12,235 research outputs found
Life prediction and constitutive models for engine hot section anisotropic materials program
The purpose is to develop life prediction models for coated anisotropic materials used in gas temperature airfoils. Two single crystal alloys and two coatings are now being tested. These include PWA 1480; Alloy 185; overlay coating, PWA 286; and aluminide coating, PWA 273. Constitutive models are also being developed for these materials to predict the plastic and creep strain histories of the materials in the lab tests and for actual design conditions. This nonlinear material behavior is particularily important for high temperature gas turbine applications and is basic to any life prediction system
A constitutive model for an overlay coating
Coatings are frequently applied to gas turbine blades and vanes to provide protection against oxidation and corrosion. The results of an experimental and analytical study to develop a constitutive model for an overlay coating is presented. Specimens were machined from a hot isostatically pressed billet of PWA 286. The tests consisted of isothermal stress relaxation cycles with monotonically increasing maximum strain and were conducted at various temperatures. The results were used to calculate the constants for various constitutive models, including the classical, the Walker isotropic, a simplified Walker, and Stowell models. A computerized regression analysis was used to calculate model constants from the data. The best fit was obtained for the Walker model, with the simplified Walker and classical models close behind
Notched fatigue of single crystal PWA 1480 at turbine attachment temperatures
The focus is on the lower temperature, uncoated and notched features of gas turbine blades. Constitutive and fatigue life prediction models applicable to these regions are being developed. Fatigue results are presented which were obtained thus far. Fatigue tests are being conducted on PWA 1480 single crystal material using smooth strain controlled specimens and three different notched specimens. Isothermal fatigue tests were conducted at 1200, 1400, and 1600 F. The bulk of the tests were conducted at 1200 F. The strain controlled tests were conducted at 0.4 percent per second strain rate and the notched tests were cycled at 1.0 cycle per second. A clear orientation dependence is observed in the smooth strain controlled fatigue results. The fatigue lifes of the thin, mild notched specimens agree fairly well with this smooth data when elastic stress range is used as a correlating parameter. Finite element analyses were used to calculate notch stresses. Fatigue testing will continue to further explore the trends observed thus far. Constitutive and life prediction models are being developed
Radiation counting technique allows density measurement of metals in high-pressure/ high-temperature environment
Radioactive tracers induced by neutron irradiation provide a gamma ray flux proportional to the density of a metal, allowing density measurement of these metals in extreme high-temperature and high-pressure environments. This concept is applicable to most metals, as well as other substances
Life prediction and constitutive models for engine hot section
The purpose of this program is to develop life prediction models for coated anisotropic materials used in gas turbine airfoils. In the program, two single crystal alloys and two coatings are being tested. These include PWA 1480, Alloy 185, overlay coating (PWA 286), and aluminide coating (PWA 273). Constitutive models are also being developed for these materials to predict the time independent (plastic) and time dependent (creep) strain histories of the materials in the lab tests and for actual design conditions. This nonlinear material behavior is particularly important for high temperature gas turbine applications and is basic to any life prediction system. Some of the accomplishments of the program are highlighted
Roots of accounting
This paper presents some evidence that rudimentary accounting (economic recordkeeping) may have predated both counting and writing
High temperature constitutive and crack initiation modeling of coated single crystal superalloys
The purpose of this program is to develop life prediction models for anisotropic materials used in gas turbine airfoils. In the base portion of the program, two coated single crystal alloys are being tested. They are PWA 286 overlay coated and PWA 273 aluminide coated PWA 1480 and PWA 286 overlay coated Alloy 185. Viscoplastic constitutive models for these materials are also being developed to predict the cyclic stress-strain histories required for life prediction of the lab specimens and actual airfoil designs
Interaction between Faraday rotation and Cotton-Mouton effects in polarimetry modeling for NSTX
The evolution of electromagnetic wave polarization is modeled for propagation
in the major radial direction in the National Spherical Torus Experiment (NSTX)
with retroreflection from the center stack of the vacuum vessel. This modeling
illustrates that the Cotton-Mouton effect-elliptization due to the magnetic
field perpendicular to the propagation direction-is shown to be strongly
weighted to the high-field region of the plasma. An interaction between the
Faraday rotation and Cotton-Mouton effects is also clearly identified.
Elliptization occurs when the wave polarization direction is neither parallel
nor perpendicular to the local transverse magnetic field. Since Faraday
rotation modifies the polarization direction during propagation, it must also
affect the resultant elliptization. The Cotton-Mouton effect also intrinsically
results in rotation of the polarization direction, but this effect is less
significant in the plasma conditions modeled. The interaction increases at
longer wavelength, and complicates interpretation of polarimetry measurements.Comment: Contributed paper published as part of the Proceedings of the 18th
Topical Conference on High-Temperature Plasma Diagnostics, Wildwood, New
Jersey, May, 201
Brief Note Are Geographic Effects on Life Expectancy in Ohio Spurious Because of Race?
Author Institution: Department of Sociology, Bowling Green State UniversityThe possibility that significant geographic effects on life expectancy found in Ohio may have been spurious because of race is tested in this paper, which utilizes a regression-based technique to estimate life expectancy for selected cities and their suburbs. Using multivariate analysis in conjunction with race-specific regression models we find that, although white life expectancy values exceed those of blacks, the geographic effects described in an earlier paper were not spurious. Because socioeconomic status is associated with both race and geography, these findings provide support for the argument that socioeconomic status plays an instrumental role in differential life expectancy
Geographic Variation of Longevity in Ohio, 1930 and 1980
Author Institution: Department of Sociology, Bowling Green State UniversityAt broad levels (i.e., urban and rural, north and south, state-by-state), variations in longevity have been recorded over time in the United States and elsewhere. However, there is little information on life expectancy variation for specific small areas such as cities and suburbs over time. This is understandable because life expectancy is usually calculated by constructing a life table which has rigorous requirements not usually met by published data for small areas. In this paper, we use a regression-based technique to estimate life expectancy in 1930 and 1980 for selected cities and their suburbs as well as rural counties in Ohio. We examine the variation and changes in life expectancy through multivariate analysis, and find that while differences have narrowed between 1930 and 1980, significant variations in longevity persist among suburban, urban, and rural areas in Ohio
- …