Acute neuroinflammation induces AIS structural plasticity in a NOX2-dependent manner

Background Chronic microglia-mediated inflammation and oxidative stress are well-characterized underlying factors in neurodegenerative disease, whereby reactive inflammatory microglia enhance ROS production and impact neuronal integrity. Recently, it has been shown that during chronic inflammation, neuronal integrity is compromised through targeted disruption of the axon initial segment (AIS), the axonal domain critical for action potential initiation. AIS disruption was associated with contact by reactive inflammatory microglia which wrap around the AIS, increasing association with disease progression. While it is clear that chronic microglial inflammation and enhanced ROS production impact neuronal integrity, little is known about how acute microglial inflammation influences AIS stability. Here, we demonstrate that acute neuroinflammation induces AIS structural plasticity in a ROS-mediated and calpain-dependent manner. Methods C57BL/6J and NOX2−/− mice were given a single injection of lipopolysaccharide (LPS; 5 mg/kg) or vehicle (0.9% saline, 10 mL/kg) and analyzed at 6 h–2 weeks post-injection. Anti-inflammatory Didox (250 mg/kg) or vehicle (0.9% saline, 10 mL/kg) was administered beginning 24 h post-LPS injection and continued for 5 days; animals were analyzed 1 week post-injection. Microglial inflammation was assessed using immunohistochemistry (IHC) and RT-qPCR, and AIS integrity was quantitatively analyzed using ankyrinG immunolabeling. Data were statistically compared by one-way or two-way ANOVA where mean differences were significant as assessed using Tukey’s post hoc analysis. Results LPS-induced neuroinflammation, characterized by enhanced microglial inflammation and increased expression of ROS-producing enzymes, altered AIS protein clustering. Importantly, inflammation-induced AIS changes were reversed following resolution of microglial inflammation. Modulation of the inflammatory response using anti-inflammatory Didox, even after significant AIS disruption occurred, increased the rate of AIS recovery. qPCR and IHC analysis revealed that expression of microglial NOX2, a ROS-producing enzyme, was significantly increased correlating with AIS disruption. Furthermore, ablation of NOX2 prevented inflammation-induced AIS plasticity, suggesting that ROS drive AIS structural plasticity. Conclusions In the presence of acute microglial inflammation, the AIS undergoes an adaptive change that is capable of spontaneous recovery. Moreover, recovery can be therapeutically accelerated. Together, these findings underscore the dynamic capabilities of this domain in the presence of a pathological insult and provide evidence that the AIS is a viable therapeutic target

A Simple Algorithm of Mixing Technique of Digital Eddy Current Signals for Steam Generator Tubes

For PWR power plants, the steam generator (SG) provides a dynamic link between the reactor and the turbine generator. A steam generator typically consists of Inconel tubes anchored at intervals with stainless steel support plates. The primary coolant from the nuclear reactor circulates through these tubes. Heat, transferred to the secondary coolant by conduction through the tube wall, generating steam which is used for running the turbine

3D Landslide Models in VR

peer reviewedThe present paper describes the elaboration of 3D surface and geological models generated for a series of landslide sites, zones marked by large incipient slope failures, or those presenting structural characteristics of an ancient giant mass movement. For both, surface and geological models, high-resolution satellite or drone imagery was draped on the digital elevation model constructed from the same imagery or using Radar or LiDAR data. The geological models further include geophysical data, supported by differential GPS measurements, complemented by georeferenced geological and tectonic maps and related geological sections. The soft layer thickness information and borehole data are typically represented in terms of logs inside the model. For several sites also slope stability analyses were performed, either in 2D or in 3D. Inputs for those analyses were directly extracted from the 3D geomodels, outputs were again represented in the models. Some of those models, such as the one produced for the right-bank slopes of the Rogun Dam construction site can be quite complex and we clearly could notice that an immersive analysis using VR technology helps understand their internal structure and perform a better slope stability analysis. Still these analyses have their limits, as a study in Virtual Reality is purely individual (at present time, the visiting researcher is separated from the rest of the World). Therefore, we suggest that a real advancement can only be achieved if the technological developments go along with a stronger collaboration between scientists from the various geo-domains, who could also be immersed in the same virtual model (~collaborative VR)

Overturning established chemoselectivities : selective reduction of arenes over malonates and cyanoacetates by photoactivated organic electron donors

The prevalence of metal-based reducing reagents, including metals, metal complexes, and metal salts, has produced an empirical order of reactivity that governs our approach to chemical synthesis. However, this reactivity may be influenced by stabilization of transition states, intermediates, and products through substrate-metal bonding. This article reports that in the absence of such stabilizing interactions, established chemoselectivities can be overthrown. Thus, photoactivation of the recently developed neutral organic superelectron donor 5 selectively reduces alkyl-substituted benzene rings in the presence of activated esters and nitriles, in direct contrast to metal-based reductions, opening a new perspective on reactivity. The altered outcomes arising from the organic electron donors are attributed to selective interactions between the neutral organic donors and the arene rings of the substrates

The Ontario Mother and Infant Study (TOMIS) III: A multi-site cohort study of the impact of delivery method on health, service use, and costs of care in the first postpartum year

Abstract Background The caesarean section rate continues to rise globally. A caesarean section is inarguably the preferred method of delivery when there is good evidence that a vaginal delivery may unduly risk the health of a woman or her infant. Any decisions about delivery method in the absence of clear medical indication should be based on knowledge of outcomes associated with different childbirth methods. However, there is lack of sold evidence of the short-term and long-term risks and benefits of a planned caesarean delivery compared to a planned vaginal delivery. It also is important to consider the economic aspects of caesarean sections, but very little attention has been given to health care system costs that take into account services used by women for themselves and their infants following hospital discharge. Methods and design The Ontario Mother and Infant Study III is a prospective cohort study to examine relationships between method of delivery and maternal and infant health, service utilization, and cost of care at three time points during the year following postpartum hospital discharge. Over 2500 women were recruited from 11 hospitals across the province of Ontario, Canada, with data collection occurring between April 2006 and October 2008. Participants completed a self-report questionnaire in hospital and structured telephone interviews at 6 weeks, 6 months, and 12 months after discharge. Data will be analyzed using generalized estimating equation, a special generalized linear models technique. A qualitative descriptive component supplements the survey approach, with the goal of assisting in interpretation of data and providing explanations for trends in the findings. Discussion The findings can be incorporated into patient counselling and discussions about the advantages and disadvantages of different delivery methods, potentially leading to changes in preferences and practices. In addition, the findings will be useful to hospital- and community-based postpartum care providers, managers, and administrators in guiding risk assessment and early intervention strategies. Finally, the research findings can provide the basis for policy modification and implementation strategies to improve outcomes and reduce costs of care

Ionization Electron Signal Processing in Single Phase LArTPCs II. Data/Simulation Comparison and Performance in MicroBooNE

The single-phase liquid argon time projection chamber (LArTPC) provides a large amount of detailed information in the form of fine-grained drifted ionization charge from particle traces. To fully utilize this information, the deposited charge must be accurately extracted from the raw digitized waveforms via a robust signal processing chain. Enabled by the ultra-low noise levels associated with cryogenic electronics in the MicroBooNE detector, the precise extraction of ionization charge from the induction wire planes in a single-phase LArTPC is qualitatively demonstrated on MicroBooNE data with event display images, and quantitatively demonstrated via waveform-level and track-level metrics. Improved performance of induction plane calorimetry is demonstrated through the agreement of extracted ionization charge measurements across different wire planes for various event topologies. In addition to the comprehensive waveform-level comparison of data and simulation, a calibration of the cryogenic electronics response is presented and solutions to various MicroBooNE-specific TPC issues are discussed. This work presents an important improvement in LArTPC signal processing, the foundation of reconstruction and therefore physics analyses in MicroBooNE.Comment: 54 pages, 36 figures; the first part of this work can be found at arXiv:1802.0870

Design and construction of the MicroBooNE Cosmic Ray Tagger system

The MicroBooNE detector utilizes a liquid argon time projection chamber (LArTPC) with an 85 t active mass to study neutrino interactions along the Booster Neutrino Beam (BNB) at Fermilab. With a deployment location near ground level, the detector records many cosmic muon tracks in each beam-related detector trigger that can be misidentified as signals of interest. To reduce these cosmogenic backgrounds, we have designed and constructed a TPC-external Cosmic Ray Tagger (CRT). This sub-system was developed by the Laboratory for High Energy Physics (LHEP), Albert Einstein center for fundamental physics, University of Bern. The system utilizes plastic scintillation modules to provide precise time and position information for TPC-traversing particles. Successful matching of TPC tracks and CRT data will allow us to reduce cosmogenic background and better characterize the light collection system and LArTPC data using cosmic muons. In this paper we describe the design and installation of the MicroBooNE CRT system and provide an overview of a series of tests done to verify the proper operation of the system and its components during installation, commissioning, and physics data-taking

Ionization Electron Signal Processing in Single Phase LArTPCs I. Algorithm Description and Quantitative Evaluation with MicroBooNE Simulation

We describe the concept and procedure of drifted-charge extraction developed in the MicroBooNE experiment, a single-phase liquid argon time projection chamber (LArTPC). This technique converts the raw digitized TPC waveform to the number of ionization electrons passing through a wire plane at a given time. A robust recovery of the number of ionization electrons from both induction and collection anode wire planes will augment the 3D reconstruction, and is particularly important for tomographic reconstruction algorithms. A number of building blocks of the overall procedure are described. The performance of the signal processing is quantitatively evaluated by comparing extracted charge with the true charge through a detailed TPC detector simulation taking into account position-dependent induced current inside a single wire region and across multiple wires. Some areas for further improvement of the performance of the charge extraction procedure are also discussed.Comment: 60 pages, 36 figures. The second part of this work can be found at arXiv:1804.0258