5,400 research outputs found
Power quality issues of 3MW direct-driven PMSG wind turbine
This paper presents power quality issues of a grid connected wind generation system with a MW-class direct-driven permanent magnet synchronous generator (PMSG). A variable speed wind turbine model was simulated and developed with the simulation tool of PSCAD/EMTDC. The model includes a wind turbine with one mass-model drive train model, a PMSG model and a full-scale voltage source back to back PWM converter. The converter controller model is employed in the dq-synchronous rotating reference frame and applied to both generator and grid sides. To achieve maximum power point tracking, a tip speed ratio method is applied in machine side, whereas DC voltage control is applied in grid side to achieve constant DC voltage. Due to wind fluctuation and power oscillation as a result of wind shear and tower shadow effects (3p), there will be a fluctuation in the output power and voltage. The concerned power quality issues in this work are Harmonics, power fluctuation and flicker emission. The measurements will be carried out under different wind speed and circumstances
Modelling of reduced GB transmission system in PSCAD/EMTDC
Energy and environmental issues are two of the greatest challenges facing the world today. In response to energy needs and environmental concerns, renewable energy technologies are now considered the future technologies of choice. Renewable energy is produced from natural sources that are clean and free; however, it is widely accepted that renewable energy is not a solution without challenges. An example of this can be seen in the UK, where there is much interest amongst generation developers in the construction of new large scale onshore and offshore wind farms, especially in Scotland. The stability of electric power systems is also an important issue. It is important to have full knowledge of the system and to be able to predict the behaviour under different situations is an important objective. As a result, several industrial grade power system simulator tools have been developed in order to estimate the behaviour of the electric power system under certain conditions. This paper presents a reduced Great Britain (GB) system model for stability analysis using PSCAD/EMTDC. The reduced model is based upon a future GB transmission system model and, hence, contains different types and mix of generation, HVDC transmission lines and additional interconnection. The model is based on the reduced DIgSILENT PowerFactory model developed by National Grid
Recommended from our members
The evolution and arrest of a turbulent stratified oceanic bottom boundary layer over a slope: Upslope regime and pv dynamics
AbstractThe influence of a sloping bottom and stratification on the evolution of an oceanic bottom boundary layer (BBL) in the presence of a mean flow is explored. As a complement to an earlier study by Ruan et al. (https://doi.org/10.1175/JPO-D-18-0079.1) examining Ekman arrest in a downslope regime, this paper describes turbulence and BBL dynamics during Ekman arrest in the upslope regime. In the upslope regime, an enhanced stratification develops in response to the upslope Ekman transport and suppresses turbulence. Using a suite of large-eddy simulations, we show that the BBL evolution can be described in a self-similar framework based on a nondimensional number X/Xa. This nondimensional number is defined as the ratio between the lateral displacement of density surfaces across the slope X and a displacement Xa required for Ekman arrest; the latter can be predicted from external parameters. Additionally, the evolution of the depth-integrated potential vorticity is considered in both upslope and downslope regimes. The PV destruction rate in the downslope regime is found to be twice the production rate in the upslope regime, using the same definition for the bottom mixed layer thickness. It is shown that this asymmetry is associated with the depth scale over which turbulent stresses are active. These results are a step toward improving parameterizations of BBL properties and evolution over sloping topography in coarse-resolution ocean models.</jats:p
The evolution and arrest of a turbulent stratified oceanic bottom boundary layer over a slope: Downslope regime
AbstractThe dynamics of a stratified oceanic bottom boundary layer (BBL) over an insulating, sloping surface depend critically on the intersection of density surfaces with the bottom. For an imposed along-slope flow, the cross-slope Ekman transport advects density surfaces and generates a near-bottom geostrophic thermal wind shear that opposes the background flow. A limiting case occurs when a momentum balance is achieved between the Coriolis force and a restoring buoyancy force in response to the displacement of stratified fluid over the slope: this is known as Ekman arrest. However, the turbulent characteristics that accompany this adjustment have received less attention. We present two estimates to characterize the state of the BBL based on the mixed layer thickness: Ha and HL. The former characterizes the steady Ekman arrested state, and the latter characterizes a relaminarized state. The derivation of HL makes use of a newly defined slope Obukhov length Ls that characterizes the relative importance of shear production and cross-slope buoyancy advection. The value of Ha can be combined with the temporally evolving depth of the mixed layer H to form a nondimensional variable H/Ha that provides a similarity prediction of the BBL evolution across different turbulent regimes. The length scale Ls can also be used to obtain an expression for the wall stress when the BBL relaminarizes. We validate these relationships using output from a suite of three-dimensional large-eddy simulations. We conclude that the BBL reaches the relaminarized state before the steady Ekman arrested state. Calculating H/Ha and H/HL from measurements will provide information on the stage of oceanic BBL development being observed. These diagnostics may also help to improve numerical parameterizations of stratified BBL dynamics over sloping topography.</jats:p
Application of Data Compression Methods to the Redshift-space distortions of the PSCz galaxy catalogue
We apply a spherical harmonic analysis to the Point Source Redshift Survey (PSCz), to compute the real-space galaxy power spectrum and the degree of redshift distortion caused by peculiar velocities. We employ new parameter eigenvector and hierarchical data compression techniques, allowing a much larger number of harmonic modes to be included, and correspondingly smaller error bars. Using 4644 harmonic modes, compressed to 2278, we find that the IRAS redshift-space distortion parameter is and the amplitude of galaxy clustering on a scale of is . Combining these we find the amplitude of mass perturbations is . A preliminary model fitting analysis combining the PSCz amplitudes with the CMB and abundance of clusters yields the cosmological matter density parameter , the amplitude of primordial perturbations , and the IRAS bias parameter
Redshift Distortions and Clustering in the PSCz Survey
We have constrained the redshift-distortion parameter and the real-space power spectrum of the IRAS PSCz survey using a spherical-harmonic redshift-distortion analysis combined with a data compression method which is designed to deal with correlated parameters. Our latest result, , strongly rules out
Self-compassion and physical health: Exploring the roles of perceived stress and health-promoting behaviors
Growing evidence indicates that self-compassion is associated with better physical health, but the pathways that mediate this relationship are not well understood. This study tested a serial mediation model that linked self-compassion, perceived stress, health behaviors, and a comprehensive index of physical health. A sample of 176 individuals completed an online survey posted on Amazon’s Mechanical Turk. Self-compassion had an indirect effect on physical health via both mediators as well as through the sequential pathway, suggesting that taking a kind, accepting and mindful stance toward one’s flaws and failures may have benefits for reducing stress and promoting health behaviors
Recommended from our members
Multiple sclerosis susceptibility alleles in African Americans.
Multiple sclerosis (MS) is an autoimmune demyelinating disease characterized by complex genetics and multifaceted gene-environment interactions. Compared to whites, African Americans have a lower risk for developing MS, but African Americans with MS have a greater risk of disability. These differences between African Americans and whites may represent differences in genetic susceptibility and/or environmental factors. SNPs from 12 candidate genes have recently been identified and validated with MS risk in white populations. We performed a replication study using 918 cases and 656 unrelated controls to test whether these candidate genes are also associated with MS risk in African Americans. CD6, CLEC16a, EVI5, GPC5, and TYK2 contained SNPs that are associated with MS risk in the African American data set. EVI5 showed the strongest association outside the major histocompatibility complex (rs10735781, OR=1.233, 95% CI=1.06-1.43, P-value=0.006). In addition, RGS1 seems to affect age of onset whereas TNFRSF1A seems to be associated with disease progression. None of the tested variants showed results that were statistically inconsistent with the effects established in whites. The results are consistent with shared disease genetic mechanisms among individuals of European and African ancestry
Cross infection control measures and the treatment of patients at risk of Creutzfeldt Jakob disease in UK general dental practice
AIMS: To determine the suitability of key infection control measures currently employed in UK dental practice for delivery of dental care to patients at risk of prion diseases. MATERIALS AND METHODS: Subjects: Five hundred dental surgeons currently registered with the General Dental Council of the UK. Data collection: Structured postal questionnaire. Analysis: Frequencies, cross-tabulations and chi-squared analysis. RESULTS: The valid response rate to the questionnaire was 69%. 33% of practices had no policy on general disinfection and sterilisation procedures. Only 10 of the 327 responding practices (3%) possessed a vacuum autoclave. 49% of dentists reported using the BDA medical history form but less than 25% asked the specific questions recommended by the BDA to identify patients at risk of iatrogenic or familial CJD. However, 63% of practitioners would refer such patients, if identified, to a secondary care facility. Of the 107 practitioners who were prepared to provide dental treatment, 75 (70%) would do so using routine infection control procedures. CONCLUSIONS: Most of the dental practices surveyed were not actively seeking to identify patients at risk of prion diseases. In many cases, recommended procedures for providing safe dental care for such patients were not in place
Challenges in Chagas Disease Drug Development.
The protozoan parasite Trypanosoma cruzi causes Chagas disease, an important public health problem throughout Latin America. Current therapeutic options are characterised by limited efficacy, long treatment regimens and frequent toxic side-effects. Advances in this area have been compromised by gaps in our knowledge of disease pathogenesis, parasite biology and drug activity. Nevertheless, several factors have come together to create a more optimistic scenario. Drug-based research has become more systematic, with increased collaborations between the academic and commercial sectors, often within the framework of not-for-profit consortia. High-throughput screening of compound libraries is being widely applied, and new technical advances are helping to streamline the drug development pipeline. In addition, drug repurposing and optimisation of current treatment regimens, informed by laboratory research, are providing a basis for new clinical trials. Here, we will provide an overview of the current status of Chagas disease drug development, highlight those areas where progress can be expected, and describe how fundamental research is helping to underpin the process
- …