2,608 research outputs found
Comparison of the full potential and Euler formulations for computing transonic airfoil flows
A quantitative comparison between the Euler and full potential formulations with respect to speed and accuracy is presented. The robustness of the codes used is tested by a number of transonic airfoil cases. The computed results are from four transonic airfoil computer codes. The full potential codes use fully implicit iteration algorithms. The first Euler code uses a fully implicit ADI iteration scheme. The second Euler code uses an explicit Runge Kutta time stepping algorithm which is enhanced by a multigrid convergence acceleration scheme. Quantitative comparisons are made using various plots of lift coefficient versus the average mesh spacing along the airfoil. Besides yielding an asymptotic limit to the lift coefficient, these results also demonstrate the truncation error behavior of the various codes. Quantitative conclusions regarding the full potential and Euler formulations with respect to accuracy, speed, and robustness can be presented
A comparison of two central difference schemes for solving the Navier-Stokes equations
Five viscous transonic airfoil cases were computed by two significantly different computational fluid dynamics codes: An explicit finite-volume algorithm with multigrid, and an implicit finite-difference approximate-factorization method with Eigenvector diagonalization. Both methods are described in detail, and their performance on the test cases is compared. The codes utilized the same grids, turbulence model, and computer to provide the truest test of the algorithms. The two approaches produce very similar results, which, for attached flows, also agree well with experimental results; however, the explicit code is considerably faster
Product Placement Decisions On-Set
This thesis is an ethnographic study of the product placement decisions made on-set during the production of a feature film. A concise historical review of the use of products in film and television is followed by an overview of the current research literature. The literature overview reveals a need for specific additional research. The research question which directed the present study intends to add to the existing literature: product placement is part of a creative decision-making process that happens throughout production on-set with filmmakers using products to help tell their story. The method used to approach the research question is an ethnographic observation of the decision-making process on-set, supplemented by interviews with professionals in props, art and set decorating departments. The findings present the results of the study summarizing the observations and interviews supporting the research question. The last section outlines the conclusions and areas that call for further research
Two-Dimensional Inlet Simulation Using a Diagonal Implicit Algorithm
A modification of an implicit approximate-factorization finite-difference algorithm applied to the two-dimensional Euler and Navier-Stokes equations in general curvilinear coordinates is presented for supersonic freestream flow about and through inlets. The modification transforms the coupled system of equations Into an uncoupled diagonal form which requires less computation work. For steady-state applications the resulting diagonal algorithm retains the stability and accuracy characteristics of the original algorithm. Solutions are given for inviscid and laminar flow about a two-dimensional wedge inlet configuration. Comparisons are made between computed results and exact theory
Analysis of the convergence history of fluid flow through nozzles with shocks
Convergence of iterative methods for the solution of the steady quasi-one-dimensional nozzle problem with shocks is considered. The finite-difference algorithms obtained from implicit schemes are used to approximate both the Euler and Navier-Stokes Equations. These algorithms are investigated for stability and convergence characteristics. The numerical methods are broken down into their matrix-vector components and then analyzed by examining a subset of the eigensystem using a method based on the Arnoldi process. The eigenvalues obtained by this method are accurate to within 5 digits for the largest ones and to within 2 digits for the ones smaller in magnitude compared the elgenvalues obtained using the full Jacobian. In the analysis we examine the functional relationship between the numerical parameters and the rate of convergence of the iterative scheme. Acceleration techniques for iterative methods like Wynn\u27s e-algorithm are also applied to these systems of difference equations in order to accelerate their convergence. This acceleration translates into savings in the total number of iterations and thus the total amount of computer time required to obtain a converged solution. The rate of convergence of the accelerated system is found to agree with the prediction based on the eigenvalues of the original iteration matrix. The ultimate goal of this study is to extend this elgenvalue analysis to multi-dimensional problems and to quantitatively estimate the effects of different parameters on the rate of convergence
Boundary Condition Study for the Juncture Flow Experiment in the NASA Langley 14x22-Foot Subsonic Wind Tunnel
Because future wind tunnel tests associated with the NASA Juncture Flow project are being designed for the purpose of CFD validation, considerable effort is going into the characterization of the wind tunnel boundary conditions, particularly at inflow. This is important not only because wind tunnel flowfield nonuniformities can play a role in integrated testing uncertainties, but also because the better the boundary conditions are known, the better CFD can accurately represent the experiment. This paper describes recent investigative wind tunnel tests involving two methods to measure and characterize the oncoming flow in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The features of each method, as well as some of their pros and cons, are highlighted. Boundary conditions and modeling tactics currently used by CFD for empty-tunnel simulations are also described, and some results using three different CFD codes are shown. Preliminary CFD parametric studies associated with the Juncture Flow model are summarized, to determine sensitivities of the flow near the wing-body juncture region of the model to a variety of modeling decisions
Nitric oxide availability is increased in contracting skeletal muscle from aged mice, but does not differentially decrease muscle superoxide
Reactive oxygen and nitrogen species have been implicated in the loss of skeletal muscle mass and function that occurs during aging. Nitric oxide (NO) and superoxide are generated by skeletal muscle and where these are generated in proximity their chemical reaction to form peroxynitrite can compete with the superoxide dismutation to hydrogen peroxide. Changes in NO availability may therefore theoretically modify superoxide and peroxynitrite activities in tissues, but published data are contradictory regarding aging effects on muscle NO availability. We hypothesised that an age-related increase in NO generation might increase peroxynitrite generation in muscles from old mice, leading to an increased nitration of muscle proteins and decreased superoxide availability. This was examined using fluorescent probes and an isolated fiber preparation to examine NO content and superoxide in the cytosol and mitochondria of muscle fibers from adult and old mice both at rest and following contractile activity. We also examined the 3-nitrotyrosine (3-NT) and peroxiredoxin 5 (Prx5) content of muscles from mice as markers of peroxynitrite activity. Data indicate that a substantial age-related increase in NO levels occurred in muscle fibers during contractile activity and this was associated with an increase in muscle eNOS. Muscle proteins from old mice also showed an increased 3-NT content. Inhibition of NOS indicated that NO decreased superoxide bioavailability in muscle mitochondria, although this effect was not age related. Thus increased NO in muscles of old mice was associated with an increased 3-NT content that may potentially contribute to age-related degenerative changes in skeletal muscle
Group formation under limited resources: narrow basin of equality
The formation of groups in competition and the aggressive interactions between them are ubiquitous phenomena in society. These include student activities in the classroom, election races between political parties, and intensifying trade wars between countries. Why do individuals form themselves into groups? What is the optimal size of groups? And how does the group size distribution affect resource allocations? These questions have been the subjects of intense research in economics, political science, sociology, and ethology. In this study, we explore the group-size effects on the formation of groups and resource allocations from an economic standpoint. While being in a large group is generally advantageous in competition, an increase in the management costs would set an upper bound to the individual benefit of members. Under such counteracting size effects, we consider the dynamics of group formation in which people seek a conservative measure to reduce their possible maximum loss. We are especially interested in the effects of group size on social inequalities at both group and individual level in resource allocation. Our findings show that the low positive size-effect and the high negative size-effect result in different types of social inequalities. We conclude, from the relation between the inequality measures and group distributions predicted within the model, that overall social equality only can be achieved within a narrow region where two counteracting size-effects are balanced
- …