an input reflection coefficient ≤ -14 dB from 1.71 to 2.71 GHz for both polarizations. Across this wide bandwidth (45.2%), the half-power-beamwidths (HPBWs) of the two polarizations remain very stable in the range from 60.5° to 69.5°. High port-to-port isolation ≥ 30 dB and low cross-polarization level ≤ -20 dB are achieved over the entire operating band

The effect of gas phase flame retardants on fire effluent toxicity

Standard industry formulations of flame retarded aliphatic polyamides, meeting UL 94 V-0, have been burned under controlled conditions, and the yields of the major asphyxiants, carbon monoxide (CO) and hydrogen cyanide (HCN) have been quantified. Although both the combination of aluminium phosphinate and melamine polyphosphate, and the combination of brominated polystyrene and antimony oxide, inhibit combustion reactions in the gas phase, this study shows that the phosphorus causes a much smaller increase in the CO and HCN yields than antimony-bromine. The mechanisms of CO and HCN generation and destruction are related to the flame inhibition reactions. Both CO and HCN form early in the flame, and the OH radical is critical for their destruction. Crucial, in the context of the flame inhibition mechanism, is the observation that the phosphorus system reduces the H and O radical concentrations without a corresponding decrease in the OH radical concentration; conversely, the bromine system reduces all three of the key radical concentrations, H, O and OH, and thus increases the fire toxicity, by inhibiting decomposition of CO and HCN. Moreover, while the phosphorus flame retardant is effective as an ignition suppressant at lower temperatures (corresponding to early flaming), this is effect “switches off” at high temperatures, minimising the potential increase in fire toxicity, once the fire develops. Since flame retardants are most effective as ignition suppressants, and at the early stages of flaming combustion, while most fire deaths and injuries result from toxic gas inhalation from more developed fires, it is clearly advantageous to have an effective gas phase flame retardant which only causes a small increase in the toxic product yield

FasL expression on human nucleus pulposus cells contributes to the immune privilege of intervertebral disc by interacting with immunocytes

The mechanisms of immune privilege in human nucleus pulposus (NP) remain unclear. Accumulating evidence indicates that Fas ligand (FasL) might play an important role in the immune privilege of the disc. We aimed for addressing the role of FasL expression in human intervertebral disc degeneration (IDD) and immune privilege in terms of the interaction between NP cells and immunocytes via the FasL-Fas machinery. We collected NP specimens from 20 patients with IDD as degenerative group and 8 normal cadaveric donors as control. FasL expression was detected by qRT-PCR, western blotting and flow cytometry (FCM). We also collected macrophages and CD8(+) T cells from the peripheral blood of patients with IDD for co-cultures with NP cells. And macrophages and CD8(+) T cells were harvested for apoptosis analysis by FCM after 2 days of co-cultures. We found that FasL expression in mRNA, protein and cellular resolutions demonstrated a significant decrease in degenerative group compared with normal control (p<0.05). FCM analysis found that human NP cells with increased FasL expression resulted in significantly increased apoptosis ratio of macrophages and CD8(+) T cells. Our study demonstrated that FasL expression tends to decrease in degenerated discs and FasL plays an important role in human disc immune privilege, which might provide a novel target for the treatment strategies for IDD.published_or_final_versio

Do MRI findings identify patients with chronic low back pain and Modic changes who respond best to rest or exercise: A subgroup analysis of a randomised controlled trial

Background: No previous clinical trials have investigated MRI findings as effect modifiers for conservative treatment of low back pain. This hypothesis-setting study investigated if MRI findings modified response to rest compared with exercise in patients with chronic low back pain and Modic changes. Methods: This study is a secondary analysis of a randomised controlled trial comparing rest with exercise. Patients were recruited from a specialised outpatient spine clinic and included in a clinical trial if they had chronic low back pain and an MRI showing Modic changes. All patients received conservative treatment while participating in the trial. Five baseline MRI findings were investigated as effect modifiers: Modic changes Type 1 (any size), large Modic changes (any type), large Modic changes Type 1, severe disc degeneration and large disc herniation. The outcome measure was change in low back pain intensity measured on a 0-10 point numerical rating scale at 14-month follow-up (n = 96). An interaction = 1.0 point (0-10 scale) between treatment group and MRI findings in linear regression was considered clinically important. Results: The interactions for Modic Type 1, with large Modic changes or with large Modic changes Type 1 were all potentially important in size (-0.99 (95% CI -3.28 to 1.29), -1.49 (-3.73 to 0.75), -1.49 (-3.57 to 0.58), respectively) but the direction of the effect was the opposite to what we had hypothesized-that people with these findings would benefit more from rest than from exercise. The interactions for severe disc degeneration (0.74 (-1.40 to 2.88)) and large disc herniation (-0.92 (3.15 to 1.31)) were less than the 1.0-point threshold for clinical importance. As expected, because of the lack of statistical power, no interaction term for any of the MRI findings was statistically significant. Conclusions: Three of the five MRI predictors showed potentially important effect modification, although the direction of the effect was surprising and confidence intervals were wide so very cautious interpretation is required. Further studies with adequate power are warranted to study these and additional MRI findings as potential effect modifiers for common interventions

Geometry and kinematics for a spherical-base integrated parallel mechanism

Parallel mechanisms, in general, have a rigid base and a moving platform connected by several limbs. For achieving higher mobility and dexterity, more degrees of freedom are introduced to the limbs. However, very few researchers focus on changing the design of the rigid base and making it foldable and reconfigurable to improve the performance of the mechanism. Inspired by manipulating an object with a metamorphic robotic hand, this paper presents for the first time a parallel mechanism with a reconfigurable base. This novel spherical-base integrated parallel mechanism has an enlarged workspace compared with traditional parallel manipulators. Evolution and structure of the proposed parallel mechanism is introduced and the geometric constraint of the mechanism is investigated based on mechanism decomposition. Further, kinematics of the proposed mechanism is reduced to the solution of a univariate polynomial of degree 8. Moreover, screw theory based Jacobian is presented followed by the velocity analysis of the mechanism

Identification of new transitions and mass assignments of levels in 143−153^{143-153}Pr

The previously reported levels assigned to 151,152,153Pr have recently been called into question regarding their mass assignment. The above questioned level assignments are clarified by measuring g-transitions tagged with A and Z in an in-beam experiment in addition to the measurements from 252Cf spontaneous fission (SF) and establish new spectroscopic information from $N=84$ to $N=94$ in the Pr isotopic chain. The isotopic chain 143-153Pr has been studied from the spontaneous fission of 252Cf by using Gammasphere and also from the measurement of the prompt g-rays in coincidence with isotopically-identified fission fragments using VAMOS++ and EXOGAM at GANIL. The latter were produced using 238U beams on a 9Be target at energies around the Coulomb barrier. The g-g-g-g data from 252Cf (SF) and those from the GANIL in-beam A- and Z-gated spectra were combined to unambiguously assign the various transitions and levels in 151,152,153Pr and other isotopes. New transitions and bands in 145,147,148,149,150Pr were identified by using g-g-g and g-g-g-g coincidences and A and Z gated g-g spectra. The transitions and levels previously assigned to 151,153Pr have been confirmed by the (A,Z) gated spectra. The transitions previously assigned to 152Pr are now assigned to 151Pr on the basis of the (A,Z) gated spectra. Two new bands with 20 new transitions in 152Pr and one new band with 7 new transitions in 153Pr are identified from the g-g-g-g coincidence spectra and the (A,Z) gated spectrum. In addition, new g-rays are also reported in 143-146Pr. New levels of 145,147-153Pr have been established, reliable mass assignments of the levels in 151,152,153Pr have been reported and new transitions have been identified in 143-146Pr showing the new avenues that are opened by combining the two experimental approaches.Comment: Accepted in Phys. Rev.

Soft eSkin:distributed touch sensing with harmonized energy and computing

Inspired by biology, significant advances have been made in the field of electronic skin (eSkin) or tactile skin. Many of these advances have come through mimicking the morphology of human skin and by distributing few touch sensors in an area. However, the complexity of human skin goes beyond mimicking few morphological features or using few sensors. For example, embedded computing (e.g. processing of tactile data at the point of contact) is centric to the human skin as some neuroscience studies show. Likewise, distributed cell or molecular energy is a key feature of human skin. The eSkin with such features, along with distributed and embedded sensors/electronics on soft substrates, is an interesting topic to explore. These features also make eSkin significantly different from conventional computing. For example, unlike conventional centralized computing enabled by miniaturized chips, the eSkin could be seen as a flexible and wearable large area computer with distributed sensors and harmonized energy. This paper discusses these advanced features in eSkin, particularly the distributed sensing harmoniously integrated with energy harvesters, storage devices and distributed computing to read and locally process the tactile sensory data. Rapid advances in neuromorphic hardware, flexible energy generation, energy-conscious electronics, flexible and printed electronics are also discussed. This article is part of the theme issue ‘Harmonizing energy-autonomous computing and intelligence’